2017-2026 Seat Arona 4 Door Safety -> Seat belts User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety -> Seat belts for Your Seat Arona 4 Door First Generation (2017-2026)

Seatbelts  
the risk of severe or even lethal injuries. The risk  
of severe or fatal injuries is especially height-  
ened when a deploying airbag strikes a vehicle  
occupant who has assumed an incorrect sitting  
position. The driver is responsible for all people,  
particularly children, inside the vehicle.  
Properly worn seat belts hold the occupants  
in the proper position. They also help prevent  
uncontrolled movements that may result in seri-  
ous injury and reduce the risk of being thrown  
out of the vehicle in case of an accident.  
WARNING  
Sitting in an incorrect position increases the  
risk of severe or fatal injuries in the event  
of accidents and sudden braking or manoeu-  
vres.  
Vehicle occupants wearing their seat belts cor-  
rectly benefit greatly from the ability of the  
belts to absorb kinetic energy. In addition, the  
front part of your vehicle and other passive  
safety features (such as the airbag system) are  
designed to absorb the kinetic energy released  
in a collision. Taken together, all these features  
reduce the releasing kinetic energy and conse-  
quently, the risk of injury. This is why it is so  
important to fasten seat belts before every trip,  
even when "just driving around the corner".  
All occupants must sit correctly during the  
The following list contains examples of incor-  
rect sitting positions that could be dangerous  
for all vehicle occupants.  
journey and wear the seat belt correctly.  
Occupants of the vehicle that are not sit-  
ting correctly, not wearing the seat belt or  
are not at a proper distance of the airbag risk  
suꢀering very serious or lethal injuries, espe-  
cially if the airbags deploy and strike them.  
When the vehicle is in motion:  
Never stand in the vehicle.  
Never stand on the seats.  
Never kneel on the seats.  
Seat belts  
Never tilt your seat backrest too far to the  
Ensure that your passengers wear their seat  
belts as well. Accident statistics have shown  
that wearing seat belts is an e„ective means of  
substantially reducing the risk of injury and im-  
proving the chances of survival when involved  
in a serious accident. Furthermore, properly  
worn seat belts improve the protection provi-  
ded by airbags in the event of an accident. For  
this reason, wearing a seat belt is required by  
law in most countries.  
rear.  
Introduction  
Never lean against the instrument panel.  
Never lie on the rear seats.  
Never sit on the front edge of a seat.  
Never sit sideways.  
Never lean out of a window.  
Never put your feet out of a window.  
Never put your feet on the instrument panel.  
Never place your feet on the bench or on the  
Although your vehicle is equipped with airbags,  
the seat belts must be fastened and worn. The  
front airbags, for example, are only triggered in  
some cases of head-on collision. The front air-  
bags will not be triggered during minor frontal  
or side collisions, rear-end collisions, overturns  
or accidents in which the airbag trigger thresh-  
old value in the control unit is not exceeded.  
backrest of the seat.  
Never travel in a footwell.  
Fig. 19 Drivers with properly worn seat belts  
will not be thrown forward in the event of  
sudden braking.  
Never sit on the armrests.  
Never travel without wearing the seat belt.  
Never travel in the luggage compartment.  
39  
Safety  
Fasten your seat belt securely.  
Important safety instructions for the use of  
seat belts  
Never use seat belt clips, fastening rings or  
similar items to alter the position of the belt  
Instruct your passengers to fasten their seat  
webbing.  
belts properly before driving o„.  
Always wear the seat belt as described in this  
Frayed or torn seat belts or damage to  
Protect children by using a child seat ac-  
section.  
the connections, belt retractors or parts of  
the buckle could cause severe injuries in the  
event of an accident. Therefore, you must  
check the condition of all seat belts at regu-  
lar intervals.  
cording to the child's height and weight  
››› page 51.  
Ensure that the seat belts can be fastened at  
all times and are not damaged.  
When starting to drive, if the vehicle's speed  
exceeds approx. 25 km/h (15 mph) and the seat  
belts are not fastened or are unfastened while  
driving, a warning sound will be heard for a few  
seconds. In addition, the warning lamp on the  
instrument cluster display flashes.  
WARNING  
If seat belts are worn incorrectly or not at  
Seat belts which have been worn in an ac-  
all, the risk of severe injuries increases. The  
optimal protection from seat belts can be  
achieved only if you use them properly.  
cident and have been stretched must be re-  
placed by a specialised workshop. Renewal  
may be necessary even if there is no ap-  
parent damage. The belt anchorage should  
also be checked.  
Never allow two passengers (even chil-  
The lamp goes out when the driver and pas-  
senger seat belts are fastened with the ignition  
switched on.  
dren) to share the same seat belt.  
Never unbuckle a seat belt while the vehi-  
Do not attempt to repair a damaged seat  
cle is in motion. Risk of fatal injury.  
belt yourself. The seat belts must not be re-  
Rear seat belts fastened display  
moved or modified in any way.  
The seat belt should never lie on hard or  
fragile objects (such as glasses or pens, etc.)  
The belts must be kept clean, otherwise  
because this can cause injuries.  
the retractors may not work properly.  
Do not allow the seat belt to be damaged  
or jammed, or to rub on any sharp edges.  
Seat belt buckled indication  
Never wear the seat belt under the arm or  
in any other incorrect position.  
It lights up red  
The driver or passenger has not fastened  
the seat belt.  
Bulky and unfastened clothing (such as an  
overcoat over a sweater) impairs the proper  
fit and function of the seat belts, reducing  
their capacity to protect.  
The control lamp lights up to remind the  
driver to fasten their seat belt.  
Fig. 20 Instrument cluster: indication of the  
status of the rear seat seat belts.  
The slot in the seat belt buckle must not be  
Before starting the vehicle:  
blocked with paper or other objects, as this  
can prevent the latch plate from engaging  
securely.  
40  
Seatbelts  
Depending on the version of the model, when  
the ignition is switched on, the status display of  
the belts ››› Fig. 20 informs the driver on the in-  
strument panel display whether the occupants  
of the rear seats have their seat belts fastened.  
The e„ects of the laws of physics in the case of  
a head-on collision are easy to explain: the mo-  
ment a vehicle starts moving, a type of energy  
called “kinetic energy” starts acting on both the  
vehicle and its passengers.  
Head-on collisions and the laws of  
physics  
The amount of “kinetic energy” depends on the  
speed of the vehicle and on the weight of the  
vehicle and of its passengers. The higher they  
are, the more energy there is to be “absorbed”  
in the event of an accident.  
Depending on the seat occupancy and the sta-  
tus of the seat belts, the following symbols light  
up in di„erent colours:  
The white symbol indicates that the cor-  
responding seat is empty.  
The most significant factor, however, is the  
speed of the vehicle. If the speed doubles from  
25 km/h (15 mph) to 50 km/h (30 mph), for  
example, the corresponding kinetic energy is  
multiplied by four.  
A green symbol indicates that the seat is  
occupied and the occupant is wearing the  
seat belt.  
Fig. 21 A driver not wearing a seat belt may be  
thrown forward violently.  
A red symbol indicates that the seat is oc-  
cupied and the occupant is not wearing  
the seat belt.  
Given that the passengers of the vehicle in our  
example do not have their seat belts fastened,  
in the event of a collision the entire amount of  
the passengers' kinetic energy will be only ab-  
sorbed by the mentioned impact.  
If a rear seat occupant unfastens his/her seat  
belt while driving, the symbol lights up per-  
manently in red for that seat. In addition, the  
red warning light flashes on the instrument  
cluster screen. If you drive faster than approx.  
25 km/h (15 mph), an audio signal sounds for a  
few seconds.  
Even at speeds of 30 km/h (19 mph) to 50 km/h  
(30 mph), the forces acting on bodies in a colli-  
sion can easily exceed one tonne (1000 kg). At  
greater speed these forces are even higher.  
Vehicle occupants not wearing seat belts are  
not “attached” to the vehicle. In a head-on col-  
lision, they will move forward at the same speed  
their vehicle was travelling just before the im-  
pact. This example applies not only to head-on  
collisions, but to all accidents and collisions.  
If a seat belt is fastened or unfastened while  
driving in any of the rear seats, the seat belt  
status is displayed for approximately 30 sec-  
onds.  
Fig. 22 Any rear seat occupants not wearing  
a seat belt may be thrown forward violently,  
hitting the driver who is wearing the seat belt.  
Even at low speeds the forces acting on the  
body in a collision are so great that it is not pos-  
sible to brace oneself with one's hands. In the  
41  
Safety  
event of a head-on collision, vehicle occupants  
not wearing a seat belt will be thrown uncon-  
trollably forward and will collide, for example,  
against the steering wheel, instrument panel or  
windscreen ››› Fig. 21.  
Releasing the seat belt  
Only unfasten the seat belt when the vehicle  
has come to a standstill ›››  
.
Press the red button on the buckle ››› Fig. 24.  
The latch plate is released from the buckle.  
It is also important for rear passengers to wear  
seat belts properly, as they could otherwise be  
thrown forward violently through the vehicle in-  
terior in an accident. If a rear seat occupant  
is not wearing a seat belt, they are not only en-  
dangering themselves but also the occupants  
of the front seats ››› Fig. 22.  
Guide the belt back by hand so that it rolls up  
easily and the trim will not be damaged.  
WARNING  
Fig. 24 Release the seat belt's latch plate.  
The seat belt cannot oꢀer its full protec-  
tion unless the seat backrest is in an upright  
position and the seat belt is worn correctly,  
according to your size.  
Properly worn seat belts hold the vehicle occu-  
pants in the position that most protects them  
in the event of an accident or sudden braking  
Fastening and unfastening the seat  
belt  
Unbuckling your seat belt while the vehicle  
›››  
.
is in motion can cause severe or fatal injuries  
in the event of an accident or sudden brak-  
ing.  
Fastening the seat belt  
Fasten your seat belt before each trip.  
The seat belt itself, or a loose seat belt,  
can cause severe injuries if the belt moves  
from hard areas of the body to soft areas  
(e.g. the stomach).  
Adjust the front seat and head restraint cor-  
rectly ››› page 37.  
Engage the seat backrest of the rear seat in  
an upright position ›››  
.
Pull the latch plate and place the belt web-  
bing evenly across your chest and lap. Do not  
twist the seat belt when doing so ›››  
.
Fig. 23 Insert the latch plate of the seat belt  
into the buckle.  
Insert the buckle plate in the buckle of the  
correct seat ››› Fig. 23.  
Pull the belt to ensure that the latch plate is  
securely engaged in the buckle.  
42  
Seatbelts  
will hold the vehicle occupants in the optimum  
position to ensure the airbag provides the max-  
imum protection. The seat belt must therefore  
always be worn and the webbing correctly  
positioned.  
Correct position of the seat belt  
WARNING  
An incorrectly worn seat belt web can cause  
severe or fatal injuries in the event of an acci-  
dent.  
The shoulder part of the seat belt must lie  
Incorrectly worn seat belts can cause severe or  
even fatal injuries ››› page 37, Correct sitting  
position of vehicle occupants.  
on the centre of the shoulder, never across  
the neck or the arm.  
The seat belt must lie flat and fit comforta-  
The shoulder part of the seat belt must lie  
bly on the torso  
on the centre of the shoulder, never across the  
neck or the arm, under the arm or behind the  
shoulder.  
The lap part of the seat belt must lie across  
the pelvis, never across the stomach. The  
seat belt must lie flat and fit comfortably on  
the pelvis Pull the belt tight if necessary to  
take up any slack.  
Fig. 25 Correct seat belt and headrest  
positions, viewed from front and the side.  
The lap part of the seat belt must lie across  
the pelvis, never across the stomach.  
The seat belt must lie flat and fit comfortably.  
In the case of pregnant women, the ab-  
Pull the belt tight if necessary to take up any  
slack.  
dominal strap of the seat belt should pass  
as low as possible across the pelvic area,  
resting flat and “surrounding” the abdomen  
››› Fig. 26.  
In the case of pregnant women, the seat belt  
should pass uniformly over the chest and as  
low as possible through the pelvic area with the  
strap flat so it does not press down on the ab-  
domen; in addition, it must be used throughout  
the entire pregnancy ››› Fig. 26.  
Do not twist the seat belt while it is fas-  
tened.  
Once the seat belt is positioned correctly,  
don't pull it away from your body with your  
hand.  
Adapting the position of the belt webbing to  
your size  
Do not lie the seat belt across rigid or frag-  
ile objects, e.g. glasses, pens or keys.  
Fig. 26 Position of seat belt during pregnancy.  
The position of the seat belt can be adapted by  
adjusting the height of the front seats.  
Never use seat belt clips, retaining rings or  
similar instruments to alter the position of the  
Seat belts o„er their maximum protection in  
the event of an accident and reduce the risk  
of sustaining severe or fatal injuries only when  
they are properly positioned. Furthermore, if the  
webbing is correctly positioned, the seat belt  
belt webbing.  
43  
Safety  
Seat belt tensioner  
Note  
Note  
The seat belts on the front seats and, depend-  
ing on the equipment, side rear seats are fitted  
with tensioners.  
If your physical constitution prevents you  
from maintaining the correct position of the  
belt webbing, contact a specialised work-  
shop for help with any special devices to en-  
sure the optimum protection of the seat belt  
and airbag. SEAT recommends taking your  
car in for technical service.  
After certain driving situations, the reversi-  
ble belt tensioners may be left permanently  
tensioned1). In this case, to loosen the belt, it  
must be removed manually while the vehicle  
is stationary and then replaced correctly.  
The tensioners are activated by sensors in the  
event of severe head-on, side and rear colli-  
sions, and tension the seat belts in a direction  
opposite their extension.  
The relevant safety requirements must be  
observed if the vehicle or any components of  
the system are to be scrapped. Specialised  
workshops are aware of these requirements.  
If the seat belt is slack, the tensioner tightens  
it. This cushions the movement of occupants  
forwards towards the impact.  
Automatic retractor, tensioner and  
belt force limiter  
The belt pre-tensioners work in combination  
with the airbag system. In case of overturn, the  
pre-tensioners do not activate unless the head  
airbags are deployed.  
Maintenance and disposal of seat  
belt tensioners  
Vehicle seat belts are part of the vehicle’s  
safety system ››› page 37. This system has the  
following important functions:  
The belt tensioners are components of the seat  
belts that are installed in the seats of your  
vehicle. If you work on the belt tensioners or  
remove and install parts of the system when  
performing other repair work, the seat belt may  
be damaged. The consequence may be that,  
in the event of an accident, the belt tensioners  
function incorrectly or may not function at all.  
When activated, a fine powder may be re-  
leased. This is completely normal and it is not  
an indication of fire in the vehicle.  
Automatic belt retractor  
The seat belt shoulder straps on the driver's  
and front passenger seats, as well as those on  
the rear side seats (and, depending on equip-  
ment, also the seat belt of the central rear  
seat) are fitted with automatic retractors. This  
device ensures complete freedom of movement  
when the shoulder strap is pulled gently or  
during normal driving. However, during sudden  
braking, when driving in the mountains, around  
bends and when accelerating, the retractor  
locks the seat belt if it extends rapidly.  
Belt force limiter  
Depending on the equipment and the country  
in question, in the event of an accident, the seat  
belt force limiter reduces the force the seat belt  
exerts on the body.  
So that the e„ectiveness of the seat belt ten-  
sioner is not reduced and that removed parts  
do not cause any injuries or environmental pol-  
lution, regulations, which are known to the spe-  
cialised workshops, must be observed.  
1)  
Only if fitted with the PreCrash System.  
44  

Related Topics

Popular Owner Manuals