102 Windows and Sliding Roofs
Roller blind cleaning position
1. Close Panorama roof system and roller blind
completely.
2. Turn rotary switch to position C.
The Panorama roof system opens completely.
3. When the Panorama roof system has reached
the final position, keep the rocker switch G
pressed at the front for longer than 3 seconds
until the roller blind is completely closed.
4. Remove dirt (e.g. leaves).
5. Keep the rocker switch F pressed at the rear
until the roller blind is completely closed.
6. Close sliding roof element.
Caution!
Risk of damage if the Panorama roof system
and roller blind are in the roller blind
cleaning position while driving.
f Close the Panorama roof system completely
once before driving off.
Emergency operation of the
Panorama roof system
Perform emergency operation only under excep-
tional circumstances if the electric emergency
closing function cannot be performed and the end
position cannot be stored.
f Before performing emergency operation,
please check whether the fuse is defective.
After the fuse has been changed, the end
positions of the Panorama roof system must
be stored again.
Warning!
Danger of injury and risk of damage when
closing the roof.
f Take care to ensure that nobody can be injured
when the roof elements are operated.
f Do not operate the Panorama roof system with
the rotary switch during and after emergency
operation.
1. Fold up armrest.
2. Remove key B from the lower oddments tray
(underneath the rubber mat) in the centre
console.
English 
