2016-2020 Seat Ateca SUV Safety -> Transporting children safely User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety -> Transporting children safely for Your Seat Ateca SUV First Generation (2016-2020)

Operation  
Priority 2 warning (yellow). The symbol  
lights up or flashes (in part accompa-  
nied by audible warnings). Operating  
faults or the lack of operating fluids can  
cause damage to the vehicle or a fault.  
Check the faulty function as soon as  
possible. If necessary, seek professional  
assistance.  
The message on the instrument panel display  
can be switched off by pressing the   
button on the windscreen wiper lever or the  
button  on the multi function steering  
wheel››› page 122.  
The message can be recalled to the instru-  
ment panel display using the multifunction  
display››› page 112.  
Fatigue detection (break recom-  
mendation)*  
Information message. It provides informa-  
tion about processes in the vehicle.  
Conditions of operation  
Driving behaviour is only calculated on  
speeds above about 65 km/h (40 mph) up to  
around 200 km/h (125 mph).  
Note  
Depending on the equipment, some set-  
tings and instructions can be carried out or  
displayed on the infotainment system as  
well.  
Fig. 126 On the screen of the instrument pan-  
el: fatigue detection.  
Switching on and off  
Fatigue detection can be activated or deacti-  
vated in the Easy Connect system with the  
 / button and the SETTINGS function but-  
The Fatigue detection informs the driver when  
their driving behaviour shows signs of fatigue.  
If there are several warnings at the same  
time, the symbols will be displayed one af-  
ter the other for a few seconds. The sym-  
bols will stay on until you remove the  
cause.  
ton›››  
page 36. A mark indicates that the  
adjustment has been activated.  
Function and operation  
Fatigue detection determines the driving be-  
haviour of the driver when starting a journey,  
making a calculation of tiredness. This is con-  
stantly compared with the current driving be-  
haviour. If the system detects that the driver is  
tired, an audible warning is given with a  
sound and an optic warning is shown with a  
symbol and complementary message on the  
instrument panel display››› Fig. 126. The  
message on the instrument panel display is  
shown for approximately 5 seconds, and de-  
pending on the case, is repeated. The system  
stores the last message displayed.  
If when switching on the ignition warnings  
System limitations  
are shown about existing faults, it might not  
be possible to change the settings or show  
the information as described. In this case,  
go to a specialised workshop and request a  
repair.  
The Fatigue detection has certain limitations  
inherent to the system. The following condi-  
tions can limit the Fatigue detection or pre-  
vent it from functioning.  
At speeds below 65 km/h (40 mph)  
At speeds above 200 km/h (125 mph)  
When cornering  
On roads in poor condition  
114  
Instruments and warning/control lamps  
Traffic sign detection system*1)  
In unfavourable weather conditions  
When a sporty driving style is employed  
In the event of a serious distraction to the  
In some situations, the system may incor-  
rectly interpret an intended driving ma-  
noeuvre as driver tiredness.  
No warning is given in the event of the ef-  
driver  
fect called microsleep!  
Fatigue detection will be restored when the  
vehicle is stopped for more than 15 minutes,  
when the ignition is switched off or when the  
driver has unbuckled their seat belt and  
opened the door.  
Please observe the indications on the in-  
strument panel and act as is necessary.  
Note  
Fatigue detection has been developed  
In the event of slow driving during a long peri-  
od of time (below 65 km/h, 40 mph) the sys-  
tem automatically re-establishes the tired-  
ness calculation. When driving at a faster  
speed the driving behaviour will be recalcula-  
ted.  
for driving on motorways and well paved  
roads only.  
If there is a fault in the system, have it  
checked by a specialised workshop.  
WARNING  
Do not let the comfort afforded by the Fati-  
gue detection system tempt you into taking  
any risks when driving. Take regular breaks,  
sufficient in length when making long jour-  
neys.  
Fig. 127 On the instrument panel display: ex-  
amples of speed limits or overtaking prohibi-  
tions with their respective additional signs.  
The driver always assumes the responsi-  
bility of driving to their full capacity.  
The traffic sign detection system records the  
standard traffic signs in front of the vehicle  
with a camera located on the base of the in-  
terior mirror and provides information about  
speed limits and overtaking prohibitions.  
Never drive if you are tired.  
The system does not detect the tiredness  
of the driver in all circumstances. Consult  
the information in the section››› page 114,  
System limitations.  
»
1)  
System available depending on the country.  
115  
Operation  
Within its limitations, the system also displays  
additional signals, such as time-specific pro-  
hibitions, signs for vehicles towing trailers  
››› page 330 or limitations that only apply in  
the event of rain. Even on journeys without  
signs, the system may display any applicable  
speed limits.  
interior rear-view mirror records the traffic  
signs in front of the vehicle. After checking  
and evaluating the information from the cam-  
era, the navigation system and the current  
vehicle data, up to three valid traffic signs are  
displayed››› Fig. 127 B in conjunction with  
their corresponding additional signs.  
Message  
Cause and solution  
Speed warning  
currently un-  
available.  
The speed warning function of  
the traffic sign detection sys-  
tem is faulty.  
Have the system checked by a  
specialised workshop.  
Detection of  
traffic  
signs: Clean  
the wind-  
screen!  
The windscreen is dirty in the  
camera area.  
The traffic sign detection system does not  
work in all countries. Keep this in mind when  
travelling abroad.  
First: The sign that is currently valid for the  
driver is shown in the left side of the  
Clean the windscreen.  
screen For example, a maximum speed  
limit of 130km/h(100mph)››› Fig. 127 A.  
Indication on the display  
Detection of  
traffic  
signs: Limi-  
ted at the  
moment  
No data transfer by the navi-  
gation system.  
Second: A sign valid only in certain circum-  
stances, e.g. 100km/h(60mph) is shown  
second, together with the additional rain  
sign.  
Additional sign: If the windscreen wiper is  
working while you are driving, the signal  
with the additional rain sign will be  
shown first, on the left, as it is the one  
that is applicable at the time.  
In Germany, on motorways and vehicle  
roads, besides speed limits and overtaking  
provisions the system also displays the end of  
prohibition signs. The valid speed limit at the  
time in other countries is always shown.  
Check whether the navigation  
system has current maps.  
OR: the vehicle is currently in a  
region that is not included in  
the navigation system's map.  
The traffic signs detected by the system are  
displayed on the dash panel display  
No data  
available  
The traffic sign detection sys-  
tem does not work in the cur-  
rent country.  
››› Fig. 127 and, depending on the navigation  
system fitted in the vehicle, on the infotain-  
Third: A sign valid only with restrictions, e.g.  
No overtaking at certain times, will be  
displayed third››› Fig. 127 C.  
ment system as well›››  
page 36.  
Activating and deactivating traffic sign  
display on the instrument panel  
Traffic sign detection system messages  
The permanent display of traffic signs on the  
instrument panel can be activated or deacti-  
vated in the infotainment system using the  
 > SETTINGS> Driver Assistance  
function buttons.  
Message  
Cause and solution  
Speed warning  
If the system detects that the permitted  
speed is exceeded, it may warn the driver  
with a “gong” and visually with a message on  
the dash panel display.  
There are no  
traffic signs  
available  
The system is starting up.  
OR: the camera has not rec-  
ognised any obligation or pro-  
hibition signs.  
Display of traffic signs  
Error: Detec-  
tion of traf-  
fic signs  
There is a fault in the system.  
Have the system checked by a  
specialised workshop.  
The speed warning can be adjusted or deac-  
tivated completely in the infotainment system  
using the  > SETTINGS > Driver  
When the traffic sign detection system is con-  
nected, a camera located on the base of the  
116  

Related Topics

Popular Owner Manuals