2019-2024 Porsche Taycan 2 Door ParkAssist User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

ParkAssist for Your Porsche Taycan 2 Door First Generation (2019-2024)

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
ParkAssist
176
ParkAssist
General Safety Instructions
WARNING
Lack of attention when
manoeuvring or parking
The increased comfort offered by ParkAssist must
not induce you to risk your safety. Even when the
system is active, the driver is still responsible for
taking due care when parking and when assessing
obstacles. The system cannot replace the driver's
attentiveness.
e Make sure that no persons, animals or obstacles
are within the manoeuvring area.
WARNING
Dirty sensors or cameras
Dirty sensors or cameras can prevent obstacles and
obstructions from being detected.
e Sensors and cameras must always be kept clean
and free of ice and snow.
System limitations
The system cannot detect the following obstacles:
– sound-absorbing obstacles (e.g. wintry condi-
tions, powder snow, clothing made from fabric,
skin or fur)
– sound-reflecting obstacles (e.g. glass surfaces,
flat painted surfaces)
– very thin obstacles (e.g. thin posts)
– obstacles above and below the sensors
Information
other ultrasound sources (e.g. pneumatic brakes of
other vehicles, sweeping machines and jack ham-
mers) can interfere with the detection of obstacles.
Responding to warning messages
Always heed any warning and information messages
displayed in the vehicle.
> Please refer to chapter "Warning and information
messages" on page 271.
Operating principle
When the driver is parking and manoeuvring the ve-
hicle, ParkAssist indicates the distance between the
vehicle and an obstacle by visual and audible means.
The visual ParkAssist parking aid is displayed in the
central display. Obstacles in front of and behind the
vehicle are displayed using differently coloured
fields. These fields show the shape of the obstacles
and their distance from the vehicle.
Distance measurement
Fig. 132: Ultrasonic sensors for distance measurement
The ultrasonic sensors (A) on the front and rear
bumper measure the distance from the closest ob-
stacle. A detected obstacle is signalled by the fol-
lowing sounds:
– Intermittent tone: An obstacle was detected.
– Decreasing intervals: Approaching the obstacle.
– Continuous tone: Distance less than approx. 30
cm.
Activating ParkAssist
Automatically
ParkAssist is activated automatically at speeds of up
to approx. 15 km/h and during readiness for opera-
tion in the following cases:
bb Reverse gear is engaged.
– or –
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
ParkAssist
177
bb Distance in front less than approx. 80 cm.
– or –
bb Rolling backwards is detected.
Manually
ParkAssist can be activated manually in the central
display:
e
e Assistance e ParkAssist
Display in the central display
Fig. 133: ParkAssist display
Colour Distance at
front
Distance at
rear
White Distance to obstacles that are
not in the path of the vehicle.
Orange < 120 cm < 180 cm
Colour Distance at
front
Distance at
rear
Red < 40 cm < 40 cm
Red with con-
tinuous tone
< 30 cm < 30 cm
Symbol Meaning
Deactivate ParkAssist for the current
parking manoeuvre. Deactvation is
cancelled if a speed of 15 km/h is
exceeded or if gear R is selected
again.
Switch off audio playback.
For information on operating the central display:
> Please refer to chapter "Porsche Communication
Management (PCM)" on page 190.
Deactivating ParkAssist
e Press the P button.
Adjusting the ParkAssist volume
e
e Assistance e e Assistance system
settings e ParkAssist
Switching off automatic activa-
tion of ParkAssist
The automatic activation of ParkAssist can be
switched off when approaching an obstacle.
e
e Assistance e e Assistance system
settings e ParkAssist
reversing camera
WARNING
Risk of injury due to dis-
torted representation
The objects shown by the camera appear distorted.
The reversing camera image does not show the
complete area behind the vehicle.
e Always pay attention to the entire vehicle
surroundings.
e Make sure that no persons, animals or obstacles
are within the manoeuvring area.
The reversing camera facilitates monitoring of the
area behind the vehicle during parking manoeuvres.
The reversing camera image is displayed on the
central display.
Activating the reversing camera
Automatically
The reversing camera is activated automatically in
the following cases when operational readiness is
established.
bb Reverse gear is engaged.
– or –
bb Rolling backwards is detected.
Manually
The reversing camera can be activated or deacti-
vated manually in the central display:
e
e Assistance e ParkAssist
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
ParkAssist
178
Information
In addition to the camera image, guide lines are
superimposed on the rear camera view as well.
These guide lines indicate the direction the vehicle
can follow with the steering wheel in the current
position. The guide lines change as the position of
the front wheels changes.
Deactivating reversing camera
Automatically
bb Speed is higher than 15 km/h.
Manually
e Press the P button.
Cleaning the reversing camera
e Press the
button on the vehicle rear once
briefly on the camera display.
Information
e If windscreen is very dirty, repeat wash.
e Persistent dirt (e.g. insect remains) should be
removed regularly.
Surround View
WARNING
Risk of injury due to dis-
torted display
The objects detected by the camera appear dis-
torted. Many of the screen windows do not show the
entire area around the vehicle.
e Always pay attention to the entire vehicle
surroundings.
e Make sure that no persons, animals or obstacles
are within the manoeuvring area.
Fig. 134: Position of Surround View cameras
A Camera in the centre of the front bumper
B Camera in both exterior mirrors
C Camera between the number plate lights in the tailgate
Surround View provides a bird's eye view of the ve-
hicle and covers the area around the vehicle. Using
the cameras, obstacles or markings are detected,
along with the exact position of the vehicle. When
Surround View is active, the courtesy lighting is
switched on for better illumination.
Activating Surround View
Automatically
bb ParkAssist is active.
– or –
bb Reverse gear is engaged.
– or –
bb Rolling backwards is detected.
Manually
1.
e Assistance e ParkAssist
2. Select the desired view.
The symbol for the active view is highlighted in blue.
Symbol Meaning
Parking
Switch view by touching the front or
rear camera symbol.
Panorama
Switch the view by touching the front
or rear camera symbol.
3D view
– Switch the perspective by touch-
ing one of the side camera
symbols.
– Select the all-round view by
touching the camera symbol at
the bottom of the screen and by
turning the perspective 360° by
swiping the camera image.
Clean the reversing camera.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
ParkAssist
179
Information
In addition to the camera image, guide lines are
superimposed on the front and rear camera views.
These guide lines indicate the direction the vehicle
can follow with the steering wheel in the current
position. The guide lines change as the position of
the front wheels changes.
Deactivating Surround View
Automatically
bb Speed is higher than 15 km/h (9 mph).
Manually
e Press the P button.

Related Topics

Popular Owner Manuals