2002-2010 Porsche Cayenne SUV Windows and Sliding Roofs -> Panorama roof system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Windows and Sliding Roofs -> Panorama roof system for Your Porsche Cayenne SUV First Generation (2002-2010)

98 Windows and Sliding Roofs
Panorama roof system
The Panorama roof system of your Porsche
consists of a total of four roof elements.
Roof element 1 is the draught deflector. This
adjusts itself according to the speed, and helps
protect from the disturbing effects of the wind
when the Panorama roof system is open,
especially at high speeds or in the case of
turbulent air flow.
Both roof elements 2 and 3 can be moved in the
vehicle’s longitudinal direction by operating the
rotary switch. Roof element 3 can also be raised.
This allows the interior to be better ventilated.
Roof element 4 is a fixed glass element and
completes the Panorama roof system.
1 - Draught deflector
2 - Sliding roof element
3 - Sliding/lifting roof element
4 - Fixed glass element
Caution!
Risk of damage when activating the
Panorama roof system due to improperly
fitted roof superstructures.
f Check that the roof superstructures are
properly fitted before starting to drive.
f Make sure that there is sufficient clearance
between the Panorama roof system and the
fitted roof superstructures.
Readiness for operation of the Panorama
roof system
– With ignition switched on.
– With ignition key withdrawn until door is first
opened, but only for a maximum of
10 minutes.
Readiness function of Panorama roof
system switches off after 10 minutes
If the vehicle is unlocked, the Panorama roof
system can no longer be operated after
10 minutes (to save the vehicle battery). The
power supply is switched back on when the
ignition is switched on or the engine is started.
Windows and Sliding Roofs 99
A - Close the Panorama roof system completely
B - Open sliding roof element
C - Completely open Panorama roof system
D - Lift sliding/lifting roof element
E - Open sliding/lifting roof element
Note on operation
Using the automated presetting system, every
usable roof position can be controlled directly with
the rotary switch.
f Always keep the Panorama roof system and
the side windows closed while driving off-road.
Warning!
Risk of injury when operating or automati-
cally closing the Panorama roof system.
f Take care to ensure that nobody can be injured
when the Panorama roof system is operated.
f Always withdraw ignition key when leaving the
vehicle or switch ignition off on vehicles that
have Porsche Entry & Drive. Always take the
ignition key with you when leaving the vehicle.
Uninformed persons (e.g. children) could injure
themselves by operating the Panorama roof
system.
f In case of danger, operate the rotary switch in
the opposite direction or release the vehicle
key immediately.
A - Close Panorama roof system
completely
f Turn rotary switch to position A.
B - Open sliding roof element completely
f Turn rotary switch to position B.
Roof element 2 is opened completely. The
roller blind opens automatically to the selected
opening width.
C - Completely open Panorama roof
system
f Turn rotary switch beyond stop position B to
switch position C.
Roof elements 2 and 3 are opened
completely.
The roller blind opens automatically to the
selected opening width.
D - Lift sliding/lifting roof element
f Turn rotary switch to position D.
Roof element 3 is lifted completely. The roller
blind does not change its position here.
E - Completely open sliding/lifting roof
element
f Turn rotary switch to position E.
f Roof element 3 is opened completely. The
roller blind opens automatically to the selected
opening width.
100 Windows and Sliding Roofs
Comfort function on vehicles without
Porsche Entry & Drive
Opening and closing the Panorama roof
system
f Hold the car key in the door lock in the
unlocking or locking position until the windows
and the Panorama roof system have reached
the desired position.
Comfort function on vehicles with
Porsche Entry & Drive
Opening and closing the Panorama roof
system
f Hold the car key in the door lock in the
unlocking or locking position until the windows
and the Panorama roof system have reached
the desired position.
Closing the Panorama roof system
f Hold the button in the door handle when
locking the vehicle until the windows and the
Panorama roof system have reached the
desired position.
Force limiter for the Panorama roof
system
All roof elements are equipped with a force limiter.
If the sliding roof element or the sliding roof/lifting
roof element is obstructed during the closing or
opening process, the respective roof element
opens or closes again immediately.
Closing a roof element after activation of the
force limiter
1. Remove the obstruction.
2. Turn rotary switch to position A again.
Electric emergency closing function
Warning!
Risk of injury from the emergency closing
function for the Panorama roof system. The
force limiter is not available and the roof
elements will close with full force.
f Take care to ensure that nobody can be injured
when the Panorama roof system is closed.
If the roof cannot be closed due to dirt, ice or a
similar reason:
1. Turn rotary switch to position A.
2. Hold the rotary switch in position A until all roof
elements are completely closed.
Storing final position of the Panorama
roof system
The final positions of the Panorama roof system
are lost after disconnecting/reconnecting the
vehicle battery or if the battery is exhausted as
well as after jump lead starting.
Warning!
Risk of injury when closing the Panorama
roof system. The force limiter is not available
and the roof elements will close with full
force.
f Take care to ensure that nobody can be injured
when the Panorama roof system is closed.
1. Switch ignition off.
2. Turn rotary switch to position A.
3. Switch ignition on.
4. Press rotary switch up at its front edge in
position A and keep pressed.
The teaching process begins after around
5 seconds. Keep the rotary switch pressed in
position until the roller blind and all roof
elements have completely stopped moving.
The process lasts a maximum of 20 seconds.
5. Release the rotary switch.
The raised sliding/lifting roof element 3 closes
automatically. The teaching process is then
completed.
Windows and Sliding Roofs 101
Note on operation
If the procedure is interrupted, saving the final
positions must be started from the beginning
again.
Roller blind
A roller blind is integrated into the Panorama roof
system and can be adjusted by operating the
rocker switch in the roof console.
Opening/closing roller blind
The rocker switch has a two-stage function:
– If the rocker switch is pressed to the first
stage, the roller blind is opened or closed as
long as the rocker switch is being pressed.
– If the rocker switch is pressed completely, the
roller blind opens or closes to the final
position.
Opening the roller blind
f Press rocker switch to the rear F.
Closing the roller blind
f Press rocker switch to the front G.
Note
If the rocker switch is pressed completely while
the roof elements are moving, the roller blind
opens or closes to the final position after the roof
elements have reached the selected position.

Related Topics

Popular Owner Manuals