2011-2017 Porsche Cayenne SUV Storage, Luggage Compartment and Roof Transport System User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Storage, Luggage Compartment and Roof Transport System for Your Porsche Cayenne SUV Second Generation (2011-2017)

Storage, Luggage Compartment and Roof Transport System 203
Storage, Luggage Compartment and Roof Transport System
Loadspace ................................................ 204
Cargo Management System ........................ 205
Luggage Compartment Cover ..................... 208
Luggage Safety Net ................................... 209
Ski Bag ..................................................... 211
Roof Transport System............................... 212
Storage..................................................... 215
Cupholder.................................................. 216
Front Ashtray/Storage Compartment ........... 217
Rear Ashtray.............................................. 218
Cigarette Lighter ........................................ 218
204 Storage, Luggage Compartment and Roof Transport System
Loadspace
The maximum permissible load on the loadspace
floor is 880 lbs (400 kg). The weight must be
distributed evenly over the entire loadspace.
f For information on stowing loads and luggage:
Please see the chapter “LOADING
INFORMATION” on page 221.
Opening the loadspace floor
1. Pull handle A and lift the loadspace floor.
2. Unclip support arm B and insert it into fixing
recess C in the loadspace floor.
Closing the loadspace floor
1. Lift the loadspace floor and clip support arm B
into its holder in the vehicle floor.
2. Close the loadspace floor.
Tie-down rings
You can secure the load in the luggage
compartment to prevent it from slipping. Tie-down
straps or the luggage net can be fastened to the
tie-down rings D.
f Make sure that all rings are equally loaded
when securing a load.
Information
The tie-down rings are not designed to restrain
a heavy load in an accident.
Storage, Luggage Compartment and Roof Transport System 205
Cargo Management System
The cargo management system is a variable
system for securing objects in the luggage
compartment.
It comprises two telescopic rails integrated in the
loadspace, a telescopic bar, four tie-down rings
as well as a strap reel and a reversible mat.
The reversible mat has an anti-slip structure on the
underside.
f For information on stowing loads and luggage:
Please see the chapter “LOADING
INFORMATION” on page 221.
Inserting and adjusting the telescopic bar
1. Insert the two end elements of the telescopic
bar in the openings A of the mounting rails.
2. Press the end elements down and push against
the load. When the bar is correctly positioned,
the load should no longer be able to move.
3. Release the end elements.
4. Check that the elements are locked in position
by pushing against them.
Inserting and adjusting the strap reel
The strap reel is stored together with the tie-down
rings in the supplied bag in the luggage
compartment or in the spare-wheel well.
1. Take the strap reel out of the bag.
2. Press button B on the end element of the strap
reel and pull both elements out to the width of
the two mounting rails.
206 Storage, Luggage Compartment and Roof Transport System
3. Insert the two end elements of the strap reel in
the openings A of the mounting rails.
4. Press both end elements down and push
against the load.
5. Release the end elements.
6. Check that the elements are locked in position
by pushing against them.
7. Press button B and tension the strap so that
the load cannot move.
8. Release button B.
Inserting strap reel on one rail
1. Press button B on the end element and pull
both elements apart slightly.
2. Insert one end element of the strap reel in the
opening A of a mounting rail, press down and
slide into position.
3. Insert the second element in the same opening
A, press down and slide in the opposite
direction.
4. Check that the elements are locked in position
by pushing against them.
5. Press button B and place the strap around the
item of luggage.
Tension the belt so that the item of luggage
cannot move.
6. Release button B.
Storage, Luggage Compartment and Roof Transport System 207
Inserting and adjusting tie-down rings
Tie-down straps, the luggage net or the luggage
safety net can be fastened to the tie-down rings.
Make sure that all rings are equally loaded when
securing a load.
The tie-down rings are not designed to restrain
loads in serious accidents.
1. Insert the tie-down ring in the opening A of the
mounting rail.
2. Press button C down and slide the tie-down
ring in the corresponding direction.
3. Release button C.
4. Check that the tie-down ring is locked in
position by pushing it.
5. Insert the remaining tie-down rings.
Information
The opposing tie-down rings must always be
inserted in the opposite direction.
208 Storage, Luggage Compartment and Roof Transport System
Luggage Compartment Cover
Items in the luggage compartment may be hidden
from view by using the luggage compartment
cover.
f Always pull out the luggage compartment
cover when transporting objects in the
luggage compartment.
The luggage compartment cover is not
designed to carry objects.
f Do not hang bags or objects on the support
brackets. The support brackets can break off.
In the event of braking, direction changes or in an
accident, objects can slide into the passenger
compartment and endanger the occupants.
f Do not place objects on top of the luggage
compartment cover.
Pulling out luggage compartment cover
f Pull out the cover by the handle and insert it
into the guides on the left and right side walls.
Retracting luggage compartment cover
f Disengage the luggage compartment cover
from guides on the side walls and carefully
guide it back into the retractor roller.
Retractable covers
The area between the luggage compartment
cover and the adjustable rear seat backrests can
be covered by two retractable covers.
Pulling out retractable cover
f Pull the retractable cover forward and engage
it at the holders on the rear seat backrest.
Rolling in retractable cover
f Disengage the retractable cover from the
holders and carefully guide it back into the
retractor roller.
Information
f The retractable covers must be disengaged
when adjusting the rear seats (fore-and-aft
adjustment, backrest angle).
f When folding over the rear seat backrest,
first disengage the retractable cover from the
holder and guide it carefully back into the
retractor roller.
Misuse of Luggage
Compartment Cover
WARNING
h
Storage, Luggage Compartment and Roof Transport System 209
Removing luggage compartment cover
The luggage compartment cover is installed and
removed through the rear right door.
f First disengage the retractable covers from
the rear seat backrests and fold the backrests
forward.
Please see the chapter “FOLDING REAR SEAT
BACKRESTS FORWARD” on page 41.
1. Press the release button and slide the side
panel in direction of arrow.
2. Take the cover up out of the receiving holder
on the right side.
3. Then remove the cover on the left side.
4. Remove the cover from the vehicle through
the open door.
Installing luggage compartment cover
1. Insert the cover into the receiving holder on
the left side.
2. Insert the cover on the right side down into
the holder by pressing the release button and
sliding the side panel in direction of arrow.
3. Press the cover down until it locks securely
with an audible click.
4. Move the backrests into vertical position and
engage the retractable covers on the rear seat
backrests.
Luggage Safety Net
The luggage safety net can hold back only
lightweight objects in the event of braking,
changes in direction or in an accident.
f For information on stowing loads and luggage:
Please see the chapter “LOADING
INFORMATION” on page 221.
Unsecured loads can slip and endanger the
occupants in the event of braking, changes in
direction or in an accident.
f Always secure the passenger compartment
with the luggage safety net.
f Always fasten the load at the tie-down rings.
f Never load the vehicle higher than the top
edge of the seat backrest.
f If the luggage safety net was heavily stressed
or damaged during braking or in an accident
etc., have the safety net and its retaining
bracket checked by an authorized Porsche
dealer.
Unsecured Loads
WARNING
h
210 Storage, Luggage Compartment and Roof Transport System
Installing luggage safety net
Information
f When installing the luggage safety net, check
that the correct side of the net is facing to the
rear (see attached label A on the net).
Seat backrests not folded over
1. Engage the luggage safety net in the rear
fixing rings on the ceiling using the left and
right fastening hooks.
2. Position the tie-down rings in the loadspace
floor in such a way that they are the same
distance from the end of the rail. It must be
possible to tension the net vertically and the
net must not be bent around the rear seats.
3. Attach the luggage safety net in the tie-down
rings on the loadspace floor using the bottom
hooks.
4. Tighten the net by pulling on the belt strap.
Seat backrests folded over
f Fold backrests forward:
Please see the chapter “FOLDING REAR SEAT
BACKRESTS FORWARD” on page 41.
Always make sure that the backrests are
secured correctly.
1. Attach the luggage safety net in the front fixing
rings on the ceiling using the left and right
fastening hooks.
2. Attach the luggage safety net on the backrests
using the bottom hooks.
3. Tighten the net by pulling on the belt strap.
Storage, Luggage Compartment and Roof Transport System 211
Ski Bag
Snowboard or skis, can be transported neatly and
without damaging the passenger compartment.
3
Risk of damage to the ski bag from sharp edges
on the load (e.g. snowboard).
f Protect sharp edges on the load.
Putting snowboard or skis into the ski bag
1. Provide the snowboard or the skis with edge
protection.
2. Place the snowboard or the skis into the ski
bag and close it. The skis must be placed into
the ski bag with the rear ends facing the front
of the vehicle. The zip of the ski bag must face
the rear of the vehicle.
3. Tighten the snowboard or the skis with the
tightening strap. The bindings must be behind
this strap.
Loading and securing ski bag
1. Move the rear seats to the furthest rear
position.
Please see the chapter “REAR SEATS” on
page 40.
Alternatively, remove the middle headrest.
Please see the chapter “REMOVING AND
INSTALLING THE MIDDLE HEADREST OF THE
REAR SEAT” on page 36.
2. Lift up the belt buckle on the middle seat.
3. Fold the backrest on the middle rear seat
forward:
Please see the chapter “FOLDING MIDDLE
SEAT BACKREST FORWARD” on page 42.
4. Slide the ski bag through the loadspace over
the folded seat backrest.
Make sure not to damage the center console
with the ski bag.
5. Insert belt tongue into the buckle.
6. Tighten the belt.
Stowing the ski bag
1. Empty the ski bag and pull it into the
passenger compartment.
2. Adjust the middle seat backrest to vertical
position:
Please see the chapter “ADJUSTING MIDDLE
SEAT BACKREST TO VERTICAL POSITION” on
page 42.
3. Only fold up the ski bag when it is dry and store
it in the gear bag.
4. Secure the bag in the loadspace with the
Velcro strips.
Information
Maximum ski bag load (75 lbs (34 kg) total
weight):
– 4 pairs of normal carving skis with ski sticks
or
– 3 pairs of normal carving skis with ski sticks
and one snowboard.
NOTICE
212 Storage, Luggage Compartment and Roof Transport System
Roof Transport System
f Only use roof transport systems from the
Porsche Tequipment range for your vehicle or
roof transport systems that have been tested
and approved by Porsche. It is not possible to
fit commercially available roof rack systems.
The Porsche Roof Transport System allows you
to carry various sports and hobby equipment.
Your authorized Porsche dealer will be pleased to
tell you about the various different uses of the
Roof Transport System.
f Do not exceed the permissible roof load,
permissible gross weight and permissible axle
loads.
Details of these weights and loads can be
found under “Technical data” in this Owner’s
Manual:
Please see the chapter “WEIGHTS” on
page 312.
f Distribute load evenly, with heavy items as low
as possible. Items of luggage must not project
beyond the side of the load area.
f Fix and secure every item to the basic carrier
with a rope or lashing strap (do not use elastic
rubber tensioners).
f Before every trip, and at regular intervals
during long trips, check that the Roof
Transport System and load are secure. Re-
tighten if necessary and secure further by
locking. Tighten all fastening screws again.
When the Roof Transport System is loaded, the
maximum speeds depends on the nature, size and
weight of the load being carried.
f Driving, braking and steering behavior change
due to the higher center of gravity and the
greater wind resistance. You should adapt your
driving style accordingly.
Nevertheless, Porsche recommends that you
do not exceed the posted speed limit.
f Never drive faster than 90 mph (140 km/h)
when the Roof Transport System is fitted and
loaded.
f With the basic carrier fitted and no load, do not
exceed a maximum speed of 110 mph
(180 km/h).
Washing the vehicle in a car wash or failure to
observe the overall vehicle height or the permitted
gross weight can damage the vehicle or Roof
Transport System.
f Remove the roof transport system completely
before washing the vehicle in a car wash.
f Check the overall vehicle height with the Roof
Transport System fitted before driving into
multi-storey car parks, garages underground
garages and tunnels.
f Do not exceed the permissible roof load,
permissible gross weight and permissible axle
loads.
Details of these weights and loads can be
found under “Technical data” in this Owner’s
Manual:
Please see the chapter “WEIGHTS” on
page 312.
Information
f Since fuel consumption and noise are
increased with the Roof Transport System is
fitted, it should not remain on the vehicle if not
in use.
f For information on stowing loads and luggage:
Please see the chapter “LOADING
INFORMATION” on page 221.
Roof Load Instability
WARNING
h
NOTICE
Storage, Luggage Compartment and Roof Transport System 213
A - Front carrier bar
B - Rear carrier bar
C - Cover trims
D - Torque wrench
E - Key
Fitting carrier bars
A sticker on the underside of the carrier bars
identifies the front and rear bars (illustration).
f Fit the carrier bars so that the sticker is on the
left side of the vehicle.
Always observe these markings when fitting
the carrier bars on the roof rails.
1. Secure the carrier bars in the marked areas
only. There is one bore at the inside of each
roof rail. The locking pin in the support must
engage in this bore.
2. Open the cover on the supports in order to fit
the carrier bars. To do this, insert the key and
turn it counter-clockwise to the horizontal
position.
Then fold up the cover.
Information
Clean the carrier bar support area of the roof rails
before installing.
214 Storage, Luggage Compartment and Roof Transport System
3. Before fitting the carrier bars, unscrew the
fastening screws as far as they will go.
4. Carefully position the carrier bars on the roof
rails and straighten them. Guide the locking
pin A into the corresponding bore B in the roof
rail and secure it at this position.
5. Then tighten the tensioning screws in all the
supports to 6 ftlb. (8 Nm) one after the other
using the torque wrench. The two arrows on
the torque wrench must be perfectly aligned to
do this (6 ftlb./8 Nm). This secures the two
carrier bars both lengthwise and crosswise.
6. Close all covers and lock the locks. To do this,
turn the key clockwise to the vertical position
and remove it. Then fit the cover trims if
necessary.
Information
f Check the screws and fastenings after a short
trip, re-tighten them if necessary and check
them again at the relevant intervals.
f The screws must be checked more frequently
on bad roads. If this is not done, the Roof
Transport System can become loose or fall off
and can endanger other road users.
Storage, Luggage Compartment and Roof Transport System 215
Installing accessories
1. To install accessories, open the support cover
and fold it down.
Do not strain the folded-down cover.
2. Remove the profile trim and guide the
accessories into the available T-groove.
Close the support cover again.
3. Please observe the relevant installation
instructions for attaching and securing carrier
attachments.
Storage
Unsecured or incorrectly positioned loads can slip
and endanger the occupants in the event of
braking, changes in direction or in an accident.
f Do not transport items of luggage or objects
unsecured in the passenger compartment.
f Do not transport any heavy objects in open
storage trays.
f Always keep the covers of the storage trays
closed while driving.
f Always protect the passenger compartment
with a safety net and a luggage compartment
cover.
Information
An unsecured or incorrectly positioned load can
slip out of place or endanger the vehicle
occupants during braking, direction changes or in
accidents.
f For information on stowing loads and luggage:
Please see the chapter “LOADING
INFORMATION” on page 221.
Glove compartment
An open glove compartment may cause injury
during an accident.
f Keep the glove compartment closed while
driving.
The glove compartment contains a pen and paper
holder.
Opening
f Pull the latch handle (arrow) and open the lid.
Locking
f Always lock the latch handle with the
emergency key to secure the contents from
unauthorized access.
For information on cooling the glove box:
f Please see the chapter “COOLED GLOVE
COMPARTMENT” on page 75.
Unsecured Loads
WARNING
h
Open Glove
Compartments
WARNING
h
216 Storage, Luggage Compartment and Roof Transport System
Storage tray in the armrest between
the front seats
The armrest can be moved forward or back.
f Press the lever to the first pressure point,
move the armrest forward or back and engage
in the end position.
Information
f Only move the armrest horizontally when it is
closed.
Opening the storage tray
f Press the lever as far as the second pressure
point and open the storage tray.
Information
The storage tray can only be opened when the
armrest is in the rear position.
Other storage options
There are other storage options available,
depending on the vehicle equipment:
– Storage compartment and bottle holder in the
front and rear door panel
– Storage compartment in the center console
(instead of the ashtray)
– Map pockets
– Clothes hooks on the rear grab handles
– Cargo net on the left in the luggage
compartment
Cupholder
You can place drinks cans and cups in the
cupholder.
f Keep the rear cupholder closed while driving.
Hot drinks can cause scalding, if spilled, causing
potential loss of vehicle control.
f Only use containers that fit.
f Never put overfull containers in the cupholder.
Hot Drink Spills
WARNING
h
Storage, Luggage Compartment and Roof Transport System 217
Cupholders in the rear armrest
There are two cupholders in the armrest.
f Fold armrest down fully.
Front Ashtray/Storage
Compartment
Information
The ashtray is replaced by a storage
compartment on non-smoker vehicles.
f Never use ashtray for waste paper disposal,
as it could pose a fire hazard.
Risk of damage to the storage compartment from
hot ash.
f Do not fill with hot ash.
Opening
f Press briefly on the ashtray lid.
Emptying
f To release the ashtray insert, open the ashtray
and press the ashtray lid down.
f Pull the ashtray insert up to remove it.
f After emptying the ashtray, replace the insert
and push it down until it clicks into place.
Ashtray Fire Risk
WARNING
h
NOTICE
218 Storage, Luggage Compartment and Roof Transport System
Rear Ashtray
f Never use ashtray for waste paper disposal,
as it could pose a fire hazard.
The ashtrays are located in the rear doors.
Opening
f Press briefly on the ashtray.
Emptying
f Open the ashtray.
f Hold the insert at the lid and remove it.
Front cigarette lighter
Cigarette Lighter
The cigarette lighters are ready for use regardless
of the ignition lock position.
The tip of the cigarette lighter gets very hot when
in use.
f Do not leave children in the vehicle unattended.
f Never touch the heating element or sides of
the lighter.
f Only hold the heated lighter by the knob.
Rear cigarette lighter
Using the cigarette lighter
f Press the lighter into the receptacle. When the
element is red hot, the lighter will jump back to
its initial position.
Ashtray Fire Risk
WARNING
h
Cigarette Lighter Burns
WARNING
h

Related Topics

Loadspace Cargo Management System Luggage Compartment Cover Luggage Safety Net Ski Bag Roof Transport System Storage Cupholder Front Ashtray/Storage Compartment Rear Ashtray Cigarette Lighter

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot