2025-2026 Porsche Taycan 2 Door Charging high-voltage battery User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Charging high-voltage battery for Your Porsche Taycan 2 Door Second Generation (2025-2026)

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Charging high-voltage battery
79
Charging high-voltage
battery
Charging the high-voltage battery
DANGER
Incorrect charging
An incorrect charging process, non-observance of
the generally applicable safety precautions and im-
proper handling of the high-voltage battery can
cause electric shocks, short circuits, explosions, fire
or burns.
e Before starting the vehicle, remove the vehicle
charging cable, close the cover and charge port
door and store the vehicle charging cable in a
safe place.
e Always observe the specified sequence when
charging the high-voltage battery. Do not unplug
the vehicle charging cable from the electrical
socket during the charging process. Finish
charging before disconnecting the vehicle
charging cable from the electrical socket.
e Observe the safety notes in the instructions for
the Porsche charging equipment.
e Do not work in or on the vehicle during the
charging process.
e Never charge the vehicle at both charge ports at
the same time.
DANGER
Unsuitable or damaged
electrical sockets and
vehicle charging cables
The use of unsuitable or damaged electrical sockets
and vehicle charging cables and improper handling
of the high-voltage battery can cause electric
shocks, short circuits, explosions, fire or burns.
e Only use vehicle charging cables that have been
tested and approved by the manufacturer for
charging the high-voltage battery in an electric
vehicle.
e Always have the charging equipment with you
that is required for the country you are driving in.
e Only connect vehicle charging cables to electri-
cal sockets that were installed professionally.
e Do not connect vehicle charging cables to dam-
aged or dirty electrical sockets.
e Do not use a damaged vehicle charging cable.
e Do not use extension cables, cable reels, multiple
sockets or travel adapters.
e Do not modify or repair any of the electrical
components.
e Protect electrical sockets and plug connections
from water, moisture and other fluids and liquids.
e Do not use sharp-edged or pointed objects to
remove dirt, ice and snow from the charging
socket.
e Never insert objects into the charge port on the
vehicle.
WARNING
Unsecured vehicle
charging cable
An unsecured, incorrectly secured or incorrectly
positioned vehicle charging cable can slip out of
place and endanger the vehicle occupants during
braking, changes of direction or in the event of an
accident.
e Never transport the vehicle charging cable in the
passenger compartment (such as on or in front
of the seats) or unsecured.
e Always store the vehicle charging cable in the
charge bag in the luggage compartment or in the
storage compartment provided for transporting
it in the luggage compartment.
NOTICE
Risk of damage to the charging equipment and ve-
hicle from overvoltages in the power supply.
e Do not charge the high-voltage battery via the
vehicle charge port during a thunderstorm.
e If possible, disconnect charging equipment from
the mains power supply during a thunderstorm.
Care instructions for the high-voltage battery
Please refer to chapter "Car Care" on page 63.
Instructions for charging the high-voltage
battery
e Ensure that the temperature of the vehicle is
between approx. –20 °C and +30 °C during the
charging process.
e If possible, begin charging the high-voltage bat-
tery using the Charging Planner and use the
Timer or Profile function to charge the battery
with alternating current (AC).
e Use the Timer or Profile function to program a
maximum high-voltage battery charge of 85%
for daily use of the vehicle without any long-dis-
tance driving.
e If required, a battery charge of 100% can be
programmed before starting long journeys.
e At ambient temperatures of over 30 °C, connect
the vehicle to the mains and charge the high-
voltage battery with alternating current (AC).
Use the Timer or Profile function.
e At ambient temperatures of over 35 °C, avoid
using "Range" drive mode immediately after
charging with in excess of 150 kW direct current
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Charging high-voltage battery
80
(DC) in order to maximise cooling of the high-
voltage battery.
Instructions for the charging equipment
e More information about the charger and about
the web application is found under "E-Perform-
ance" at the following web address:
e Only use vehicle charging cables that have been
tested and approved for charging the high-volt-
age battery in an electric vehicle (the charging
plug standardised in accordance with IEC
62196-2, SAE J1772 or GB/T 20234-2 and the
charging process in accordance with IEC
61851-1, SAE J1772 or GB/T 18487 (modes 2
and 3)), and comply with national standards and
legislation.
Vehicle charging cables without protection
(standardised in accordance with IEC 61851-1,
SAE J1772 or GB/T 18487 (mode 1)) are not
supported.
e Only use charging cables with a maximum length
of 30 m.
e Porsche recommends that you use charging
equipment supplied and approved by Porsche
together with the charging dock or the basic wall
mount. Refer to the separate instructions for the
Porsche charging equipment and the vehicle
charging cable used.
Fig. 49: Charging the high-voltage battery
Charging with alternating current (AC) at do-
mestic and industrial electrical outlets or at
public E-charging stations
The high-voltage battery in the vehicle can be
charged with alternating current (AC) via the charge
port on the driver's side (LHD: 4, RHD: 3). Depending
on the country and equipment, there is another AC
charge port on the passenger's side (LHD: 3, RHD:
4). Both charge ports have the same charging power.
When you are using one charge port, the other
charge port is disabled.
To reduce the charging time, Porsche recommends
charging at industrial electrical outlets, at E-charg-
ing stations 2 or at the wall box 1. Only charge the
high-voltage battery at domestic electrical outlets 1
if no other charging option is available.
Rapid charging with direct current (DC) at
public E-charging stations
The high-voltage battery in the vehicle can be
charged with direct current (DC) 5 at a charging
station via the charge port on the passenger's side
(LHD: 3, RHD: 4). This shortens the charging time
significantly.
Porsche recommends charging with direct current
(DC) if you want to charge the high-voltage battery
in the shortest possible time. The shortest charging
times are achieved using the Charging Planner.
Opening and closing the charge
port door
NOTICE
Risk of damage to the charge port door from foreign
objects and ice.
e Check the charge port door for possible foreign
objects and ice before opening and closing it.
e If the charge port door is damaged, visit a quali-
fied specialist workshop. Porsche recommends a
Porsche partner as they have trained workshop
personnel and the necessary parts and tools.
> Please refer to chapter "Car Care" on page 63.
The vehicle has either a manual or electric charge
port door, depending on the equipment.
Opening and closing the manual charge port
door
bb Vehicle with a manual charge port door.
bb Vehicle unlocked or driver's key near the charge
port door (depending on the equipment).
bb Parking lock and parking brake activated.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Charging high-voltage battery
81
Fig. 50: Opening and closing the manual charge port door on
the outside of the vehicle
1. Press on the rear part of the charge port door to
open it.
Charge port door opens.
2. Press on the rear part of the charge port door
until it engages securely to close it.
Opening and closing the electric charge port
door
If the electric charge port door is open, it will close
automatically after 120 seconds, 10 seconds after
removing the vehicle plug or immediately after lock-
ing the vehicle.
bb Vehicle with an electric charge port door.
bb Vehicle unlocked or driver's key near the charge
port door (depending on the equipment).
bb Parking lock and parking brake activated.
Opening and closing the electric charge port door
on the outside of the vehicle
Fig. 51: Opening the charge port door
e Move your hand along the underside of the fin to
open it.
Charge port door opens.
e Move your hand along the underside of the fin to
close it.
Charge port door closes.
Opening and closing the electric charge port door
using the centre console control panel
1. Touch
e .
2. Select the desired charge port door.
Charge port door opens or closes.
Inserting the vehicle plug into the
vehicle charge port and starting
the charging process
bb Parking lock and parking brake activated.
bb Charge port door open.
bb Vehicle charging cable connected to the mains
power supply.
1. Refer to the separate instructions for the Por-
sche charging equipment and instructions of the
vehicle charging cable used.
Fig. 52: Vehicle plug inserted
2. Insert vehicle plug A fully into the charge port
until it clicks audibly into place. For heavy vehicle
plugs, you may need to lift the vehicle plug
slightly to ensure that it locks.
The vehicle plug is locked and the charging
process is started. Release button ring B indi-
cates whether the vehicle plug is locked and also
shows the charge level of the high-voltage
battery.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Charging high-voltage battery
82
> Please refer to chapter "Display of the charge
and locking status on the vehicle charge port" on
page 82.
Information
– If the vehicle plug is inserted when the vehicle is
started, the vehicle plug remains locked.
– If gear D is selected during charging, the charg-
ing process is interrupted. The charging process
is resumed after approx. 20 seconds if the ve-
hicle plug is not removed.
– If the charge timer or profile function is activated
while charging using alternating current (AC), the
charge timer or profile function controls when
the charging process starts and this may not
start immediately after you insert and lock the
vehicle plug.
Finishing the charging process
and removing the vehicle plug
from the vehicle charge port
1. Unlock the vehicle.
2. Press release button B on the vehicle charge
port.
The vehicle plug is unlocked. If a charging proc-
ess was started, it will be stopped.
3. Pull vehicle plug A from the vehicle charge port
within approx. 20 Sekunden.
4. Disconnect the vehicle charging cable from the
power supply and store it in a safe place.
5. Close the charge port door.
Information
– Observe the specified sequence for charging the
high-voltage battery.
– End the charging process before disconnecting
the vehicle cable from the electrical socket.
– Observe the safety instructions for charging the
high-voltage battery.
Display of the charge and locking
status on the vehicle charge port
The release button ring indicates whether the ve-
hicle plug is locked and also shows the charge level
of the high-voltage battery.
B Meaning
Off The vehicle plug is not inserted or no
connection to the mains supply is
established.
or
Vehicle plug inserted: Vehicle in idle
state. To detect the current con-
nection status and battery charge
level, press the
or button on
the driver's key.
lights
up
Vehicle plug inserted and locked.
pulsates
Vehicle plug inserted and locked.
Communications setup and
dismantling
B Meaning
pulsates
Vehicle plug inserted and locked.
The high-voltage battery is being
charged.
lights
up
Vehicle plug inserted and locked.
Charging process completed and
target battery charge level reached.
flashes
Vehicle plug inserted and locked.
Charging paused due to pro-
grammed timer and profile settings.
lights
up
An error occurred while charging the
high-voltage battery.
If the charging process was not started:
e Check that the vehicle plug is inserted correctly.
e Refer to the separate instructions for the Por-
sche charging equipment and the instructions
for the vehicle charging cable used and the in-
structions on the charging station.
e Remove and insert the vehicle plug again.
– or –
1. Turn the vehicle off and get out.
2. Remove the vehicle plug from the vehicle charge
port.
3. Close the doors, windows and charge port door,
lock the vehicle and leave the keyless comfort
access response area.
4. Wait approximately 5 minutes. Do not use the
app to access the vehicle during this time.
5. Insert the vehicle plug into the vehicle charge
port and start the charging process again.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Charging high-voltage battery
83
Using the Immediate Charge
function
bb Vehicle plug inserted.
Central display
1.
e Charging e Overview
2. Activate Charge Immediately.
The high-voltage battery is being charged.
Centre console control panel
1. Touch the
softkey.
2. Touch the Charge Immediately softkey.
The high-voltage battery is being charged.
Using the charging functions in
the central display.
The charging functions Timer and Profile can be
used to programme various parameters for the
charging process on the central display. Both func-
tions are only available when charging with alternat-
ing current (AC).
Use the Timer or Profile function to programme a
maximum high-voltage battery charge of 85% for
daily use of the vehicle. The high-voltage battery is
always charged to the minimum charge level pro-
grammed in the Profile function, even if a charge
timer is active.
More information on the charger and the web appli-
cation is available under "EPerformance" at the fol-
lowing web address: .
Using the charge level display
Fig. 53: Charge level display
The battery charge condition display indicates the
current charge level of the high-voltage battery in
the central display and the centre console control
panel.
Programming and activating the timer
bb Departure time in the future.
The Timer function ensures that the high-voltage
battery is charged to a specified charge level at a
programmed departure time. The passenger com-
partment can be also precooled/heated by the de-
parture time by selecting the Precool/heat option.
> Please refer to chapter "Air Conditioning System
Advanced Climate Control (2-/4-Zone Climate
Control)" on page 42.
At some public charging stations, the charging
process cannot be started if a departure timer has
been programmed.
1.
e Load eTimer
2. Editing the Timer
.
3. Programme the date and departure time. If you
use the selected timer regularly, activate Re-
peat and select weekdays.
4. Programming the target charge.
5. Activate charging.
6. Activate parking pre-climatisation if required.
7. Activating thetimer.
Deactivating the timer
1.
e Charging e timer
2. Deactivating the timer.
Starting charging using the timer
bb Timer programmed and activated.
bb Vehicle plug inserted.
The timer function defines the charging process,
which then starts automatically. The high-voltage
battery will be charged before the programmed de-
parture time.
The high-voltage battery may not be fully charged if
parking pre-climatisation is programmed.
Ending charging with the timer
bb Vehicle plug inserted.
bb Timer function activated.
e Press the release button.
High-voltage battery charging stops.
e If charging is ongoing, wait until the ring has
disappeared from the release button.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Charging high-voltage battery
84
Programming and activating the charging
profile
bb Departure time in the future.
The Profile function ensures that the high-voltage
battery is charged to a programmed minimum
charge level at a specified departure time, such as to
use specific energy rates.
Programming and activating the general charging
profile
The high-voltage battery is charged automatically to
the programmed charge level during the specified
charging times when the vehicle is charged using
alternating current (AC) and provided that no timer
or location-dependent charging profile is active.
1.
e Charging e Profile
2. Editing the general charging profile
.
3. Programming the minimum charge level.
4. Activating optimised charging.
– or –
Setting and activating your preferred charging
times and programming preferred charging
times.
5. Activating the general charging profile.
Programming and activating the location-depend-
ent charging profile
1.
e Charging e Profile
2. Select Add new profile.
– or –
Edit existing profile
.
3. Programme thename and select the location.
4. Programming the minimum charge level.
5. Activate optimised charging.
– or –
Setting and activating your preferred charging
times and programming preferred charging
times.
6. Activate thecharging profile.
Deactivate the profile
1.
e Charging e Profile
2. Deactivate theprofile.
Starting charging using the profile
bb Profile programmed and activated.
bb Vehicle plug inserted.
The profile function defines the charging process,
which then starts automatically. The high-voltage
battery will be charged to the specified charge level
within the programmed charging time.
The high-voltage battery may not be fully charged
depending on the minimum charge level
programmed.
Stopping charging using the profile
bb Vehicle plug inserted.
bb Profile function activated.
e Press the release button.
High-voltage battery charging stops.
e If charging is ongoing, wait until the ring has
disappeared from the release button.
Charging times
Charging powers and times depend on various fac-
tors, which may increase charging times consider-
ably compared to the values indicated:
– Customer-specific installation, e.g. socket used.
– Power output of the country-specific energy
infrastructure.
– Settings for charging current limiting on the
control unit.
– Fluctuations in the mains voltage.
– Ambient temperature of the vehicle and the
charging equipment.
– Temperature of the high-voltage battery and
control unit.
– Charge level of the high-voltage battery.
– Age of the high-voltage battery and number of
charges completed.
– Passenger compartment temperature precool-
ing/heating activated.
– Current-carrying capacity of the vehicle plug.
The amount of energy taken from the mains power
supply is greater than the amount of energy stored
during charging of the high-voltage battery. The
reasons for this include physical charging losses and
the use of energy to control the temperature of the
high-voltage battery.
For physical and chemical reasons, the charging
speed decreases as the charge level approaches
100%.
The predominant use of fast charging columns (DC)
causes charging times to increase in the long term.
e A maximum charging power of 50 kW should be
selected for regular charging with direct current
(DC).
e Charging with alternating current (AC) is recom-
mended at home. Using an industrial electrical
outlet (AC) will allow you to achieve higher
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Charging high-voltage battery
85
efficiency and a significantly lower charging du-
ration than charging using a household socket.
Performing an emergency release
of the charge port door
If the charging tray is faulty, the charge port door
can be opened manually.
e Never perform an emergency release of the
charge port doors on both sides at the same time
or when one charge port door has already been
opened correctly.
Performing an emergency release of the
manual charge port door
After an emergency release of the manual charge
port door, the vehicle can be charged via this charge
port door using alternating current (AC) or direct
current (DC). The charge port door located opposite
is locked automatically.
Fig. 54: Emergency release of the manual charge port door
1. Remove the emergency release tool from the tool
kit.
2. Guide the metal hook of the emergency release
tool under the rear section of the charge port
door.
3. Position the emergency release tool and pull to
open.
4. Insert the metal hook of the emergency release
tool into the tappet opening and turn the emer-
gency release tool approx. 45 degrees towards
the front of the vehicle, applying slight pressure.
5. Removing the tappet.
6. Carry out charging.
7. Close the charge port door after charging.
To have the unlocking mechanism of the charge port
door checked:
e Visit a qualified specialist workshop. Porsche
recommends a Porsche partner as they have
trained workshop personnel and the necessary
parts and tools.
Performing an emergency release of the
electric charge port door
After an emergency release, the vehicle can only be
charged using alternating current (AC).
Fig. 55: Emergency release of the electric charge port door
1. Remove the emergency release tool from the tool
kit.
2. Guide the metal hook of the emergency release
tool behind the charge port door cover.
3. Position the emergency release tool and pull to
loosen the charge port door from its anchor.
4. Carry out charging.
5. Place the charge port door cover on the anchor
and push until it engages securely to close it.
To have the unlocking mechanism of the charge port
door checked:
e Visit a qualified specialist workshop. Porsche
recommends a Porsche partner as they have
trained workshop personnel and the necessary
parts and tools.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Charging high-voltage battery
86
Performing an emergency release
of the vehicle plug
If the vehicle plug cannot be released (e.g. due to a
malfunction), an emergency release must be carried
out.
The availability of the vehicle plug emergency re-
lease depends on the country.
Fig. 56: Performing an emergency release of the vehicle plug
1. Open the driver or passenger door.
2. Reach into the space between the driver or pas-
senger door and wing. Pull the knob up to the
point of resistance.
The vehicle plug is unlocked. If a charging proc-
ess was started, it will be stopped.
3. Pull the vehicle plug from the vehicle charge port
within approx. 20 seconds.
4. Close the charge port door. Visit a workshop.

Related Topics

Charging the high-voltage battery Opening and closing the charge port door Inserting the vehicle plug into the vehicle charge port and starting the charging process Finishing the charging process and removing the vehicle plug from the vehicle charge port Using the charging functions in the central display. Charging times Performing an emergency release of the charge port door Performing an emergency release of the vehicle plug

Popular Owner Manuals