REAR BENCH SEAT
Note: before moving the small
section of the seatback (depending
on vehicle), make sure to clip the
central seat belt tongue into the
corresponding
buckle
before
folding down the seat squab, then
the seatback.
B
1
A
The seat and the seatback may be
folded away to allow bulky objects
to be carried.
Transporting objects
If you have to place objects on the
folded seatback, it is vital that you
remove the headrests before folding
the seatback so that it can be folded
as flat as possible. See the
information on transporting objects
in the luggage compartment in
Section 3.
- When
repositioning
the seatback, check
that it is correctly
locked.
To fold away the seat
Tilt seatbase A against the front
seats.
- If seat covers are fitted, make
sure these do not prevent the
seatback latch from locking in.
To fold down the seatback
After folding the seat base down,
lower the rear headrests, refer to the
section on the rear headrest, then
pull handle 1 and fold down the
seatback(s) B.
- Ensure that the belts and
buckles are in their correct
positions.
- Reposition the headrests.
3.30
English 
