Get Technical specifications Guide for Renault Scenic 4 Door Fifth Generation (2023-2026)

INFORMATION ABOUT THE VEHICLE

Vehicle identification plates

5. MTR (Gross Train Weight: vehicle

fully loaded, with trailer).

6. MMTA (Maximum Permissible

Weight) front axle.

7. MMTA rear axle.

8. Area reserved for related or addi-

tional entries.

9. Paint reference (colour code).

Technical Information for the

emergency services

The information shown on the vehi-

cle identification plate should be

quoted on all correspondence or or-

ders.

7

The presence and location of the in-

formation depends on the vehicle.

Identification plate A

1. Manufacturer name.

2. EC design number or approval

number.

3. Identification number.

Depending on the vehicle, this infor-

mation is also provided on marking

B .

The QR Code on label A allows emer-

gency workers using a tablet or

smartphone to immediately access

the technical information useful for

working on the vehicle in the event

of an accident.

4. MMAC (Maximum permissible all-

up weight).

3 7 4 - T e c h n i c a l s p e c i f i c a t i o n s

INFORMATION ABOUT THE VEHICLE

Ensure that the label A is always vis-

ible and present on the windscreen

as well as the rear screen.

Engine specifications

Engine identification, engine

specifications

Engine identification

Any modification or damage would

prevent access to the information.

Engine type: 6AM

7

Please quote the information on the

engine plate or label A in all corre-

spondence or orders.

(Location varies depending on en-

gine)

1. Engine type.

2. Engine suffix.

3. Engine serial number.

T e c h n i c a l s p e c i f i c a t i o n s - 3 7 5

INFORMATION ABOUT THE VEHICLE

The lifting points are compatible

Information on lifting

with the use of a jack equipped with

a flat plate and a diameter between

80 mm and 140 mm.

To prevent any risk of

injury or damage to the

vehicle, the jack must

only be cranked until

The jack used must comply with the

country's current standards and

regulations. The jack lifting capacity

must be greater than the vehicle's

maximum permissible weight on the

relevant axle ꢀ 0.

The jack is only to be used to lift the

vehicle in order to change the

wheels. This must be performed:

the wheel you are replacing is at

most three centimetres off the

ground.

Risk of injury. Risk of damage to

the vehicle.

– with the parking brake applied,

– with the vehicle unladen,

For safety reasons, the

vehicle lifting points

must only be used to

– on level, non-slip and solid ground.

Before lifting the vehicle, the plate of

the jack must be correctly posi-

tioned against the lifting point 1 .

Place the jack horizontally: the jack

head must be lined up with the sill 1

closest to the wheel concerned, as

shown by an arrow 2 .

change the wheels. Un-

der no circumstances should

they be used:

Your vehicle is equipped with four

dedicated lifting points 1 located un-

derneath the vehicle.

7

– to carry out a repair;

– to access the underside of the

vehicle.

For your safety, we rec-

ommend that you con-

tact an approved deal-

Risk of injury. Risk of damage to

the vehicle.

er to change the

wheels. Risk of damage to the

vehicle and particularly to the

electric traction battery in the

event of incorrect positioning

of the lifting equipment.

3 7 6 - T e c h n i c a l s p e c i f i c a t i o n s

7

T e c h n i c a l s p e c i f i c a t i o n s - 3 7 7

INFORMATION ABOUT THE VEHICLE

Dimensions (in metres)

7

3 7 8 - T e c h n i c a l s p e c i f i c a t i o n s

INFORMATION ABOUT THE VEHICLE

Length

A

B

C

D

E

0,840

2,784

0,843

4,468

1.625 to 1.635

1,572 unladen

1.620 to 1.630

F

G

1,864

H

2.085 with door mirrors folded out

1.908 with door mirrors folded in

7

T e c h n i c a l s p e c i f i c a t i o n s - 3 7 9

INFORMATION ABOUT THE VEHICLE

Weights (in kg)

The weights indicated are for a basic vehicle without optional fittings: they vary according to your vehicle's equip-

ment. Consult your approved Dealer.

Maximum Permissible All-up Weight ( MMAC )

Maximum Permissible Weight ( MMTA )

Gross Train Weight ( MTR )

Weights indicated on the manufacturer's plate ꢀ 0

Braked Towing Weight *

found by calculating: MTR - MMAC

Unbraked Towing Weight *

750 kg

Permissible nose weight *

75 kg

Maximum permissible load on roof

80 kg (including carrying device)

* Towing weight (towing a caravan, boat, etc.)

7

Towing is prohibited when the MTR - MMAC calculation is equal to zero, or when the MTR is equal to zero (or is not indi-

cated) on the manufacturer's plate.

– It is important to respect local towing regulations in force, specifically those set out in the Highway Code. Contact an

approved Dealer for any modifications to towing equipment.

– For vehicles fitted with a trailer, the total train weight (vehicle + trailer) must never be exceeded. However the follow-

ing is tolerated:

– rear MMTA exceeded by up to 15%;

– MMAC exceeded by up to 10% or 100 kg (whichever limit is reached first).

In either case, the maximum speed of the vehicle and trailer must not exceed 62 mph (100 km/h) and the tyre pressures

must be increased by 0.2 bar (3 PSI).

3 8 0 - T e c h n i c a l s p e c i f i c a t i o n s

REPLACEMENT PARTS AND REPAIRS

Original parts are based on very stringent specifications and are subjected to specific tests. Therefore, they are of at

least the same level of quality as the parts fitted originally.

If you always fit genuine replacement parts to your vehicle, you will ensure that it performs well. Furthermore, repairs car-

ried out in the approved dealer network with original parts are guaranteed according to the conditions stated on the

back of the repair order.

7

T e c h n i c a l s p e c i f i c a t i o n s - 3 8 1

SERVICE SHEETS

VIN: ..................................................................................

Date:

Miles (km):

Invoice number:

Comments/miscellaneous

Type of operation:

Stamp

Service □

....................................... □

Anticorrosion check:

OK □ Not OK* □

Date:

Invoice number:

Type of operation:

Stamp

Service □

....................................... □

7

Anticorrosion check:

OK □ Not OK* □

Date:

Invoice number:

Type of operation:

Stamp

Service □

....................................... □

Anticorrosion check:

OK □ Not OK* □

* See specific page

3 8 2 - T e c h n i c a l s p e c i f i c a t i o n s

SERVICE SHEETS

VIN: ..................................................................................

Date:

Miles (km):

Invoice number:

Comments/miscellaneous

Type of operation:

Stamp

Service □

....................................... □

Anticorrosion check:

OK □ Not OK* □

Date:

Invoice number:

Type of operation:

Stamp

Service □

....................................... □

7

Anticorrosion check:

OK □ Not OK* □

Date:

Invoice number:

Type of operation:

Stamp

Service □

....................................... □

Anticorrosion check:

OK □ Not OK* □

* See specific page

T e c h n i c a l s p e c i f i c a t i o n s - 3 8 3

SERVICE SHEETS

VIN: ..................................................................................

Date:

Miles (km):

Invoice number:

Comments/miscellaneous

Type of operation:

Stamp

Service □

....................................... □

Anticorrosion check:

OK □ Not OK* □

Date:

Invoice number:

Type of operation:

Stamp

Service □

....................................... □

7

Anticorrosion check:

OK □ Not OK* □

Date:

Invoice number:

Type of operation:

Stamp

Service □

....................................... □

Anticorrosion check:

OK □ Not OK* □

* See specific page

3 8 4 - T e c h n i c a l s p e c i f i c a t i o n s

SERVICE SHEETS

VIN: ..................................................................................

Date:

Miles (km):

Invoice number:

Comments/miscellaneous

Type of operation:

Stamp

Service □

....................................... □

Anticorrosion check:

OK □ Not OK* □

Date:

Invoice number:

Type of operation:

Stamp

Service □

....................................... □

7

Anticorrosion check:

OK □ Not OK* □

Date:

Invoice number:

Type of operation:

Stamp

Service □

....................................... □

Anticorrosion check:

OK □ Not OK* □

* See specific page

T e c h n i c a l s p e c i f i c a t i o n s - 3 8 5

SERVICE SHEETS

VIN: ..................................................................................

Date:

Miles (km):

Invoice number:

Comments/miscellaneous

Type of operation:

Stamp

Service □

....................................... □

Anticorrosion check:

OK □ Not OK* □

Date:

Invoice number:

Type of operation:

Stamp

Service □

....................................... □

7

Anticorrosion check:

OK □ Not OK* □

Date:

Invoice number:

Type of operation:

Stamp

Service □

....................................... □

Anticorrosion check:

OK □ Not OK* □

* See specific page

3 8 6 - T e c h n i c a l s p e c i f i c a t i o n s

SERVICE SHEETS

VIN: ..................................................................................

Date:

Miles (km):

Invoice number:

Comments/miscellaneous

Type of operation:

Stamp

Service □

....................................... □

Anticorrosion check:

OK □ Not OK* □

Date:

Invoice number:

Type of operation:

Stamp

Service □

....................................... □

7

Anticorrosion check:

OK □ Not OK* □

Date:

Invoice number:

Type of operation:

Stamp

Service □

....................................... □

Anticorrosion check:

OK □ Not OK* □

* See specific page

T e c h n i c a l s p e c i f i c a t i o n s - 3 8 7

ANTICORROSION CHECK

If the continuation of the warranty is subject to repair, it is indicated below.

VIN: ..................................................................................

Date of repair:

Stamp

Corrosion repair operation to be carried out:

Date of repair:

Stamp

7

Repair to be carried out:

3 8 8 - T e c h n i c a l s p e c i f i c a t i o n s

ANTICORROSION CHECK

If the continuation of the warranty is subject to repair, it is indicated below.

VIN: ..................................................................................

Date of repair:

Stamp

Corrosion repair operation to be carried out:

Date of repair:

Stamp

7

Repair to be carried out:

T e c h n i c a l s p e c i f i c a t i o n s - 3 8 9

ANTICORROSION CHECK

If the continuation of the warranty is subject to repair, it is indicated below.

VIN: ..................................................................................

Date of repair:

Stamp

Corrosion repair operation to be carried out:

Date of repair:

Stamp

7

Repair to be carried out:

3 9 0 - T e c h n i c a l s p e c i f i c a t i o n s

ANTICORROSION CHECK

If the continuation of the warranty is subject to repair, it is indicated below.

VIN: ..................................................................................

Date of repair:

Stamp

Corrosion repair operation to be carried out:

Date of repair:

Stamp

7

Repair to be carried out:

T e c h n i c a l s p e c i f i c a t i o n s - 3 9 1

ANTICORROSION CHECK

If the continuation of the warranty is subject to repair, it is indicated below.

VIN: ..................................................................................

Date of repair:

Stamp

Corrosion repair operation to be carried out:

Date of repair:

Stamp

7

Repair to be carried out:

3 9 2 - T e c h n i c a l s p e c i f i c a t i o n s

ANTICORROSION CHECK

If the continuation of the warranty is subject to repair, it is indicated below.

VIN: ..................................................................................

Date of repair:

Stamp

Corrosion repair operation to be carried out:

Date of repair:

Stamp

7

Repair to be carried out:

T e c h n i c a l s p e c i f i c a t i o n s - 3 9 3

ANTICORROSION CHECK

If the continuation of the warranty is subject to repair, it is indicated below.

VIN: ..................................................................................

Date of repair:

Stamp

Corrosion repair operation to be carried out:

Date of repair:

Stamp

7

Repair to be carried out:

3 9 4 - T e c h n i c a l s p e c i f i c a t i o n s

Technical specifications for Your Renault Scenic 4 Door Fifth Generation (2023-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals