MANUAL AIR CONDITIONING, HEATING SYSTEM (3/6)
Air recirculation (isolation of
Switching air conditioning on
Stopping the system
the passenger compartment)
or off
Turn the 3 control to “OFF” or “0” to
switch off the system or press the 4
Air recirculation is for:
In automatic mode, the system switches
button. To start it, turn the 3 control to
the air conditioning system on or off,
– isolating the vehicle from the exter-
adjust the fan speed.
depending on the climate conditions.
nal atmosphere (driving in polluted
areas, etc.);
Activation is not possible if the 3 control
Clear View function
is set to “0” (control A) or “OFF” (con-
– to cool the passenger compartment
trol B).
Press the 7 button: the integrated indi-
temperature more quickly when air
cator light comes on.
conditioning is activated.
Press the 6 button to deactivate the air
conditioning. The button’s warning light
This function quickly demists and de-
This function is managed automatically
will go out.
ices the windscreen, the rear screen,
but you can also activate it manually. In
the front side windows, and the door
this case, the operation is confirmed by
The air conditioning system is used
mirrors (depending on the vehicle). It
the button’s warning light 4.
for:
automatically activates the air condi-
Manual use
tioning and rear screen de-icing func-
– lowering the temperature inside the
tions.
passenger compartment;
Press button 4, the button’s warning
light comes on.
Press button 2 to stop the heated rear
– eliminating condensation more
screen operating, and the integrated in-
quickly.
Prolonged use of this position may lead
dicator goes out.
to odours, caused by non-renewal of
air, and the formation of condensation
To exit this function, press button 7
on the windows. To avoid this, air recir-
or 5.
culation is disabled automatically after
a certain time.
Fuel consumption increases when
the air conditioning is being used
Using the demisting/de-icing func-
(switch it off when it is not required).
tion will disable the air recirculation.
3.8