Dash panel
after the other for about 2 seconds at a time
and will continue until the fault is corrected.
●
For the sake of the environment
The engine compartment is a dangerous
area. Before you open the bonnet to work on
the engine or in the engine compartment,
switch the engine off and allow it to cool to
reduce the risk of burns or other injuries.
Read and observe the relevant warnings
››› page 166.
Changing up a gear early will help you to save
fuel and minimise emissions and engine
noise.
No menus will be shown in the display for the
duration of a priority 1 warning message.
Examples of priority 1 warning messages
(red)
Speedometer
●
Brake system symbol with the warning
Note
The speedometer is equipped with a digital
odometer and a trip odometer, in addition to
a service intervals display.
message STOP BRAKE FLUID INSTRUCTION
MANUAL or STOP BRAKE FAULT INSTRUCTION
MANUAL.
●
The appropriate control lamp for a fault will
light up in vehicles without warning or infor-
mation messages in the display.
●
During the running-in period, the instructions
shown on ››› page 134 should be followed.
Coolant symbol with the warning mes-
●
In vehicles with warning or information
sage STOP SEE COOLANT INSTRUCTION MAN-
UAL.
messages on the screen, the appropriate con-
trol lamp for a fault will light up and a warn-
ing or information message will also appear
on the screen.
●
Engine oil pressure symbol with the
warning message STOP ENGINE OIL PRESSURE
LOW! INSTRUCTION MANUAL.
Warning lamps
Overview of the warning lamps
Warning messages, Priority 2 (yellow)
Warning symbols
If one of these faults occurs, the correspond-
ing warning lamp lights up and is accompa-
nied by an audible warning. Check the corre-
sponding function as soon as possible al-
though the vehicle may be used without risk.
Read the additional information carefully
There are red warning symbols (priority 1)
and yellow warning symbols (priority 2).
›››
page 18
WARNING
Warning messages, Priority 1 (red)
●
Failure to observe control lamps and warn-
If one of these faults occurs, the warning
lamp will light up or flash and will be accom-
panied by three audible warnings. This is a
danger warning. Stop the vehicle and switch
off the engine. Check the fault and correct it.
Obtain professional assistance if necessary.
ing messages can result in serious personal
injuries or damage to your vehicle.
If several priority 2 warning messages are de-
tected at the same time, the symbols are dis-
played one after the other for about 2 sec-
onds at a time. After a set time, the informa-
tion text will disappear and the symbol will
be shown as a reminder at the side of the
display.
●
The risk of an accident increases if your ve-
hicle breaks down. Use a warning triangle to
draw the attention of other road users in or-
der to prevent danger to third parties.
If several priority 1 faults are detected at the
same time, the symbols will be displayed one
»
57
English 
