BONNET (2/2)
6
5
Ensure that the bonnet is
properly locked.
Check that nothing is pre-
venting the catch from lock-
ing (gravel, cloth, etc.).
Closing the bonnet
Before closing the bonnet, make sure
that nothing has been left in the engine
compartment.
After any procedure in the
engine compartment, make
sure that you do not forget
anything (cloth, tools, etc.).
These may damage the engine or
cause a fire.
To close the bonnet, replace the stay 5
in its holder 6. Hold the middle of the
bonnet and guide it down to one foot
(30 cm) above the closed position, then
release. It will latch automatically under
its own weight.
In the event of even a slight
impact involving the radi-
ator grille or bonnet, have
the bonnet lock checked by
an approved dealer as soon as pos-
sible.
4.3
English 
