2019-2024 Porsche Taycan 2 Door Child Restraint Systems (Child Seats) -> Installing child restraint systems User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Child Restraint Systems (Child Seats) -> Installing child restraint systems for Your Porsche Taycan 2 Door First Generation (2019-2024)

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Child Restraint Systems (Child Seats)
93
Group Passenger airbag switched on
1
Passenger airbag switched off
Group 0:
0 to 10 kg
X U / L
Group 0+:
0 to 13 kg
X U / L
Group I:
9 to 18 kg
Backward-facing
X U / L
Group I:
9 to 18 kg
Forward-facing
U / L U / L
Group II:
15 to 25 kg
U / L U / L
Group III:
22 to 36 kg
U / L U / L
Installing child restraint systems
Baby carriers
Left or right-facing child restraint systems from size
categories F and G (e.g. baby carriers) should not
generally be used on any of the seat versions.
Porsche recommends Porsche Tequipment child re-
straint systems (e.g. Porsche Babyseat ISOFIX G0+).
Switching passenger airbag on and off
DANGER
Passenger airbag
switched off
The passenger airbag will not be triggered in an ac-
cident if it is switched off.
e Only switch off the passenger airbag if a child
restraint system is fitted on the passenger seat.
e Switch the passenger airbag back on once the
child restraint system has been removed.
1. Adjust the passenger seat to the rearmost upper position.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Child Restraint Systems (Child Seats)
94
Fig. 63: Switching off the passenger airbag
bb Vehicle switched off.
1. Open the glove box.
2. Remove the emergency key from the driver's key.
> Please refer to chapter "Driver's Key" on
page 104.
NOTICE
Risk of damage to the key switch and airbag system
e Only turn the emergency key when it is inserted
fully into the key switch.
It must be possible to turn the key switch with-
out exerting excessive force.
e Only switch the passenger airbag on or off when
the vehicle is switched off.
3. Insert the emergency key as far as it will go into
the key switch.
4. Using the emergency key, switch the passenger
airbag off (switch position OFF) or on (switch
position ON).
DANGER
Risk of serious or fatal
injury due to the passen-
ger airbag triggering
inadvertently
If the emergency key is left in the key switch during
driving, it may inadvertently turn in the key switch
due to vibration, possibly triggering the airbag.
e Never leave the emergency key in the key switch
while driving.
5. Remove the emergency key from the key switch.
6. Close the glove box.
PASSENGER AIR BAG OFF/ON indicator
Fig. 64: PASSENGER AIR BAG OFF/ON indicator
The PASSENGER AIR BAG OFF/ON indicator is lo-
cated on the overhead console.
Lamp check
Once readiness for operation is established, the
PASSENGER AIR BAG OFF/ON indicator comes on
for approx. 5 seconds for a lamp check.
Passenger airbag switched off
When the passenger airbag is switched off, the
PASSENGER AIR BAG OFF indicator stays on when
readiness for operation is established.
Passenger airbag switched on
When the passenger airbag is switched on, the
PASSENGER AIR BAG ON indicator comes on for
approx. 1 minute when readiness for operation is
established and then goes off.
DANGER
Failure or malfunction of
the passenger airbag
If the PASSENGER AIR BAG OFF indicator does not
come on when readiness for operation is established
and the passenger airbag is switched off, there may
be a fault in the system.
e Do not install a child restraint system on the
passenger seat.
e Visit a qualified specialist workshop. Porsche
recommends a Porsche partner as they have
trained workshop personnel and the necessary
parts and tools.
Installing child restraint system with vehicle
seat belt
Installing child restraint system on rear seats with
vehicle seat belt
1. Adjust the backrest angle of the passenger seat
so that there is solid contact between the pas-
senger seat and child restraint system.
2. Adjust the passenger seat to the rearmost upper
position.
> Please refer to chapter "seats" on page 223.
3. If possible, adjust the seat belt guide on the
backrest of the child restraint system so that it is
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Child Restraint Systems (Child Seats)
95
in front of and underneath the belt outlet on the
B-pillar of the vehicle.
4. Make sure there is a comfortable distance be-
tween the passenger seat and the passenger
sitting behind it and if necessary, adjust the
passenger seat as required.
5. Make sure to leave a comfortable space between
the child's feet and legs and the dashboard and if
necessary, adjust the passenger seat as required.
Installing child restraint system on rear seats with
vehicle seat belt
e For booster seats with no backrest, make sure
that the booster seat is touching the rear seat
backrest.
Installing child restraint system with i-Size or
ISOFIX system
> Please refer to chapter "Using child restraint
systems of the correct weight and size class" on
page 88.
e Always refer to the separate installation instruc-
tions for your child restraint system.
Installing child restraint system on the rear seats
Fig. 65: i-Size or ISOFIX anchorage system on rear seats
(country-dependent)
The retaining lugs A of the i-Size or ISOFIX anchor-
age system for the child restraint system are located
under the marked protection caps on the seat
cushion.
1. Remove the protection caps of the i-Size or ISO-
FIX anchorage system if necessary and put them
in a safe place.
2. Secure the child restraint system to retaining
lugs A as described in the instruction manual for
the child restraint system.
3. Pull the child restraint system to check that both
anchorage points are properly engaged.
4. Ensure a comfortable distance between the front
passenger seat and a passenger sitting behind it.
To prevent it from rotating, the child restraint sys-
tem must be additionally secured with the support
leg or top tether.
Installing child restraint system with support leg
Fig. 66: Installing child restraint system with support leg
1. Install the child restraint system with ISOFIX or i-
Size anchorage correctly using the retaining lug
A.
> Please refer to chapter "Installing child re-
straint system with i-Size or ISOFIX system"
on page 95.
2. Position the support leg in accordance with the
child restraint system manufacturer's
instructions.
3. Ensure that the child restraint system is posi-
tioned flush against the rear seat.
Installing child restraint system with top tether
e When using a child restraint system with top
tether, the top tether must be attached at the
anchorage points on the back of the rear seat
backrests.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Child Restraint Systems (Child Seats)
96
Fig. 67: Anchorage points for top tether
1. Open the top tether cover.
Fig. 68: Installing child restraint system with top tether
2. Install the child restraint system with ISOFIX or i-
Size anchorage correctly with the retaining lug A.
> Please refer to chapter "Installing child re-
straint system with i-Size or ISOFIX system"
on page 95.
3. Guide the top tether B through the headrest. The
headrest can be removed for ease of installation.
> Please refer to chapter "Removing and in-
stalling headrests on rear seats" on
page 226.
Fig. 69: Securing child restraint system with i-Size or ISOFIX
top tether
4. Fasten the top tether to the anchorage point on
the rear of the backrest and tighten the top
tether.

Related Topics

Popular Owner Manuals