
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Adaptive Cruise Control (ACC)
36
Vehicles with large overhangs
Fig. 10: Vehicles with large overhangs
If there is a vehicle in front with a long overhang,
such as a timber lorry, the radar sensor may not de-
tect the end of the vehicle or may detect it
incorrectly.
Responding to warning messages
Always heed any warning and information messages
displayed in the vehicle.
> Please refer to chapter "Warning and information
messages" on page 271.
Operating principle
Adaptive cruise control (ACC) operates between ap-
prox. 30 and 210 km/h (20 and 130 mph) to auto-
matically maintain a selected speed and distance
without you having to use the accelerator pedal.
If a vehicle travelling at less than the selected speed
is detected in the same lane, ACC automatically
maintains a specific distance. Adaptive cruise con-
trol applies the brakes if the distance to the vehicle
ahead becomes too short, and it accelerates if the
distance increases.
If the vehicle in front stops, ACC will slow down to a
stop; it will automatically resume driving again if the
vehicle in front starts moving again within 15 sec-
onds. Otherwise, automatic speed control and dis-
tance control can be resumed by the driver.
The speed of the vehicle can be increased at any
time by pressing the accelerator. The stored desired
speed and distance are retained and restored after
the accelerator pedal is released. The speed of the
vehicle can be reduced at any time by braking. This
will switch the system to passive operating
condition.
Controls
Fig. 11: Control stalk for driver assistance systems
R Switch systems on/off and open the options menu
S Open the options menu (when the system is switched
on)
1 Set/increase the desired speed
2 Reduce the desired speed
3 RESUME: Resume control, adopt speed
4 CANCEL: Interrupt control
Display elements
Fig. 12: ACC display
A Own speed
B Setting the desired speed
C Speed of vehicle in front
D Vehicle detected in front
E Desired distance from the vehicle in front
F Status display and desired speed
Status display symbols
Symbol Meaning
ACC is passive.
ACC is passive at the set desired
speed.