WIPER BLADES: REPLACEMENT
Replacing windscreen wiper
blades 2
6
Refitting
To refit the wiper blade 2 , insert it in-
to its housing in the arm 3 , then clip it
until you hear a click. Make sure that
the blade is correctly locked in posi-
tion.
To return the blades to the lowered
position, make sure that the blades
are folded down onto the wind-
screen then set the stalk 1 to posi-
tion A (single sweep): the wind-
screen wiper blades will fold into the
bonnet when the ignition is switched
on.
Check the condition of
the wiper blades. You are
responsible for their ser-
To replace the wipers, first put them
in the service position B .
vice life:
With the ignition on and the engine
stopped:
– clean the blades and the
windscreen regularly with
soapy water;
– do not use them when the
windscreen is dry;
– free them from the wind-
screen when they have not
been used for a long time.
– move the stalk 1 twice in succes-
sion to position A (single sweep): the
wiper blades will stop in the service
position B away from the bonnet;
– press the button 4 then remove
the blade upwards.
3 6 2 - P r a c t i c a l a d v i c e
English 
