Air conditioning
113
Air conditioning
output, which is needed to defrost the windows quickly, is only available
when the engine has reached its operating temperature.
Heating
Blower
Controls
B
The air flow can be set at four speeds with switch A. The blower should
always be set at the lowest speed when driving slowly.
Air distribution
C
Control A for setting the flow of air in the required direction.
– Air distribution towards the windscreen. Air recirculation is, for safety
reasons, not possible in this position.
– Air distribution to the upper body.
– Air distribution to footwell
– Air distribution to the windscreen and the footwell.
Air recirculation mode
Fig. 85 On the dash
panel: Heater controls
D
Air recirculation A on (button symbol
in the outside air from entering the vehicle interior, for example when driving
through a tunnel or queuing in traffic ⇒
lights up) prevents strong odours
.
A
C
B
–
–
Using the controls ⇒ fig. 85 A and A and with the switch A
you can set the temperature, air distribution and the blower
When the outside temperature is low, using air recirculation mode provides
more effective heating by heating air from the vehicle interior instead of cold
air from outside.
speed.
D
Press the button A to switch air recirculation mode on or off. A
button is illuminated by a yellow lamp for as long as the function
is switched on.
WARNING
•
For your safety, the windows should never be fogged up or covered with
snow or ice. This is essential to ensure good visibility. Please familiarize
yourself with the correct operation of the heating and ventilation system,
including the demist/defrost functions for the windows.
Temperature
A
The switch A sets the temperature. The required temperature inside the
vehicle cannot be lower than the ambient temperature. Maximum heat
Safety First
Operating instructions
Tips and Maintenance
Technical Data
English 
