2019-2024 Porsche Taycan 2 Door Adaptive Cruise Control (ACC) -> Switch ACC on and off User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Adaptive Cruise Control (ACC) -> Switch ACC on and off for Your Porsche Taycan 2 Door First Generation (2019-2024)

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Adaptive Cruise Control (ACC)
37
Symbol Meaning
ACC is active at the set desired
speed.
A vehicle was detected ahead while
the desired speed was set. A vehicle
symbol is displayed instead of the
cruise control symbol.
Operating states
Passive
This mode is set after switching on and when ACC is
active after pressing the brake pedal and after
pressing down the control stalk (CANCEL).
– The status display F is grey.
– There is no control.
– The set desired speed and the set desired dis-
tance are retained.
Active
This mode is set after setting the speed, after re-
suming control (RESUME) and after temporarily
overriding control by pressing the accelerator pedal.
– The status display F is green.
– Speed and distance to the vehicle ahead are
controlled.
Temporarily passive
This mode is set while the accelerator pedal is
pressed when ACC is active.
– A message indicating that ACC is passive ap-
pears in the instrument cluster.
– The status display F is grey.
– There is no control.
– The set desired speed and the set desired dis-
tance are retained.
– Control is active again after releasing the accel-
erator pedal.
Switch ACC on and off
The system that was selected last is always
switched on. The system is initially in passive mode
when switched on. It must first be activated before
the control function starts working.
Switching the ACC on
bb No driver assistance system has been switched
on yet.
1. Press the R button on the control stalk.
The options menu for the driver assistance sys-
tems appears on the instrument cluster.
2. If ACC is not already selected, select ACC using
the rotary knob on the steering wheel and press
to confirm.
ACC is switched on and passive.
Switching from an already activated driver assis-
tance system to ACC
1. Press the S button on the control stalk.
The options menu for the driver assistance sys-
tems appears on the instrument cluster.
2. Select ACC using the rotary knob on the steering
wheel and press to confirm.
ACC is switched on and passive.
Information
The last selected driver assistance system is re-
tained even after switching it off and operational
readiness is restored.
Switching off ACC
e Press the R button on the control stalk.
The set desired speed is deleted.
The desired distance is stored.
Activating ACC
bb ACC switched on.
1. Accelerate or decelerate to the desired speed
using the accelerator pedal.
2. Briefly press the control stalk forward (position
1) and release the accelerator pedal.
ACC is active.
The current driving speed is set as the desired
speed.
The current desired speed is green in the status dis-
play and is automatically maintained unless a slower
vehicle is detected ahead.
Changing the desired speed
The set desired speed can be changed by pressing
the control stalk.
bb ACC is active.
Increasing the speed
e Press the control stalk forward (position 1):
– Brief press = 1 km/h (1 mph) increments
– Press and hold = 10 km/h (6 mph)
increments
Reducing the speed
e Pull the control stalk (position 2):
– Brief pull = 1 km/h (1 mph) increments
– Pull and hold = 10 km/h (6 mph) increments
The set desired speed is indicated by the outer line
at the edge of the speedometer and appears blue in
the status display F. The display turns green as soon
as the set desired speed is reached.
Changing the desired distance
The desired distance from the vehicle in front can be
set in 5 stages. Stage 3 is recommended. The

Related Topics

Popular Owner Manuals