AsSsipsetaendtlsimysiterms
Operating the speed limiter
Speed limiter
Lights up green
The speed limiter is switched on and ac-
tive.
Introduction
The speed limited helps the driver not to ex-
ceed a set speed.
WARNING
After use, always switch oꢀ the speed limiter
to prevent the speed being regulated against
your wishes.
Speed range
The speed limiter helps avoid exceeding a pro-
grammed speed, from 30 km/h (20 mph) ap-
prox. and faster.
●
The speed limiter does not relieve the
driver of their responsibility to drive at the
appropriate speed. Do not drive at high
speed if not necessary.
Fig. 101 On the multifunction steering wheel:
By selecting the speed limiter
buttons to control the speed limiter.
●
Using the speed limiter under adverse
The speed limitation can be interrupted at any
time by depressing the accelerator pedal fully,
beyond the point of resistance. As soon as the
saved speed is exceeded, the green indicator
light flashes and an audible warning signal may
sound. The speed is stored.
weather conditions is dangerous and can
cause serious accidents, e.g. aquaplaning,
snow, ice, leaves, etc. Only use the speed
limiter when the status of the road and the
weather conditions allow it.
Connecting
●
Press the
button.
Regulation has not yet taken place.
Start regulation
The limiter is reactivated automatically after re-
turning to less than the set speed.
●
While driving, press the button
.
The current speed is saved as a limit speed.
Status display
When the speed limiter is switched on, the
instrument cluster display shows the saved
speed and the system status:
Adjusting the speed
The programmed speed can be set:
+ 1 km/h (1 mph)
- 1 km/h (1 mph)
+ 10 km/h (5 mph)
- 10 km/h (5 mph)
It lights up grey
The speed limiter is switched on but reg-
ulation is not active.
139
English 
