2019-2026 Renault Captur SUV Maintenance -> Bodywork maintenance User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance -> Bodywork maintenance for Your Renault Captur SUV Second Generation (2019-2026)

BODYWORK MAINTENANCE (1/3)  
A well-maintained vehicle will last  
longer.  
Respect local regulations about wash-  
ing vehicles (e.g. do not wash your ve-  
hicle on a public highway).  
You should  
Wash your car frequently, with the  
engine off, with cleaning products rec-  
ommended by the manufacturer (never  
use abrasive products).  
It is therefore recommended to main-  
tain the exterior of the vehicle regularly.  
Observe the vehicle stopping distances  
when driving on gravelled surfaces to  
prevent paint damage.  
Your vehicle has been treated with very  
effective anti-corrosion products. It is  
nevertheless subject to various outside  
influences.  
Rinse thoroughly beforehand with a jet:  
Repair, or have repaired quickly, areas  
where the paint has been damaged, to  
prevent corrosion spreading.  
– spots of tree resin and industrial  
grime;  
– mud in the wheel arches and under-  
neath the body which forms damp  
patches;  
bird droppings, which cause a  
chemical reaction with the paint that  
rapidly discolours paintwork and  
may even cause the paint to peel  
off;  
Corrosive agents in the atmosphere  
Remember to visit the body shop pe-  
riodically in order to maintain your an-  
ti-corrosion warranty.  
– Atmospheric pollution (in built-up  
and industrial areas);  
– saline atmospheres (near the sea,  
particularly in hot weather);  
– seasonal and damp weather condi-  
tions (e.g. road salt in winter, water  
from road cleaners, etc.).  
Refer to the maintenance document.  
If mechanical components, hinges, etc.  
have been cleaned, they must be pro-  
tected again by spraying with products  
approved by our Technical Department.  
wash the vehicle immediately to  
remove these marks since it is im-  
possible to remove them by polish-  
ing;  
Minor impacts  
Abrasive action  
– salt, particularly in the wheel arches  
and underneath the body after driv-  
ing in areas where the roads have  
been gritted.  
Dust and sand in the air, mud, road grit  
thrown up by other vehicles, etc.  
You should take a number of minor pre-  
cautions in order to safeguard your ve-  
hicle against such risks.  
Remove any plant matter (resin, leaves,  
etc.) from the vehicle regularly.  
We have selected special products  
to care for your vehicle and you can  
obtain these from the manufactur-  
er’s accessory outlets.  
4.16  
BODYWORK MAINTENANCE (2/3)  
What you should not do  
Wash the vehicle in bright sunlight or  
freezing temperatures.  
Vehicles with a matte paint  
finish  
This type of paint requires certain pre-  
cautions.  
Degrease or clean using  
high-pressure cleaning  
equipment or by spray-  
ing on products not ap-  
proved by our Technical  
Department:  
Do not scrape off mud or dirt without  
pre-wetting.  
You should do the following  
Allow dirt to accumulate on the exterior.  
Wash the vehicle by hand using plenty  
of water, using a soft cloth or a gentle  
sponge.  
Allow rust to form following minor im-  
pacts.  
– mechanical components (e.g.:  
engine compartment);  
Do not use solvents not approved by  
our Technical Department to remove  
stains as this could damage the paint-  
work.  
– the wheels (e.g. braking system  
components such as brake calli-  
pers);  
Do not do the following  
Use wax-based products (polishing).  
Rub too hard.  
– underbody;  
Do not drive in snow or muddy condi-  
tions without washing the vehicle, par-  
ticularly under the wheel arches and  
body.  
Wash the vehicle in a roller-type car  
wash.  
– parts with hinges (e.g.: inside the  
doors);  
Attach stickers to the paintwork (risk of  
leaving marks).  
– painted plastic external fittings (e.g.:  
bumpers).  
Doing this could give rise to corrosion  
or operational faults.  
Wash the vehicle  
using a high-pressure  
cleaning device.  
4.17  
BODYWORK MAINTENANCE (3/3)  
Using a roller type car wash  
Return the wiper stalk to the park posi-  
Cleaning the headlights,  
sensors and cameras  
Cleaning stickers, decorative  
films, etc.  
tion 1.101.  
Use a soft cloth or cotton wool.  
You should do the following  
Check the mounting of external ac-  
cessories, additional lights and rear  
view mirrors, and ensure that the wiper  
blades are secured with adhesive tape.  
If this does not clean them properly,  
moisten the cloth with soapy water,  
then wipe clean with a soft damp cloth  
or cotton wool.  
Use a soft cloth or cotton wool.  
Moisten it slightly with soapy water then  
always wipe clean with a soft cloth or  
cotton wool.  
Remove the radio aerial mast if your  
vehicle is fitted with this equipment.  
Finally, carefully dry off with a soft dry  
cloth.  
Finally, carefully dry off with a soft dry  
cloth.  
Check that the fuel filler flap is closed  
then lock the vehicle.  
Do not use cleaning products con-  
taining alcohol or utensils (e.g.: a  
scraper).  
Do not do the following  
Use alcohol-based cleaning products.  
Use utensils (e.g.: scraper).  
Rub too hard.  
Remember to remove the tape and refit  
the antenna after washing.  
Wash the area using a  
high-pressure clean-  
ing device.  
4.18  

Related Topics

Popular Owner Manuals