2025-2026 Porsche Taycan 2 Door Charging high-voltage battery -> Charging the high-voltage battery User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Charging high-voltage battery -> Charging the high-voltage battery for Your Porsche Taycan 2 Door Second Generation (2025-2026)

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Charging high-voltage battery
79
Charging high-voltage
battery
Charging the high-voltage battery
DANGER
Incorrect charging
An incorrect charging process, non-observance of
the generally applicable safety precautions and im-
proper handling of the high-voltage battery can
cause electric shocks, short circuits, explosions, fire
or burns.
e Before starting the vehicle, remove the vehicle
charging cable, close the cover and charge port
door and store the vehicle charging cable in a
safe place.
e Always observe the specified sequence when
charging the high-voltage battery. Do not unplug
the vehicle charging cable from the electrical
socket during the charging process. Finish
charging before disconnecting the vehicle
charging cable from the electrical socket.
e Observe the safety notes in the instructions for
the Porsche charging equipment.
e Do not work in or on the vehicle during the
charging process.
e Never charge the vehicle at both charge ports at
the same time.
DANGER
Unsuitable or damaged
electrical sockets and
vehicle charging cables
The use of unsuitable or damaged electrical sockets
and vehicle charging cables and improper handling
of the high-voltage battery can cause electric
shocks, short circuits, explosions, fire or burns.
e Only use vehicle charging cables that have been
tested and approved by the manufacturer for
charging the high-voltage battery in an electric
vehicle.
e Always have the charging equipment with you
that is required for the country you are driving in.
e Only connect vehicle charging cables to electri-
cal sockets that were installed professionally.
e Do not connect vehicle charging cables to dam-
aged or dirty electrical sockets.
e Do not use a damaged vehicle charging cable.
e Do not use extension cables, cable reels, multiple
sockets or travel adapters.
e Do not modify or repair any of the electrical
components.
e Protect electrical sockets and plug connections
from water, moisture and other fluids and liquids.
e Do not use sharp-edged or pointed objects to
remove dirt, ice and snow from the charging
socket.
e Never insert objects into the charge port on the
vehicle.
WARNING
Unsecured vehicle
charging cable
An unsecured, incorrectly secured or incorrectly
positioned vehicle charging cable can slip out of
place and endanger the vehicle occupants during
braking, changes of direction or in the event of an
accident.
e Never transport the vehicle charging cable in the
passenger compartment (such as on or in front
of the seats) or unsecured.
e Always store the vehicle charging cable in the
charge bag in the luggage compartment or in the
storage compartment provided for transporting
it in the luggage compartment.
NOTICE
Risk of damage to the charging equipment and ve-
hicle from overvoltages in the power supply.
e Do not charge the high-voltage battery via the
vehicle charge port during a thunderstorm.
e If possible, disconnect charging equipment from
the mains power supply during a thunderstorm.
Care instructions for the high-voltage battery
Please refer to chapter "Car Care" on page 63.
Instructions for charging the high-voltage
battery
e Ensure that the temperature of the vehicle is
between approx. –20 °C and +30 °C during the
charging process.
e If possible, begin charging the high-voltage bat-
tery using the Charging Planner and use the
Timer or Profile function to charge the battery
with alternating current (AC).
e Use the Timer or Profile function to program a
maximum high-voltage battery charge of 85%
for daily use of the vehicle without any long-dis-
tance driving.
e If required, a battery charge of 100% can be
programmed before starting long journeys.
e At ambient temperatures of over 30 °C, connect
the vehicle to the mains and charge the high-
voltage battery with alternating current (AC).
Use the Timer or Profile function.
e At ambient temperatures of over 35 °C, avoid
using "Range" drive mode immediately after
charging with in excess of 150 kW direct current
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Charging high-voltage battery
80
(DC) in order to maximise cooling of the high-
voltage battery.
Instructions for the charging equipment
e More information about the charger and about
the web application is found under "E-Perform-
ance" at the following web address:
e Only use vehicle charging cables that have been
tested and approved for charging the high-volt-
age battery in an electric vehicle (the charging
plug standardised in accordance with IEC
62196-2, SAE J1772 or GB/T 20234-2 and the
charging process in accordance with IEC
61851-1, SAE J1772 or GB/T 18487 (modes 2
and 3)), and comply with national standards and
legislation.
Vehicle charging cables without protection
(standardised in accordance with IEC 61851-1,
SAE J1772 or GB/T 18487 (mode 1)) are not
supported.
e Only use charging cables with a maximum length
of 30 m.
e Porsche recommends that you use charging
equipment supplied and approved by Porsche
together with the charging dock or the basic wall
mount. Refer to the separate instructions for the
Porsche charging equipment and the vehicle
charging cable used.
Fig. 49: Charging the high-voltage battery
Charging with alternating current (AC) at do-
mestic and industrial electrical outlets or at
public E-charging stations
The high-voltage battery in the vehicle can be
charged with alternating current (AC) via the charge
port on the driver's side (LHD: 4, RHD: 3). Depending
on the country and equipment, there is another AC
charge port on the passenger's side (LHD: 3, RHD:
4). Both charge ports have the same charging power.
When you are using one charge port, the other
charge port is disabled.
To reduce the charging time, Porsche recommends
charging at industrial electrical outlets, at E-charg-
ing stations 2 or at the wall box 1. Only charge the
high-voltage battery at domestic electrical outlets 1
if no other charging option is available.
Rapid charging with direct current (DC) at
public E-charging stations
The high-voltage battery in the vehicle can be
charged with direct current (DC) 5 at a charging
station via the charge port on the passenger's side
(LHD: 3, RHD: 4). This shortens the charging time
significantly.
Porsche recommends charging with direct current
(DC) if you want to charge the high-voltage battery
in the shortest possible time. The shortest charging
times are achieved using the Charging Planner.
Opening and closing the charge
port door
NOTICE
Risk of damage to the charge port door from foreign
objects and ice.
e Check the charge port door for possible foreign
objects and ice before opening and closing it.
e If the charge port door is damaged, visit a quali-
fied specialist workshop. Porsche recommends a
Porsche partner as they have trained workshop
personnel and the necessary parts and tools.
> Please refer to chapter "Car Care" on page 63.
The vehicle has either a manual or electric charge
port door, depending on the equipment.
Opening and closing the manual charge port
door
bb Vehicle with a manual charge port door.
bb Vehicle unlocked or driver's key near the charge
port door (depending on the equipment).
bb Parking lock and parking brake activated.

Related Topics

Opening and closing the charge port door Inserting the vehicle plug into the vehicle charge port and starting the charging process Finishing the charging process and removing the vehicle plug from the vehicle charge port Using the charging functions in the central display. Charging times Performing an emergency release of the charge port door Performing an emergency release of the vehicle plug

Popular Owner Manuals