REAR HEAD RESTS
2
1
Position for use
To refit the headrest
When the headrest is set at the
lowest position, this is for storage
Lift the headrest fully until it locks.
Enter the rods in their housing and
only. It should not be in this position
push down the headrest until it locks to
Check that the bonnet is correctly
when a seat is occupied.
use it in the high position.
locked.
Check that the bonnet is correctly
locked.
To remove the headrest
Raise the headrest as far as it will go,
Folding positions 2 for the
then press button 1 and remove the
headrest
headrest.
Press the button 1 and lower the head-
rest completely.
The headrest is a safety
component; check that it is
fitted and in the correct po-
sition.
3.33
English 
