Storage, Luggage Compartment and Roof Transport System 209
Removing luggage compartment cover
The luggage compartment cover is installed and
removed through the rear right door.
f First disengage the retractable covers from
the rear seat backrests and fold the backrests
forward.
Please see the chapter “FOLDING REAR SEAT
BACKRESTS FORWARD” on page 41.
1. Press the release button and slide the side
panel in direction of arrow.
2. Take the cover up out of the receiving holder
on the right side.
3. Then remove the cover on the left side.
4. Remove the cover from the vehicle through
the open door.
Installing luggage compartment cover
1. Insert the cover into the receiving holder on
the left side.
2. Insert the cover on the right side down into
the holder by pressing the release button and
sliding the side panel in direction of arrow.
3. Press the cover down until it locks securely
with an audible click.
4. Move the backrests into vertical position and
engage the retractable covers on the rear seat
backrests.
Luggage Safety Net
The luggage safety net can hold back only
lightweight objects in the event of braking,
changes in direction or in an accident.
f For information on stowing loads and luggage:
Please see the chapter “LOADING
INFORMATION” on page 221.
Unsecured loads can slip and endanger the
occupants in the event of braking, changes in
direction or in an accident.
f Always secure the passenger compartment
with the luggage safety net.
f Always fasten the load at the tie-down rings.
f Never load the vehicle higher than the top
edge of the seat backrest.
f If the luggage safety net was heavily stressed
or damaged during braking or in an accident
etc., have the safety net and its retaining
bracket checked by an authorized Porsche
dealer.
Unsecured Loads
English 
