
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
ParkAssist
176
ParkAssist
General Safety Instructions
WARNING
Lack of attention when
manoeuvring or parking
The increased comfort offered by ParkAssist must
not induce you to risk your safety. Even when the
system is active, the driver is still responsible for
taking due care when parking and when assessing
obstacles. The system cannot replace the driver's
attentiveness.
e Make sure that no persons, animals or obstacles
are within the manoeuvring area.
WARNING
Dirty sensors or cameras
Dirty sensors or cameras can prevent obstacles and
obstructions from being detected.
e Sensors and cameras must always be kept clean
and free of ice and snow.
System limitations
The system cannot detect the following obstacles:
– sound-absorbing obstacles (e.g. wintry condi-
tions, powder snow, clothing made from fabric,
skin or fur)
– sound-reflecting obstacles (e.g. glass surfaces,
flat painted surfaces)
– very thin obstacles (e.g. thin posts)
– obstacles above and below the sensors
Information
other ultrasound sources (e.g. pneumatic brakes of
other vehicles, sweeping machines and jack ham-
mers) can interfere with the detection of obstacles.
Responding to warning messages
Always heed any warning and information messages
displayed in the vehicle.
> Please refer to chapter "Warning and information
messages" on page 271.
Operating principle
When the driver is parking and manoeuvring the ve-
hicle, ParkAssist indicates the distance between the
vehicle and an obstacle by visual and audible means.
The visual ParkAssist parking aid is displayed in the
central display. Obstacles in front of and behind the
vehicle are displayed using differently coloured
fields. These fields show the shape of the obstacles
and their distance from the vehicle.
Distance measurement
Fig. 132: Ultrasonic sensors for distance measurement
The ultrasonic sensors (A) on the front and rear
bumper measure the distance from the closest ob-
stacle. A detected obstacle is signalled by the fol-
lowing sounds:
– Intermittent tone: An obstacle was detected.
– Decreasing intervals: Approaching the obstacle.
– Continuous tone: Distance less than approx. 30
cm.
Activating ParkAssist
Automatically
ParkAssist is activated automatically at speeds of up
to approx. 15 km/h and during readiness for opera-
tion in the following cases:
bb Reverse gear is engaged.
– or –