LANE DEPARTURE WARNING (2/2)
The function sounds the alarm if:
Adjustment
a line is crossed without activating the
indicator lights. The function alerts the
From the vehicle settings customisation
menu (please refer to the information
on the “Vehicle settings customisation
menu” in Section 1), you can:
– adjust the alert audio volume. To
do this, select “lane departure alert:
volume” (five levels);
– adjust the alert sensitivity. To do this,
select “lane departure alert: sensiti-
vity” (three levels).
driver through warning light
the instrument panel, along with a beep.
ꢁ
on
Conditions for non-activation
of alerts
– Indicators activated or having been
activated less than approximately
four seconds prior to departing from
the lane;
1
Deactivation
– Very fast lane departure;
– Driving continuously on a line;
– On bends, the function allows for
slightly cutting the bend;
Press button 1 on the central rear-view
mirror.
The warning light on button 1 goes out,
accompanied by a message on the ins-
trument panel “Lane departure warning
de-activated”.
Activation
Press button 1: the warning light on
the 1 button lights up, accompanied by
the message “Lane departure warning
activated” and a beep.
– ...
The function is set to notify the
driver if:
Operating faults
In the event of a malfunction, a mes-
sage “Lane departure warning check” is
displayed on the instrument panel, and
the warning light on button 1 stays off.
Consult an approved dealer.
– the warning light on the 1 button
lights up;
and
– the vehicle speed is greater than ap-
proximately 45 mph (70 km/h);
and
– lines are detected.
Warning light
instrument panel to notify the driver.
ꢀ
comes on on the
2.30
English 
