2012-2020 Seat Leon 4 Door Infotainment System -> Operating modes User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Infotainment System -> Operating modes for Your Seat Leon 4 Door Third Generation (2012-2020)

Operating modes  
Function button: function  
Operating modes  
Opens the setup menu of the active  
SETTINGS  
frequency band (FM, AM or DAB).  
Radio  
Selects the previous or next stored sta-  
tion or of the station list. This setting  
can be changed in the Radio settings  
menu (FM, AM, DAB).  
Related video  
/
   
1 to 18a)  
›››  
Memory buttons page 202.  
Stops the scan function (only visible  
when the function is under way). It can  
be activated in the settings menu (FM,  
AM and DAB).  
Fig. 219 Radio mode: station list (FM).  
SCAN  
Press the infotainment button /  and  
then select the Radiocontext to open the RA-  
Fig. 217 Radio mode  
a)  
DIO main menu Fig. 218.  
The Media System / Touch Colour model has 15  
›››  
memories.  
RADIO main menu  
RADIO main menu function buttons  
Information and possible icons  
Function button: function  
Display: Meaning  
To change the group of memory but-  
View the frequency or the name of the  
1
tons slide a finger over the memory  
buttons from left to right or vice-versa  
station and, where applicable, the radio  
text. The name of the radio station and  
the radio text will only be displayed if  
equipped with RDS and if it is active.  
A
Allows you to select the frequency  
band.  
BAND  
STATION  
LIST  
Opens the list of currently receivable  
radio from the active frequency band.  
The RDS radio data service is deactiva-  
ted.  
RDS Off  
TP  
Allows you to select the frequency  
manually.  
Traffic information can be retrieved: se-  
lect Radio > Settings > Traffic  
station.  
MANUAL  
VIEW  
Fig. 218 RADIO main menu.  
Allows you to select the information  
shown on the screen. Only available in  
DAB mode.  
No stations with traffic news are availa-  
ble.  
»
201  
Infotainment System  
Memory buttons  
Display: Meaning  
Functions of the memory buttons  
The radio station is stored on a memory  
Move your finger over the screen  
button.  
from left to right or vice-versa.  
Change mem- OR: Press one of the function but-  
The tracking of alternative frequencies is  
disabled.  
AF off  
A
ory bank  
tons Fig. 220  
›››  
The memory buttons are displayed  
in three memory banks.  
Note  
●
The availability of AM and DAB bands de-  
Keep and hold the desired memory  
button until an audible signal is  
heard, the station will be stored on  
this memory button. You can also  
store a station from a station list.  
Storing the  
station on the  
memory but-  
tons  
pends on the country and/or equipment. In  
the event that the AM and DAB bands are  
not available, the BAND function button  
text will not be shown.  
Fig. 220 RADIO main menu.  
●
Bear in mind that being underground, in  
A station logo can be assigned to  
the stations stored on the memory  
buttons.  
In the RADIO main menu, you can store sta-  
tions from all available frequency wave-  
lengths on the numbered function buttons.  
These function buttons are called “memory  
buttons”.  
tunnels, in areas with tall buildings or  
mountains can interfere with radio signals.  
Storing the  
station logo on  
the memory  
buttons  
A logo is automatically assigned  
from the database if the Advanced  
●
Foil or metal-coated stickers attached to  
the windows may affect reception on vehi-  
cles with a window aerial.  
radio settings option is enableda)  
.
A logo can also be assigned man-  
ually from an external data source  
(USB/SD card).  
●
Radio stations are responsible for the  
Functions of the memory buttons  
content of the information they transmit.  
Press the memory button corre-  
a)  
Not available for the Media System Touch/Colour  
model.  
sponding to the desired station.  
Selecting the  
The stored stations can only be  
played by pressing the corre-  
sponding memory button provided  
it can be received at your current  
location.  
station from  
the memory  
buttons  
202  
Operating modes  
MEDIA main menu  
Function buttons of the main Media menu  
Media  
Function button: function  
Introduction  
Indicates the media source being  
played. Press to select another me-  
dia source page 205.  
›››  
JUKEBOX a): Internal hard drive (SSD)  
page 208.  
›››  
CD/DVD a): Internal CD and DVD  
drive page 205.  
›››  
Fig. 221 Related video  
SD CARD 1 , SD CARD 2 *: SD memory  
“Media sources” are audio sources contain-  
ing audio files on various different data stor-  
age devices (e.g. CD, memory card, external  
MP3 player). These audio files can be played  
by the Infotainment system via their corre-  
sponding drives or audio input sockets (inter-  
nal CD drive, memory card slot, AUX-IN multi-  
media socket etc.).  
Fig. 222 MEDIA main menu.  
card page 206.  
›››  
SOURCE  
USB 1 , USB 2 *: External data stor-  
Using the MEDIA main menu, different media  
sources can be selected and played.  
age device connected to the USB  
port page 206.  
›››  
●
Press the infotainment button /  and  
AUX : External audio source connec-  
ted to the AUX-IN multimedia socket  
then select the Mediacontext to open the  
MEDIA main menu Fig. 222.  
page 207.  
›››  
›››  
BT AUDIO : Bluetooth® audio  
It will continue playing the last media source  
selected from the same point.  
Copyright  
page 207.  
›››  
Audio and video files on data storage devices  
are usually protected by intellectual property  
rights, as per the corresponding national and  
international laws. Be aware of the current le-  
gal provisions!  
WLAN *b): External audio source con-  
The media source being played is indicated  
on the dropdown list when pressing the  
nected by WLAN page 210  
›››  
SOURCE function button Fig. 222.  
›››  
SELECTION Opens the track list.  
If there is no available media source, the ME-  
DIA main menu is displayed.  
Changes track in Media mode or fast  
/
   
forward/rewind.  
Note  
Playback stops. The function but-  
ton changes to .  
●
Do not use memory card adapters.  
●
SEAT assumes no liability for any deterio-  
ration or loss of files on data storage devi-  
ces.  
Playback is resumed. The func-  
tion button changes to .  
»
203  
Infotainment System  
Messages and symbols on the MEDIA main  
menu  
Function button: function  
Display: Meaning  
Play more like this.  
The TP function is active and can be  
TPb)  
Display: Meaning  
Creates a virtual playlist that in-  
tuned in.  
a)  
cludes tracks with a similar rhythm  
to the one being played if available  
Displays information about the artist  
name, album name and song title (CD  
There is no traffic news station available.  
b)  
using Gracenote®  
.
text , ID3 tag on compressed audio  
DAB not available.  
b)  
Opens the Media Settings  
files).  
SETTINGS  
menu.  
A
a)  
Gracenote® is a database available on the Infotain-  
ment system hard drive that contains information on  
the tracks of different artists and albums. In order for  
the user to benefit from the functions offered by  
Gracenote®, the tracks must contain the artist and/or  
album data (only available for the model: “Navi Sys-  
tem Plus”.  
Audio CD: displays track information if  
available via Gracenote®a). If no data is  
available, it only displays Trackand the  
number corresponding to the position it  
occupies on the data storage device.  
Repeat all tracks.  
Repeats all the tracks that are on the  
same memory level as the track be-  
ing played at that moment. If in the  
Media Settingsmenu the  
Mix/Repeat including subfolders op-  
tion is enabled, it also includes the  
subfolders.  
REPEAT  
View of album cover: If there are various  
covers within the same folder/album, the  
system only displays one of them.  
It prioritizes displaying the covers in the  
following manner:  
b)  
Depends on the market and unit in question.  
Note  
The current track will be repeated.  
1. Cover embedded in the file(s).  
●
REPEAT  
When the media source is inserted, play-  
2. Image in file folder.  
B
ing will not start automatically; it is neces-  
sary for the user to select the source. Nor  
will the media source change when it is  
ejected.  
3. Image provided by the Gracenote®a)  
database.  
Random play.  
4. Default icon for the connected device.  
Includes all the tracks that are on  
the same memory level as the track  
being played at that moment. If in  
the Media Settingsmenu the  
Mix/Repeat including subfolders op-  
tion is enabled, it also includes the  
subfolders.  
If playing a video file, by pressing the  
icon (cover) it can be played on full  
screen.  
●
In order to see the different covers inside  
MIX  
of the same album/folder, make sure that  
the tracks contain different information  
about the Artist or Album in its metadata. If  
not, you will see the same cover for all of  
tracks contained in the same album/folder.  
The playing time so far and time remain-  
ing in minutes and seconds. In the case  
C
of audio files with variable bit rates (VBR)  
a)  
the remaining time may vary.  
The DVD drive and the Jukebox (SSD) are only  
available for the “Navi System Plus” model.  
b)  
The RDS radio data service is deactiva-  
RDS  
Offb)  
Not available for the Media System Touch/Colour  
ted. The RDS can be activated in the FM  
setupmenu.  
model.  
204  
Operating modes  
Changing the Media source  
Insert or eject a CD or DVD1)  
3 Not available for model: Media System  
Touch/Colour  
Function button: media source  
Internal CD/DVD drive  
a)  
CD/DVD  
page 205.  
›››  
SD CARD 1  
SD memory card page 206.  
›››  
SD CARD 2 *  
USB 1  
External data storage device  
connected to the USB port   
USB 2 *  
page 206.  
›››  
External audio source connec-  
ted to the AUX-IN multimedia  
AUX  
socket page 207.  
›››  
Fig. 223 MEDIA mode: change media source.  
From the MEDIA main menu, press the  
BT AUDIO  
WLAN *b)  
Bluetooth® audio page 207.  
›››  
●
Fig. 224 Slots for data storage devices in the  
SOURCE function button Fig. 223 and se-  
External audio source connec-  
›››  
glove compartment.  
ted by WLAN page 210  
›››  
lect the desired media source.  
The driver should refrain from operating the  
unit while the vehicle is in motion. Insert or  
change the data storage device before mov-  
ing off!  
a)  
The DVD drive and the Jukebox (SSD) are only  
In the pop-up window, the Media sources not  
selected are shown as deactivated (in grey).  
available for the “Navi System Plus” model.  
b)  
Not available for the Media System Touch/Colour  
When a Media source that has already been  
played is selected again, playback is re-  
sumed from the point at which it was stop-  
ped.  
model.  
The CD and DVD drive can play audio CDs  
and DVDs and audio data CDs and DVDs.  
Note  
The Media source can be changed in the  
Track list view: select Media > View.  
Insert a CD or DVD  
Optional Media playback sources  
●
Hold the CD or DVD with the printed side  
»
facing up.  
Function button: media source  
Internal hard drive (SSD)  
a)  
JUKEBOX  
page 208.  
›››  
1)  
The DVD drive is only available for the model:  
“Navi System Plus”.  
205  
Infotainment System  
●
Push the CD or DVD into the DVD slot  
tingsmenu or press the Infotainment /  
 button and then press the Settings  
context to open the System settingsmenu.  
age devices containing supported audio files,  
such as MP3 players, iPods™ and USB sticks.  
3
Fig. 224  
to the point where it is drawn in  
›››  
automatically.  
Only supported audio files are displayed and  
played. Other files are ignored.  
●
Press the Remove safely function button. A  
Eject a CD or DVD  
●
dropdown menu appears with the following  
options: SD1 Card, SD2 Card*, USB1 and  
USB2*. After correctly ejecting the memory  
card from the system, the function button be-  
comes inactive (grey colour).  
1
Press button   
.
Instructions and restrictions  
●
The CD or DVD in the drive will be ejected  
Compatibility with Apple™ devices and other  
media players depends on the unit.  
and must be removed within approximately  
10 seconds.  
The USB port supplies the usual USB volt-  
age of 5 volts for a USB connection.  
●
Press the inserted memory card. The mem-  
ory card “jumps” to the eject position.  
●
External hard disks with a capacity greater  
than 32 GB must be reformatted for the FAT32  
file system in some circumstances. You will  
find the necessary software and information  
on the Internet.  
Remove the memory card.  
Insert or eject a memory card  
Depending on the features and the country,  
the vehicle may have one or two slots for SD  
cards.  
Unreadable memory card  
If a memory card is inserted and the data  
cannot be read, the relevant warning ap-  
pears.  
Take into account all other instructions and  
limitations regarding requirements for media  
sources.  
Inserting a memory card  
Insert the compatible memory card, bevelled  
edge first and with the label face up (con-  
External data storage device con-  
nected to the USB port  
2
tacts face down), into slot Fig. 224  
or  
›››  
Disconnecting  
9
Fig. 199 , until properly inserted.  
›››  
Any connected data storage devices must  
be prepared before their disconnection in or-  
der to remove them.  
Depending on the features and the country,  
the vehicle may have one or two USB con-  
nections page 233.  
If a memory card cannot be inserted, make  
sure it is positioned correctly and is compati-  
ble with the unit.  
›››  
●
From the main Media menu, press the  
Audio files on an external data storage device  
connected to the USB port can be played  
and controlled via the Infotainment system.  
SETTINGS button to open the Media Set-  
tingsmenu or press the Infotainment /  
 button and then press the Settings  
context to open the System settingsmenu.  
Removing a memory card  
The inserted memory cards must be pre-  
pared for removal.  
Where this manual refers to external data  
storage devices, this means USB mass stor-  
●
Press the Remove safely function button. A  
dropdown menu appears with the following  
●
From the main Media menu, press the  
SETTINGS button to open the Media Set-  
206  
Operating modes  
options: SD1 Card, SD2 Card*, USB1 and  
USB2*. After correctly ejecting the data stor-  
age device from the system, the function but-  
ton becomes inactive (grey colour).  
The connection of an external audio source is  
Starting Bluetooth® audio transfer  
indicated by AUXon the screen.  
Activate Bluetooth® visibility on the external  
●
Bluetooth® audio source (e.g., mobile tele-  
phone).  
Connecting an external audio source to  
the AUX-IN multimedia socket  
●
Now the data storage device can be dis-  
●
Lower the base volume on the Infotainment  
connected.  
●
Lower the base volume on the Infotainment  
system.  
system.  
●
In the MEDIA main menu, press the SOURCE  
Note  
●
Connect the external audio source to the  
function button and select BT audio .  
●
Do not connect an external media player  
AUX-IN multimedia socket.  
●
Press Search for new device in order to con-  
at the same time to play music via Blue-  
tooth® and via the USB port with the In-  
fotainment system, as this could cause  
playback limitations.  
●
nect an external Bluetooth® audio source for  
the first time page 228.  
Start playback on the external audio  
source.  
›››  
●
OR: Select a Bluetooth® external audio  
In the MEDIA main menu, press the SOURCE  
●
function button and select AUX .  
source from the list.  
●
If the external player is an Apple device™,  
it cannot be simultaneously connected by  
USB and by Bluetooth.  
●
Please refer to the instructions on the  
screen of the Infotainment system and on the  
Bluetooth® audio source regarding the rest of  
the procedure.  
Connecting an external audio  
source via Bluetooth®  
●
If a connected device is not recognised,  
disconnect all the connected devices and  
try connecting the device again.  
Bluetooth® Audio mode allows you to listen to  
audio files being played on a Bluetooth® au-  
dio source (e.g., a mobile telephone) connec-  
ted via Bluetooth® (audio playback by Blue-  
tooth®) over the vehicle speakers.  
You may still need to manually start playback  
on the Bluetooth® source.  
When playback on the Bluetooth® audio  
source is stopped, the Infotainment system  
remains in Bluetooth® Audio mode.  
●
Do not use memory card adaptors, USB  
extension cords or USB hubs!  
External audio source connected to  
the AUX-IN multimedia socket   
Conditions  
Controlling playback  
The Bluetooth® audio source must support  
●
Depending on the equipment and country  
there may be an AUX-IN multimedia socket.  
The extent to which the Bluetooth® audio  
source can be controlled via the Infotainment  
system depends on the connected Blue-  
tooth® audio source.  
the A2DP Bluetooth® profile.  
●
In the Bluetooth Settings menuthe  
The connected external audio source is  
played over the vehicle speakers and cannot  
be controlled via the Infotainment system  
controls.  
»
Bluetooth Audio (A2DP/AVRCP) function must  
be on. Select Phone > Settings > Blue-  
tooth  
207  
Infotainment System  
The available functions will depend on the  
Bluetooth® Audio profile that the connected  
external player supports.  
The files will only be copied when the engine  
is running. Copying copy-protected CDs and  
DVDs is prohibited  
●
If the external player is an Apple device™,  
it cannot be simultaneously connected by  
USB and by Bluetooth.  
With media players that support the AVRCP  
Bluetooth® profile, playback on the Blue-  
tooth® audio source can be automatically  
started or stopped when the unit is switched  
to Bluetooth® Audio mode or to a different au-  
dio source. In addition, it is possible to view or  
change the track via the Infotainment system.  
Importing files  
●
In Media mode, press the SETTINGS func-  
Jukebox (SSD)  
3 Only available for the model: Navi System Plus  
tion button and then select Manage jukebox .  
●
Press the IMPORT function button.  
●
Select the desired source from the Select  
sourcemenu.  
Note  
The data storage device is prepared. This op-  
eration may take a few seconds.  
●
Due to the large number of possible Blue-  
tooth® audio sources, it is not possible to  
guarantee fault-free operation of all de-  
scribed functions.  
●
Activate the checkboxes to the right of the  
files or folders to be imported.  
●
If Select all is activated, all files and folders  
●
To play music, do not link the external  
media player simultaneously to Bluetooth®  
and the USB interface of the infotainment  
system, as this can cause limitations during  
playback.  
on the data storage device will be imported.  
●
Fig. 225 Manage Jukebox  
Press the IMPORT function button.  
Depending on the selection, all files and fold-  
ers will be imported with the indicated name  
to the Jukebox.  
The “jukebox” is located on the hard drive of  
the Infotainment system (SSD1)).  
●
Do not connect an external media player  
to play music via Bluetooth® and via the  
Compressed audio files (MP3 and WMA) and  
some video files (Podcasts, AVIs, etc.) can be  
imported from different data storage devices  
to the jukeboxand this used to play them.  
USB port page 206 at the same time  
›››  
If no track information is available, the audio  
files will be placed in the following folders:  
with the Infotainment system, as this could  
cause playback limitations.  
Audio data CD  
■
Album  
1)  
Solid-State-Drive (SSD).  
208  
Operating modes  
■
Unknown albums  
Deleting files  
Jukebox  
Track.mp31)  
Playlist  
■
●
●
In Media mode, press the SETTINGS func-  
■
Artists  
tion button and then select Manage jukebox .  
●
Artist  
■
Unknown artists  
●
Press the DELETE function button.  
●
Album  
■
Unknown albums  
●
Activate the checkboxes to the right of the  
●
Music genre  
Track.mp31)  
■
files or folders to be deleted.  
●
Title  
●
If Select all is activated, all the files and  
●
Video  
Functions and progress display during the  
copying operation  
folders on the data storage device will be de-  
leted.  
●
Non-playable files (an unsupported file has  
been imported).  
While copying, an animation is displayed  
along with the progress percentage on the  
import screen.  
●
Press the DELETE function button. The  
files and folders will be deleted according to  
the selection made.  
Note  
●
If the Infotainment system cancels a  
Audio data CD: It is not possible to copy and  
play files at the same time.  
●
When the files have been deleted, a mes-  
copying operation, check the storage  
space on the internal hard drive and check  
the data storage device.  
sage will appear.  
●
Press the BACKfunction button to close  
●
Press the Cancel function button to end the  
import of the whole track that is currently be-  
ing imported.  
To obtain information on the status of the  
import, press the Information function button.  
Press the BACKfunction button to close  
the import screen with the progress informa-  
tion.  
When the file import ends, a message will  
appear.  
the menu.  
●
Due to copyright laws, before any  
change in ownership of the Infotainment  
system, all files stored on the jukebox must  
be deleted.  
Opening stored audio and video files  
●
●
Change to Jukebox(SSD) content.  
●
There are several possible reasons why  
●
When storing the tracks, they are stored un-  
der different categories and lists according to  
the information available.  
files may be shown as inactive (grey): files  
that cannot be imported (e.g. images), files  
that are already stored in the Jukebox or  
files that take up more space than availa-  
ble in the internal memory.  
●
The tracks saved can be checked and  
opened from these lists according to different  
categories.  
1)  
The name and extension of the file are exam-  
ples.  
209  
Infotainment System  
●
In the MEDIA main menu, press the SOURCE  
Connecting an external audio  
source through WLAN*  
3 Not available for model: Media System  
Touch/Colour  
DVD video mode  
3 Only available for the model: Navi System Plus  
function button and select WLAN .  
●
Please refer to the instructions on the  
screen of the Infotainment system and on the  
WLAN audio source regarding the rest of the  
procedure.  
WLAN allows wireless connection between an  
external audio source (for example a smart  
phone) and the Infotainment system.  
Controlling playback  
The extent to which the WLAN audio source  
can be controlled via the Infotainment system  
depends on the connected WLAN audio  
source and the application used.  
To use this connection, the device being con-  
nected must have an app compatible with  
the UPnP (Universal Plug and Play) communi-  
cation protocol, allowing the app to provide  
the system with the available media content.  
Fig. 226 DVD main menu.  
Note  
Conditions  
●
The Infotainment system does not pro-  
vide an internet connection, it only estab-  
lishes a wireless connection between the  
mobile device and said system.  
●
Having a compatible (UPnP) app installed  
on the mobile device.  
●
Having the Enable WLAN connectionop-  
●
Via the WLAN, only the connection be-  
tion active, which can be found in the wireless  
connection configuration.  
tween the device and the Infotainment sys-  
tem can be guaranteed, its operation de-  
pends on the application itself.  
●
Pairing the mobile device to the Infotain-  
ment system using a password generated by  
the system. The pairing must be done from  
the mobile device that you wish to connect to  
the Infotainment system.  
Fig. 227 DVD mode control menu.  
Regional code of video DVD  
Starting the WLAN audio transfer  
Quite often, the playback of DVD video is  
limited to certain regions (for example, to the  
US and Canada) by so-called region “co-  
des”. These DVDs can only be played on  
units that are coded for the same region.  
●
Lower the base volume on the Infotainment  
system.  
●
Start the UPnP app or the app for the play-  
back of the WLAN audio source.  
210  
Operating modes  
Function button: function  
The unit's DVD drive is configured to read the  
regional code for the region in which the vehi-  
cle was originally sold.  
●
You may not be able to play video DVDs  
which you have burned yourself.  
●
: Move the control menu window.  
The Infotainment system screen only dis-  
: Minimise the control menu win-  
plays the image when the vehicle is stop-  
ped. Whilst in motion, the screen discon-  
nects (the image), but the audio remains  
active.  
Starting the DVD mode  
dow.  
C
●
Insert a compatible DVD in the DVD drive.  
: Maximise the control menu win-  
dow.  
The reading of DVD data may take a few sec-  
onds.  
: Close the control menu.  
Use the arrow buttons to browse the  
DVD menu. Confirm the selection by  
pressing OK .  
The DVD's “intro” (short initial sequence) is  
played. Next, the different DVD menus are  
displayed.  
Images  
D
E
Press to open the DVD main menu.  
Controlling a DVD menu  
To move to the next or previous chap-  
ter.  
●
Briefly touch the screen to activate the  
/
   
function buttons in the DVD mode main menu  
›››  
Playback stops. The function but-  
ton changes to .  
Fig. 226.  
Function button: function  
Playback is resumed. The func-  
tion button changes to .  
SOURCE  
Display and selection of the source.  
This menu contains the Video (DVD)  
settings.  
Fig. 228 Images main menu.  
To display the control menu and re-  
turn to the main DVD screen  
SETTINGS  
DVD MENU  
Using the Images menu, image files can be  
viewed (e.g. photos) individually or as a slide-  
show.  
Fig. 227.  
›››  
Note  
A
B
Chapter display.  
●
The visual appearance of the DVD film  
menus and the menu options which it offers  
are the responsibility of the DVD manufac-  
turer.  
The image files must be stored on a compati-  
ble data storage device (e.g., a CD or an SD  
card).  
Displays play time duration and re-  
maining play time.  
●
The difference in behaviour of some films  
when using the same mode is the responsi-  
bility of the DVD manufacturer.  
●
Press the Infotainment /   
Fig. 200  
›››  
1
button and then select the Imagescon-  
»
text.  
211  
Infotainment System  
●
Navigation1)  
Press the SOURCE function button to select  
Enlarging or reducing the view  
the source where the pictures in question are  
located.  
To enlarge or reduce the view of the image  
displayed:  
Introduction  
●
Function button: function  
Stretch or reduce the image on the screen  
using 2 fingers.  
SOURCE  
Viewing and selecting the source.  
Rotating the view/image  
SELECTION Opens a list of image files.  
To rotate an image, in addition to the buttons  
provided for this (/ ), you can also press  
on the screen (e.g. with your thumb) and,  
while continuing to press with your thumb,  
slide another finger (e.g. your index finger)  
around it like a compass either clockwise (to  
rotate the image to the right) or anti-clock-  
wise (to turn the image to the left). This will ro-  
tate the image 90° with respect to its current  
position.  
The image viewed was obtained via  
GPS localisation and upon pressing  
this function button, the navigator  
menu opens to start a route to this  
destination.  
Fig. 229 Related video  
General information  
Using all the data available, the Infotainment  
system calculates the optimum route to the  
destination.  
Rotate the view of the image to the  
left or the right.  
/   
Reset the view of the image.  
The destination is defined by entering an ad-  
dress or a point of interest, e.g. a petrol sta-  
tion or hotel. Traffic reports, if any, will also be  
taken into account in the route calculation  
To stop the playback of a slideshow.  
The function button changes to  
.  
Requirements for viewing images  
(dynamic route guidance page 221).  
›››  
To continue the playback of a slide-  
show. The function button  
changes to .  
Image files  
Maximum resolu-  
tion  
Spoken instructions and visual guidance on  
the navigation unit and on the instrument  
panel will direct you to your destination.  
BMP  
JPEG  
JPG  
GIF  
4MP  
To change to the PREVIOUSor NEXT  
image.  
4MP (Progressive Mode)  
CAUTION  
/
   
The same function can be performed  
by sliding your finger horizontally  
across the screen.  
64MP  
4MP  
The navigation announcements played  
may be inaccurate (e.g. due to out-of-date  
navigation data).  
SETTINGS  
Open the Image settings menu.  
PNG  
4MP  
1)  
Valid for: Navi System and Navi System Plus.  
212  
Operating modes  
Instructions for navigation  
Updating and using navigation da-  
ta from an SD card  
Note  
●
The inserted memory card must be pre-  
When the Infotainment system is unable to re-  
ceive any data from GPS satellites (due to a  
dense tree canopy, underground car park),  
navigation can still continue using the vehicle  
sensors.  
pared before it is ejected page 206.  
›››  
3 Only available for the model: Navi System  
●
1
Press the infotainment Fig. 200  
›››  
The Infotainment system always requires the  
navigation data that is currently valid for this  
unit in order to allow all functions to be used  
in full. Using an old version may lead to errors  
during navigation.  
button and then select the Settingscon-  
text to open the System settingsmenu.  
●
Navigation is not possible without the SD  
card.  
Possible limitations in navigation  
●
Do not remove the memory card while  
the navigation data is in use. This could  
damage the memory card!  
In areas that are not or are only partially digi-  
tised on the data storage device (e.g. insuffi-  
cient definition of one-way streets and road  
categories), the Infotainment system will still  
attempt to provide route guidance.  
Updating navigation data  
The current navigation data can be downloa-  
ded in the internet at www.seat.com and stor-  
ed in a SD card compatible with the unit.  
●
The navigation memory card may not be  
used as memory for other files. The info-  
tainment system will not recognise the files  
saved.  
Suitable SD Cards can be acquired at SEAT  
dealerships.  
Navigation area and updating navigation  
data  
●
SEAT recommends only using original  
SEAT memory cards to use navigation data.  
The use of other memory cards could limit  
its operation.  
The procedure is described on the internet at  
www.seat.com.  
Roads and streets are subject to constant  
change (e.g. new roads, changes to street  
names and building numbers). Therefore, if  
the navigation data is not updated, then er-  
rors or inaccuracies may occur during guid-  
ance.  
Using navigation data  
●
Insert the memory card page 206.  
›››  
Updating and installing navigation  
data  
●
Do not remove the memory card while test-  
SEAT recommends updating navigation data  
on a regular basis. Up to date navigation data  
can be downloaded from www.seat.com or  
acquired at a SEAT dealer.  
ing. Wait for the testing icon to disappear.  
3 Only available for the model: Navi System Plus  
If the inserted memory card contains valid  
navigation data, the following message ap-  
pears: “The source contains a valid  
navigation database”. It is now possible to  
navigate with the memory card data. When  
the memory card is no longer needed by the  
hardware, it will be prepared for removal  
The Infotainment system is equipped with an  
internal navigation data memory. The re-  
quired navigation data are already installed  
on the system.  
The Infotainment system always requires the  
navigation data that is currently valid for this  
unit in order to allow all functions to be used  
page 206.  
›››  
»
213  
Infotainment System  
in full. Using an old version may lead to errors  
during navigation.  
Once installed, the memory card can be re-  
moved. The memory card must be prepared  
Navigation main menu  
for removal page 206.  
›››  
Updating navigation data  
CAUTION  
To update navigation data visit our website:  
www.seat.com.  
Do not remove the memory card while the  
navigation data is being installed. The  
memory card may be irreparably dam-  
aged!  
The navigation data must be installed after  
downloading. Navigation is not possible from  
the memory card.  
Note  
Installing navigation data  
●
The navigation memory card may not be  
The installation process takes about 2 hours.  
Fig. 230 Navigation main menu  
used as memory storage for other files. The  
Infotainment system will not recognise the  
files saved on it.  
If the Infotainment system is switched off, the  
installation process is paused and will auto-  
matically resume when switched back on.  
The Navigation main menu allows you to se-  
lect a new destination, call up a previously  
used or stored destination and search for  
points of interest.  
SEAT recommends a CLASS 101) memory  
●
card for the use of navigation data. The use  
of other memory cards could limit its oper-  
ation.  
●
Switch the ignition on.  
●
Insert the memory card containing the nav-  
Opening the main Navigation menu  
igation data page 206.  
●
›››  
●
Press the Infotainment button and then  
Press the Infotainment button and then  
select the Navigationcontext to open the  
last menu that was open in navigation.  
select the Settingscontext.  
●
In the System settingsmenu, press the  
System information function button.  
●
Function buttons and messages on the  
main Navigation menu  
Press Update software to import the stored  
navigation data.  
●
Function button: function  
Follow the instructions displayed on the  
screen.  
A
The split screen is displayed page 219.  
›››  
1)  
The speed class of an SD card.  
214  
Operating modes  
egories. When necessary, enter the name of  
the city to refine the search.  
New destination (enter destina-  
tion)  
Function button: function  
Messages and function buttons on the map  
B
display page 220.  
›››  
Fig. 231  
›››  
NEW DESTINATION : To enter a new destination  
Press to open the cursor buttons (, ),  
which allow you to move within the text.  
A
page 215.  
›››  
ROUTE : During route guidance page 217.  
›››  
Address  
MY DESTS. : To activate or manage stored destina-  
tions page 217.  
After entering a country and a town, you can  
start navigating towards the centre of the se-  
lected town.  
›››  
POI : Search for points of interest (car parks, fuel sta-  
tions and restaurants) within a particular search area  
page 218.  
›››  
When narrowing down the destination ad-  
dress, please note that every entry restricts  
the available range of subsequent selections.  
For instance, if the street you are looking for is  
not in the postcode area you have selected  
in a previous window, you will not be able to  
find the street at the street selection stage.  
Fig. 231 Search screen.  
VIEW To modify or activate or deactivate the split  
A
screen and show POI Fig. 230  
page 219.  
›››  
›››  
●
In the Navigation main menu, press the  
New destination function button.  
Press the Options function button and se-  
lect the required type of destination (Search,  
Address, POI on the routeor On map).  
SETTINGS Open the Navigation Settings  
menu.  
●
Function button: function  
●
Using voice control*, if you say Town, street  
and number, without pauses, and then the in-  
struction “Start Route Guidance” a route to  
the given destination will start.  
Country : To select the desired country.  
City : To enter the desired city or postcode.  
Street : To enter the desired street name.  
House number : To enter the desired house number.  
Junction : To select the desired intersection.  
Last destinations : Open the My destinations  
Search  
Search for addresses and Points of Interest  
using the keypad to enter them Fig. 231.  
›››  
For cities, post codes and points of interest,  
the full details must be entered. You can also  
search for points of interest by names or cat-  
menu page 217.  
›››  
»
Start : Start route guidance to the selected address.  
215  
Infotainment System  
Using the map  
After starting route guidance, the route to the  
first destination will be calculated.  
A navigation announcement informs you  
when you have reached your “destination”.  
●
Select the destination on the map or enter  
it using GPS coordinates and confirm with  
OK .  
The calculation will be performed in accord-  
ance with the data selected in the Route  
optionsmenu.  
A navigation announcement informing you  
that you have reached the “destination area”  
is given if the exact destination cannot be  
reached because it is located in a non-digi-  
tised area.  
Function button: function  
After starting route guidance, three alterna-  
tive routes will be suggested depending on  
Save : To save the selected point of interest in the  
destination memory page 217.  
›››  
the selected setup Fig. 232. These 3 routes  
During dynamic route guidance, you re-  
ceive information about reported traffic con-  
gestion on the route. An additional navigation  
announcement is given if the route is recalcu-  
lated due to traffic congestion.  
›››  
correspond to the selectable route options:  
Edit : To edit a destination or to enter another desti-  
nation.  
Economical, Fast and Short.  
Route options : To adjust route options, see Naviga-  
tion Settings > Route options.  
Route criteria: Meaning  
During a navigation announcement, you can  
Blue route: Economical route, the route is calculated  
Start : Starts guided navigation to the selected point  
of interest.  
by taking into consideration economic factors.  
change its volume using the button  
3
Fig. 200  
.
›››  
Red route: Fastest route to the destination, even if it  
is necessary to make a deviation.  
For other adjustments to the navigation rec-  
ommendations, select Navigation > Set-  
tings > Navigation announcements  
settings.  
Orange route: Shortest route to the destination,  
even if it results in longer travelling time. The route  
may have unconventional sections such as secon-  
dary roads.  
After starting route guidance  
Note  
●
Select the desired route by pressing it.  
●
If you miss a turning during route guid-  
ance and are currently unable to turn back,  
keep on driving until the navigation system  
offers a new route.  
Once the route has been calculated, the sys-  
tem gives the first navigation announcement.  
Up to 3 navigation announcements are given  
before a turn.  
●
The quality of the navigation recommen-  
dations given by the Infotainment system  
depends on the navigation data available  
and any reported traffic problems.  
●
Press the right thumbwheel of the multi-  
function steering wheel to listen to the last  
navigation instruction.  
Fig. 232 Route calculation.  
216  
Operating modes  
●
Press the My destinations. function button in  
If you have not stored any routes or want to  
create a new route, press the New route func-  
tion button and then follow the instructions as  
for a new destination, before pressing Store .  
Route  
the main Navigation menu.  
●
In the Navigation main menu, press the Route  
function button.  
Select the desired function button.  
Store position , Routes , Destinations ,  
Last destinations or Home address .  
Pressing on a stored route brings up the fol-  
lowing function buttons:  
The Route function button is only displayed  
with route guidance activated.  
Store position  
Function button: function  
Delete : To delete a stored route.  
Edit : To edit and store a route.  
Start : To start route guidance.  
Function button: function  
●
By pressing the Store position function but-  
ton, the vehicle's current position is stored as  
a Flagged destinationin the destination  
memory.  
Stop route guidance : Aborts current route guidance.  
Enter destination : To enter a new destination or a new  
stopover page 215.  
›››  
●
Mark the Flagged destinationin the  
destination memory.  
●
Congestion ahead : To exclude a section (of 0.2 to 10  
km in length) from the current route, e.g. to avoid  
congestion. To cancel the exclusion, press the Route  
function button and then Cancel congestion .  
Press the Store function button.  
Function buttons and indications in the New  
routeor Edit routemenu  
The name can be changed in the following  
input window. Press the function button to  
store the destination.  
Change route a): The map of the calculated route ap-  
pears and by holding a finger on the route and drag-  
ging the finger across said map, the route is changed  
to the road(s) that you want and the new route is then  
recalculated.  
Function button or message: function or meaning  
Stopover.  
Routes  
Destination.  
In the Routemode, you can define various  
destinations (final destination and stopovers).  
Estimated time of arrival at destina-  
tion.  
Route details : View route information for current route.  
...  
a)  
Only available for the model: Navi System Plus  
The starting point of a route is always the  
current vehicle position determined by the In-  
fotainment system. The destination is the  
end point of a route. Stopover destinations  
are driven to before the destination.  
Calculated distance to destination.  
Travelling time.  
...  
...  
My destinations (destination mem-  
ory)  
Distance to the next stopover.  
...  
●
In the Navigation main menu, press the  
The stored destinations can be selected from  
the My destinationsmenu.  
Press on the destination to display the function  
buttons.  
My Destinations. function button.  
●
Press the Routes function button. The  
»
Delete destination.  
routes stored previously will appear.  
217  
Infotainment System  
My destinations  
To start guidance direct to the selec-  
ted destination. Destinations that  
come before the selected destination  
are ignored.  
Assigning the home address for the first time:  
●
Press the Options function button and se-  
Position : Press to store the vehicle's current position  
as the home address.  
lect the desired function button.  
Address : Press to enter the home address manually.  
To open the detailed view of the desti-  
nation in question.  
Function button: function  
Editing the home address:  
Destination memory : View of destinations stored man-  
Available function buttons.  
The home address can be edited in the Naviga-  
tion settings > Manage memorymenu.  
ually and from imported vCards page 222, Im-  
›››  
porting vCards (electronic business cards).  
New dest.  
To add a new destination to the tour.  
Favourites : View of destinations stored as favourites.  
Destina-  
tions  
To add a new destination from My  
destinationsto the tour.  
Contacts : View of entries in the phonebook that have  
a stored address (postal address).  
Points of interest (POI)  
Storing  
To store the created tour in the tour  
memory.  
Home address  
Start  
To start route guidance.  
Only one address or position can be stored  
as the home address at any one time. The  
stored home address can be edited or over-  
written.  
Calculate To update calculated distance and es-  
timated arrival time.a)  
Stop  
To stop route guidance to the active  
destination.b)  
If a home address has already been stored,  
route guidance will be started to the stored  
home address.  
To move a stopover or a destination to  
another position on the list. Press and  
drag to move the destination.  
If a home address has not yet been stored, an  
address can be assigned as the home ad-  
dress.  
Fig. 233 Points of interest on the map.  
a)  
This function button is only displayed with route  
guidance activated and when a destination has been  
added to the tour.  
The points of interest saved in the navigation  
data memory are divided into different point  
of interest categories. Each point of interest  
category is assigned a symbol for display on  
the map.  
b)  
This function button is only displayed with route  
guidance activated.  
Last destinations  
If a database of points of interest has been  
imported into the Infotainment system,  
View of destinations for which a route has al-  
ready been started.  
218  
Operating modes  
Function button: function  
page 222, Importing Personal POI the  
›››  
Split screen  
category Personal POI is also shown.  
Map display in two dimensions (con-  
ventional).  
In the Map settingsmenu, the categories of  
points of interest to display on the map can  
be configured. Up to 10 categories of points  
of interest can be selected.  
2D  
Map display in three dimensions (bird's  
eye view).  
Buildings are also displayed in three  
dimensions. The places of interest and  
well-known buildings are shown in de-  
tail and in colour.  
3D  
Selecting a point of interest on the map  
Function button: function  
There are several points of interest in the area.  
a)  
To display the destination on the map.  
1
Press this symbol to open a list of points of in-  
terest.  
Fig. 234 Split screen displayed.  
a)  
To display the route on the map.  
The only point of interest in this zone. Press the  
symbol to open the detailed view of the point of  
interest.  
A
The split screen Fig. 234  
may display  
›››  
Auto /  
To change between day and night for-  
2
any of the information described below:  
Day / Night mat.  
●
Press on the name of the split screen to se-  
Press to display the split screen  
page 219.  
Split screen  
POI  
Quick POI search  
lect a display option.  
›››  
In the Navigation main menu, press the POI  
function button and the three main catego-  
ries will appear. Alternatively, enter the name  
of the point of interest to be searched using  
the new destination keypad, or press  
Display points of interest on the map.  
Function button: function  
a)  
This function button is only displayed with route  
guidance activated.  
Audio : Indicates the selected audio source.  
Compass : Displays a compass with the current trav-  
elling direction and indicates the current position of  
the vehicle (street name).  
Search nearby on the map table on  
›››  
page 220.  
Manoeuvre : Displays a list of the next manoeuvres,  
POIs or TMCs on the route and pressing them brings  
up additional information  
View  
Most frequent routes a): Information on the user's most  
frequent routes.  
»
In the Navigation main menu, press the View  
function button.  
219  
Infotainment System  
Function button: function  
Function button: function  
Function button: function  
Position : current vehicle position in coordinates and  
GPS status (satellite reception).  
Demo mode start (only when demo mode is active)  
To centre the destination on the map. This  
function button is only displayed if either  
Display destination on map or Display  
route on the map is selected  
a)  
This function button is only shown when route guid-  
ance is not active or when predictive route guidance  
is active.  
page 219.  
›››  
Map display  
To change the orientation of the map  
(north-facing or direction of travel). This  
function is only available in 2D mode.  
Press the function button to close the split  
screen.  
At any moment during navigation, pressing  
inside the map will make a pop-up menu ap-  
pear with the following functions:  
View map scale. Turn the setup button or  
move your fingers together/apart on the  
touchscreen to change the scale of the  
map.  
Function button: function  
To select automatic scaling. If the func-  
tion is active, the symbol is displayed in  
blue.  
Street name or coordinates : shows the details of the  
point selected on the map.  
Briefly zooms in on the map. After a few  
seconds, it automatically returns to the  
last selected scale.  
Fig. 235 Messages and function buttons on  
Only when you press on an icon on the map:  
the map display.  
POI : name of the point of interest (when only one  
appears on the map).  
Function buttons and messages on the  
map display.  
It can mute or repeat the last announce-  
ment, or can change the announcement  
volume.  
Group of POIs : more points of interest (when you  
press on the map on various POIs grouped to-  
gether).  
To activate function buttons and , press  
function button .  
Road signs: Depending on the vehicle's equip-  
ment, the road signs stored in the navigation data are  
displayed. Select Navigation > Settings >  
Map > Show road signs.  
Favourite : name of the favourite.  
Home : Home address.  
Function button: function  
Current altitude indicator.  
Start route guidance : starts guidance directly.  
To centre the vehicle position on the map.  
Add stopover destination : only when you have an ac-  
tive route.  
Search nearby : enters in the search menu, but only  
for the area around the point selected on the map.  
220  
Operating modes  
If during route guidance a traffic report is re-  
ceived that affects the route being travelled,  
an alternative route will be searched for if the  
Infotainment system calculates that time can  
be saved.  
Traffic reports and dynamic route  
guidance to the destination (TRAF-  
FIC)  
Predictive navigation  
Traffic reports on map (selection)  
Symbol: Meaning  
: Slow traffic  
: Traffic jam  
Fig. 237 Predictive navigation  
: Accident  
When you activate Predictive navigation, the  
system detects and stores in the background  
routes that are frequently followed, without  
them being active destination routes. This  
function has no navigation announcements  
unless the user requires them by pressing the  
right thumbwheel of the multifunction steer-  
ing wheel.  
Fig. 236 Traffic reports  
: Slippery road surface (ice or snow)  
: Slippery road surface  
: Danger  
The Infotainment system constantly receives  
traffic reports (TMC/TMCpro) in the back-  
ground, provided a TMC traffic news station  
can be received at the current location. The  
station being listened to does not have to be  
the traffic news station.  
: Road works  
●
On the main screen of the Navigation menu,  
List of available traffic reports  
: Strong wind  
in the pop-up window, press the  
Frequent routes button. To display frequently  
followed routes press the Show on map button  
●
Press the Infotainment button and then  
: Road closed to traffic  
select the Trafficcontext.  
Fig. 237.  
›››  
During route guidance, traffic congestion that  
does not affect the route calculated is dis-  
played in grey.  
Dynamic route guidance  
In order for dynamic route guidance to func-  
tion, Dynamic routemust be activated in the  
route options.  
221  
Infotainment System  
Importing vCards (electronic busi-  
ness cards)  
Importing Personal POI  
Navigation with images  
Importing the Personal POI to a points of  
interest destination memory  
Importing vCards to the destination mem-  
ory  
●
Insert the data storage device with the stor-  
ed Personal POI or connect it to the Infotain-  
●
Insert the data storage device with the stor-  
ment system page 203.  
›››  
ed vCards or connect it to the Infotainment  
system page 203.  
●
›››  
Press the Infotainment button and then  
select the Settingscontext.  
●
Press the SETTINGS function button in the  
main Navigation menu.  
●
In the Settingsmenu, press the  
Manage memory function button.  
Press Update my POIs and then press  
Update and Next to import the Personal  
POIs.  
●
In the Navigation settingsmenu, press  
the Import destinations function button.  
Select the data carrier with the vCards  
saved in the list.  
Press Import all vCards from this folder .  
Confirm the import notice with the OK  
function button.  
●
Fig. 238 Images main menu.  
●
Selecting an image and starting route  
guidance  
●
Confirm the import notification with the OK  
function button.  
●
Bear in mind the requirements and formats of  
the compatible images.  
●
The stored Personal POI are now in the points  
●
of interest destination memory page 218  
›››  
Insert the data storage device with the stor-  
ed images or connect it to the Infotainment  
system.  
Press the Infotainment button and then  
select the Imagescontext.  
The saved vCards will now be in the destina-  
and can be used for navigation purposes.  
tion memory page 217 and may be used  
›››  
The stored Personal POI can be deleted in  
the Navigation Settingsmenu.  
for navigation.  
●
Note  
●
Press the SOURCE  
Fig. 238 function but-  
›››  
Only one address per vCard can be impor-  
ted. In the event any vCards have multiple  
addresses, only the main address will be  
imported.  
ton and select the data storage device where  
the images are stored.  
●
Select the desired image.  
●
If the image displayed was taken using GPS  
localisation, the function button will appear.  
Press to start guidance to a destination.  
222  
Operating modes  
Offroad* navigation is not suitable for driving  
on conventional roads as it does not detect  
one-way streets, motorway entries or similar.  
Function buttons in the Offroad Navigation  
menu  
Route guidance in Demo mode  
If demo mode is activated in the Navigation  
Settingsmenu, an additional pop-up win-  
dow opens when you start route guidance.  
Function button: function  
RECORD : Initiates the plotting of an Offroad tour.  
Offroad Navigation Menu  
●
MEMORY : Opens a list allowing the selection of a  
stored Offroad tour.  
Pressing the Demo mode function button  
starts a “virtual route guidance” to the desti-  
nation you have entered.  
EXIT : Ends Offroad navigation.  
●
If you press the Normal function button, a  
“real route guidance” starts.  
Recording an Offroad tour  
Navigation in Offroad  
mode*1)  
Fig. 239 Offroad Navigation Menu start  
Introduction  
Press the SETTINGS function button in the  
Offroad* navigation is a function for offroad  
driving that provides directions in “non-digi-  
tised areas” at low speeds.  
main Navigation menu.  
●
In the menu, press the Waypoint mode  
Non-digitised areas are areas about which  
the system does not have information for the  
streets or terrain. It does not detect streets,  
buildings or natural limits such as mountains  
or rivers, although they may be shown on the  
map.  
function button.  
Fig. 240 Recording an Offroad tour  
●
The Offroad Navigation menu opens  
Fig. 239.  
›››  
An Offroad tour is formed by a series of stor-  
ed waypoints.  
»
1)  
Only available for the model: Navi System Plus  
223  
Infotainment System  
Starting recording  
Loading an Offroad tour  
Managing stored Offroad tours  
●
In the Offroad Navigation menu, in the pop-  
When the Offroad tour is selected, press Play  
and the selected tour will be loaded onto  
the Navigation system.  
up window press the RECORD pop-up button.  
●
In the pop-up window, the user is able to  
plot the tour with a given destination or start  
plotting the route without giving a final desti-  
nation.  
Creating an Offroad tour  
●
Starts plotting the route.  
The offroad markers can be recorded by in-  
dicating a manual waypoint.  
●
In the Offroad Navigation menu, press the  
Fig. 241 Offroad Navigation menu, stored  
tours  
ADD WAYPOINT function button. The tour way-  
points defined manually are shown on the  
map by a marker.  
●
Press the MEMORY function button in the  
Offroad Navigation menu.  
●
Ending recording  
A list of stored Offroad tours opens, if there  
are any.  
●
Press the STOP RECORDING function button  
Fig. 242 Offroad route guidance mode  
in the main Offroad Navigation menu.  
When a tour is selected, the following icons  
will appear Fig. 241:  
Start route guidance  
›››  
●
Loads the stored Offroad tour.  
Export the tour to an SD card.  
Edit the name of the tour.  
Delete the tour.  
●
Starting off in a stored route is not detected  
by the system automatically.  
Setup  
Load tour  
Function button: function  
Function button: function  
Invert : Reverses the direction of the stored Offroad  
tour.  
IMPORT : allows the import of an Offroad route in  
“.GPX” format.  
Next point : Starts the Offroad tour from the nearest  
point.  
224  
Operating modes  
–
–
Classic Display: the entire lengths of  
the revolutions per minute and speed-  
ometer needles are shown.  
Function button: function  
Vehicle Menu  
Start : Starts the complete Offroad tour.  
Introduction to using the Vehicle  
menu  
Views 1, 2, 3: customise the information  
that appears in the digital cockpit. Only  
2 of these items of information can be  
displayed at the same time, but the user  
chooses which to display, and in what  
order, by moving the finger vertically  
over the dials. Depending on the version,  
the Views can be memorised by existing  
the menu or keeping the View button  
pressed.  
When route guidance starts, the system  
switches to the map view.  
Press the Infotainment /  button and  
then select the Vehiclecontext to access  
the main menu with the following options:  
Stopping route guidance  
●
Press the Options button on the screen and  
then press Stop .  
●
VIEW  
●
MINIPLAYER, in the top right corner (Radio  
End waypoint navigation  
or Media function if the HDC descent con-  
trol* is not active).  
●
Press the EXIT function button in the Off-  
road Navigation menu.  
●
PREVIOUS-NEXT (to change screen)  
Sport*  
●
SETTINGS  
››› page 35  
WARNING  
If the corresponding equipment is available,  
the information that appears in the Sport op-  
tion is the following:  
Terrain features are disregarded during  
route guidance Drive slowly and following  
the instructions in order to perform the ma-  
noeuvre as far as possible!  
With the function button VIEW you can ac-  
cess the following information:  
1. Instantaneous power expressed in kW  
2. G forces  
3. Turbo pressure, expressed in bar (“bar”),  
kilopascals (“kPa”) or in pounds per  
square inch (“psi”). Press the Setup but-  
ton to change the units of pressure.  
Instrument panel  
●
The general direction of travel is indica-  
Press the Instrument Panel button to choose  
from the various display options and custom-  
ise the information that appears in the Digital  
ted straight ahead by direction arrows in  
the Infotainment System pop-up window  
›››  
A
Fig. 242  
.
Cockpit page 104:  
›››  
–
Automatic Display: default information  
depending on the selected Driving  
Mode.  
Note  
4. Coolant temperature  
5. Oil temperature  
»
If an Offroad tour is being recorded, this is  
automatically stored if Offroad navigation  
is discontinued.  
225  
Infotainment System  
Only 3 of these items of information can be  
displayed at the same time, but the user  
chooses which to display, and in what order,  
by moving the finger vertically over the dials.  
sumption devices is obtained. It is shown via a  
consumption indicator bar in l/h (gal/h)2).  
Telephone  
General information  
Driving data  
The onboard computer is equipped with 3  
memories that work automatically. In these  
memories you can see the distance travelled,  
average speed, time passed, average con-  
sumption and autonomy of the vehicle.  
Press the Next button to display the Lap  
timer menu1).  
Offroad*  
If the corresponding equipment is available,  
the information that appears is the following:  
Fig. 243 Related video  
Ecotrainer*  
1. Compass.  
If the corresponding equipment is available,  
the ECOTRAINER will provide information on  
driving style. The information on driving style  
is only evaluated and displayed when moving  
forward.  
The Telephone functions described below  
can be used through the Infotainment system  
if there is a mobile telephone connected to it  
2. Altimeter: altitude above sea level.  
3. Turning angle of steered wheels.  
4. Coolant temperature.  
via Bluetooth® page 228.  
›››  
In order for the mobile telephone to be able  
to connect to the Infotainment system the tel-  
ephone must be equipped with Bluetooth®.  
5. Lubricating oil temperature  
Vehicle status  
Only the altimeter and 2 more of these items  
of information can be displayed at the same  
time, but the user chooses which to display,  
and in what order, by moving their finger ver-  
tically over the dials.  
Press the Vehicle status button to access infor-  
mation on the Vehicle statusmessages  
and Start-Stop system. The Vehicle status  
messages are displayed, in addition to being  
specified on the corresponding button.  
If there is no mobile telephone connected to  
the Infotainment system, the telephone man-  
agement system will not be available.  
The instructions shown on the screen for the  
telephone menus will depend on the mobile  
telephone used. There may be variations.  
Consumers  
By pressing the CONSUMERS button, informa-  
tion on the status of the vehicle's main con-  
1)  
This lap timer is independent of the one that  
appears on the instrument panel.  
2)  
In the case of Gas (CNG) vehicles, the units are  
in kg/h.  
226  
Operating modes  
Only use compatible Bluetooth® devices. For  
further information on compatible Bluetooth®  
products, ask your nearest SEAT dealer or  
check on the internet.  
●
In areas of little or no coverage or, in  
affect the audio quality of a telephone con-  
versation in the vehicle.  
some cases, in a tunnel, garage or under-  
pass, your call may be cut off and you may  
not be able to make even emergency calls.  
Note  
Use the instruction manual of the mobile tele-  
phone and of any accessories.  
●
Restrictions on the use of devices using  
WARNING  
Bluetooth® technology may apply in some  
countries. For further information, contact  
the local authorities.  
If a mobile telephone is not secured or is in-  
correctly secured in the vehicle, it could  
move around the passenger compartment  
in the event of a sudden driving manoeuvre  
or emergency stop, resulting in injury.  
If you detect any operating issues between  
your mobile telephone and the Infotainment  
system, restart your mobile by switching it off  
and on again.  
●
If you wish to connect a device to the tel-  
ephone management system via Blue-  
tooth® technology, consult the safety  
warnings in its instruction manual. Only use  
compatible Bluetooth® devices.  
Some functions and setup can only be per-  
formed when the vehicle is stopped and are  
not available on all mobile telephones.  
●
While the vehicle is in motion, always se-  
cure the mobile telephone properly outside  
the airbag deployment zone.  
WARNING  
WARNING  
Mobile telephones may interfere with and  
alter the correct operation of pacemakers  
if they are carried directly over them.  
Places with special regulations  
General, mandatory, legal and country-  
specific instructions and laws for the use of  
mobile phones inside the vehicle must al-  
ways be considered.  
Switch off the mobile telephone and the mo-  
bile’s Bluetooth® function in places with a risk  
of explosion. In the majority of cases, these  
places are signposted, but not always clearly  
●
Maintain a minimum distance of at least  
20 centimetres between the aerials of the  
mobile telephone and the pacemaker.  
WARNING  
in General information on page 227.  
›››  
They include, for example:  
Speaking by telephone and using the mo-  
bile telephone management system whilst  
driving can distract you from the road and  
cause an accident.  
●
Do not carry your switched-on mobile  
telephone in your breast pocket directly  
over the pacemaker.  
●
the vicinity of chemical pipelines and tanks  
The lower decks of boats and ferries.  
In the proximity of vehicles that run on liquid  
gas (such as propane or butane).  
●
●
If you suspect interference, switch off the  
mobile telephone immediately.  
●
●
Always drive carefully and responsibly.  
●
Select volume settings that allow you to  
easily hear signals from outside the vehicle  
at all times (e.g. emergency services sirens  
and horns).  
●
places where the air is laden with chemi-  
CAUTION  
cals or particles such as flour, dust or metal  
powder.  
High speeds, poor weather or road condi-  
tions and the quality of reception can all  
»
227  
Infotainment System  
●
●
all other places where the vehicle engine  
mobile telephone with Bluetooth® technolo-  
gy, it is first necessary to pair them.  
Phone book access profile (PBAP):  
must be switched off.  
Serves to download phone book contacts  
from the mobile telephone to the Infotainment  
system.  
Some Bluetooth® mobile telephones detect  
and automatically connect when turning on  
the ignition if a connection has been previ-  
ously established. For this to take place the  
telephone must be switched on and its Blue-  
tooth® function activated, and there must be  
no active Bluetooth® connection with other  
devices.  
WARNING  
Message profile (MAP):1) Serves the  
●
Switch off the mobile phone in areas with a  
risk of explosion! The mobile telephone can  
automatically connect to the mobile tele-  
phone network again if it loses the Blue-  
tooth® connection to the telephone man-  
agement system.  
download and synchronise short messages  
(SMS) of the mobile telephone to the Infotain-  
ment system.  
Note  
To prevent them from being heard through  
the speakers, the button and mobile tele-  
phone alert tones must be disconnected.  
Where necessary, disconnect the headset  
from the mobile telephone you wish to con-  
nect to the system.  
Bluetooth® connections are free.  
CAUTION  
Bluetooth® is a registered trademark of Blue-  
In areas where special regulations apply or  
the use of mobile telephones is prohibited,  
both the telephone and the telephone  
management system must be switched off.  
The radiation produced by the mobile tele-  
phone when switched on may interfere with  
sensitive technical and medical equipment,  
possibly resulting in a malfunction or dam-  
age to the equipment.  
tooth® SIG, Inc.  
Bluetooth profiles®  
When a mobile phone is connected to the tel-  
ephone management system, a data ex-  
change takes place via one of the Bluetooth®  
profiles.  
Pairing and connecting a mobile  
telephone to the Infotainment sys-  
tem  
●
Hands-Free Profile (HFP): When connect-  
ing a mobile telephone to the phone manag-  
er through the HFP the calls can be managed  
via the Infotainment system.  
In order to manage a mobile telephone via  
the Infotainment system, it is necessary to  
pair both devices once.  
Bluetooth®  
Bluetooth® technology allows a mobile tele-  
phone to be connected to your vehicle's tele-  
phone management system. In order to use  
the telephone management system with a  
●
Audio profile (A2DP): This profile makes it  
For your safety, we recommend you make the  
link when the vehicle is stationary. In some  
countries it is not possible to perform the pair-  
ing with the vehicle running.  
easier to transmit audio to the infotainment  
system with stereo quality. This function may  
require connecting additional profiles for  
managing and controlling audio playback.  
1)  
Not available for the Media System Touch/Col-  
our model.  
228  
Operating modes  
●
Conditions  
Press the Infotainment /  button and  
shown on the mobile telephone. If they  
then select the Telephonecontext.  
●
match, confirm on both devices.  
You must guarantee the following setup in the  
mobile phone and the Infotainment system:  
Press the Settings  
Results button.  
>
Bluetooth  
>
Find devices  
When the pairing has been finalized correct-  
ly, the Telephone main menu will appear. The  
phone book, call list and SMS messages stor-  
ed in the mobile phone will be loaded once  
the requests have been accepted in the mo-  
bile phone. After downloading, the data will  
be available on the Infotainment system.  
>
●
The ignition must be switched on.  
The name of the Bluetooth® function of your  
Infotainment system will be displayed on the  
main Telephone screen and you can edit this  
name via the Bluetooth settings menu  
The Bluetooth® function of the mobile tel-  
●
ephone and the Infotainment system must be  
active as well as visibility.  
●
The keypad lock on the mobile telephone  
The search process can take up to 1 minute.  
On the screen the system will dynamically  
update the names of the Bluetooth devices  
found.  
must be deactivated.  
Pairing and connection of mobile tele-  
phones  
Follow instructions in the manual for the mo-  
bile telephone.  
You can pair up to 20 mobile telephones to  
the Infotainment system, but the number of si-  
multaneous connections varies:  
During the pairing process, it is necessary to  
enter data via the mobile telephone's keypad.  
As soon as the search is completed, the  
names of the Bluetooth® devices found are  
displayed on-screen.  
●
Media System Touch / Colour: a phone  
Pairing a mobile telephone  
Select the Bluetooth® device you want to  
●
connected to the hands-free profile and the  
same or a different device connected to the  
Bluetooth® audio profile.  
®
●
Make sure the mobile device's Bluetooth  
connect on the infotainment system. In cer-  
tain circumstances, it is possible that to finish  
the connection between the two devices, you  
must enter additional data in the mobile tele-  
phone and Infotainment system.  
function is activated and visible.  
●
Press the Infotainment /  button and  
then select the Telephonecontext.  
●
Media System Plus / Navi System: two mo-  
bile phones simultaneously connected to the  
hands-free profile and one of them is also  
connected Bluetooth® audio profile.  
●
Press the Find telephone  
>
Results function  
button.  
●
Use your mobile telephone to enter and  
confirm your PIN code, as indicated in the dis-  
play of the infotainment system.  
●
Navi System Plus: two mobile phones simul-  
OR:  
taneously connected to the hands-free pro-  
file and one of them or a third one connected  
to the Bluetooth® audio profile.  
If more Bluetooth® profile pairing requests  
●
●
Press the Infotainment /  button and  
then select the Telephonecontext.  
are received on the mobile telephone, make  
sure to reply to them.  
●
Press the function button Setup  
>
When the Infotainment system is switched on,  
it automatically connects to the last connec-  
ted mobile telephone. If it is not possible to  
connect to this mobile telephone, the  
Select mobile phone  
>
Results .  
OR:  
●
Compare the PIN code shown on the dis-  
OR:  
»
play of the Infotainment system with that  
229  
Infotainment System  
Telephone main menu  
telephone management system will try to au-  
tomatically connect to the next mobile tele-  
phone on the list of paired devices.  
The maximum range of the Bluetooth® con-  
nection is approx. 10 meters. The active  
Bluetooth® connection disconnects if this dis-  
tance is exceeded. The connection is auto-  
matically re-established as soon as the de-  
vice is once again within Bluetooth® range.  
ated from the User profile settings  
menu.  
Telephone management can store a maxi-  
mum of 4 user profiles for mobile telephones.  
If you wish to link/connect another mobile  
phone, the oldest user profile will automati-  
cally be replaced.  
Telephone management system function  
buttons  
WARNING  
●
Press the infotainment button /  and  
Do not perform the pairing and connection  
process while driving. This may cause an  
accident!  
then select the Telephonecontext to open  
the Telephone main menu.  
Fig. 244 Telephone main menu (view of the 8"  
screen).  
Function button: function  
Assign a user profile  
Note  
The data from the phonebook, the call lists  
and the stored speed dial buttons are as-  
signed to a user profile and remain stored on  
the telephone management system. This in-  
formation will be available every time the mo-  
bile telephone is connected to the telephone  
management system.  
Name of connected mobile tele-  
●
phone. Press the icon to the left to  
It may be necessary to confirm the phone  
book data and SMS transfer request on the  
mobile telephone.  
1
connect or pair with another mobile  
telephone.  
●
Check that there are no requests pend-  
Speed dial buttons, to which tele-  
2
3
phone numbers from the phonebook  
may be assigned respectively.  
ing acceptance in your mobile phone. If  
there are, this could block some of the  
functions in the Telephone menu.  
To change to another telephone con-  
nected to the hands-free profile. This  
button will only be visible when there  
are two telephones connected as  
hands-free. The active user profile  
corresponds to the telephone ap-  
pearing on the screen.  
After the first connection, it will take a few mi-  
nutes for the data from the phonebook of the  
linked mobile phone to be available in the In-  
fotainment system. The next time that the  
mobile telephone is connected (e.g. on the  
next journey) the phonebook is updated au-  
tomatically.  
DIAL NUM- To open the number pad and enter a  
BER  
telephone number page 231.  
›››  
If any entries in the mobile phonebook have  
been modified while connected, a manual  
update of the phonebook data can be initi-  
230  
Operating modes  
Enter telephone number menu  
Function button: function  
Display: Meaning Fig. 245  
›››  
To open the phonebook of the con-  
Name of the mobile network operator (pro-  
CONTACTS  
SMSa)  
A
nected mobile telephone.  
vider) to which the mobile telephone is con-  
nected.  
To open the menu for SMS messages.  
View of stored telephone number or name. If  
the name stored in the phonebook has an  
assigned photo, it can be displayed: select  
Telephone > Settings > User  
profile > Show pictures for  
contacts*.  
To open call lists of the connected  
CALLS  
mobile telephone page 232.  
›››  
B
To open the Telephone set-  
tingsmenu.  
SETTINGS  
a)  
Not available for the Media System Touch/Colour  
model.  
Press to accept a call.  
Fig. 246 Enter telephone number menu.  
Press to end a call.  
OR: Press to reject an incoming call.  
Open the Enter telephone number menu  
Display and symbols of the tele-  
phone management system  
Press the DIAL NUMBER function button from  
the PHONE main menu.  
Press to mute or to reactivate the ring tone  
during an incoming call.  
Press to mute the microphone during an ac-  
tive call and to reactivate it.  
Possible functions  
Entering a phone number with  
This button keeps the call active. While the  
call is on hold the listener will not hear the  
conversation. To reactivate it, press the call  
accept button . To reject it, press the reject  
button .  
the keypad.  
Enter telephone  
number  
Press the function button to  
make a call.  
Enter the first letters of the con-  
tact to find using the keypad.  
Press to add a participant to the active call.  
Select a con-  
tact from the  
list  
The available entries appear in  
the phonebook.  
Charge status of a mobile telephone con-  
nected via “Hands-free profile” (HFP) Blue-  
Fig. 245 Active call.  
tooth®  
.
Select the desired contact from  
the phonebook to make the call.  
»
Strength of coverage signal received by the  
mobile telephone.  
231  
Infotainment System  
ple, if the vehicle and the operator of the  
connected mobile telephone are in differ-  
ent countries. If you are not able to use  
these services contact an authorised SEAT  
workshop.  
Possible functions  
To enter a country code, instead  
of the first two digits (interna-  
tional access code e.g. “00”)  
you can enter the character “+”.  
Enter the coun-  
try code  
Press the function button  
0
for  
approx. 2 seconds to add the +.  
Call Menu (call lists)  
Breakdown  
Press the function button to ob-  
tain help in the event of break-  
down. For this the network of  
SEAT dealerships is available to  
you with their Mobility Service.  
service call  
Possible displays in the Calls menu  
Display: Meaning  
Missed calls : Displays the numbers of missed  
Information call Press the function button to ob-  
and unanswered calls.  
tain information on the SEAT  
brand and the additional serv-  
ices contracted related to traffic  
and travel.  
Dialled numbers : Indicates the numbers dialled  
on the mobile telephone and on the Infotain-  
ment system telephone management system.  
Press the Voice mail function  
Received calls : Indicates the numbers of the  
calls received on the mobile telephone and on  
the Infotainment system telephone manage-  
ment system.  
button to make the call.  
OR: Press the function button  
for about 2 seconds to make a  
call.  
Call mailbox  
Note  
If the number for the mailbox has  
not yet been stored, enter it and  
confirm with OK .  
The availability of the call lists will depend  
on the mobile phone used.  
Note  
●
Breakdown service and information calls  
can incur an additional cost on your tele-  
phone bill.  
●
The Roadside Assistance and Information  
services might not work properly, for exam-  
232  
Operating modes  
Depending on the special characteristics and  
the country, the vehicle may have a  
USB/AUX-IN port.  
Multimedia  
USB/AUX-IN*Port  
The USB/AUX-IN port can be found in the  
storage compartment area of the centre  
console Fig. 247.  
›››  
The operating description is located in  
page 203.  
›››  
Depending on the equipment and the coun-  
try, the vehicle may also have USB connec-  
tions exclusively for charging or as a power  
socket.  
Fig. 250 Centre console: slot for mobile phone  
connection.  
The Connectivity Box includes different func-  
tions that will help to use your mobile device.  
These USB ports are located at the rear of  
the console, between the front seats  
Fig. 247 Centre console: USB/AUX-IN input.  
They are the “Wireless Charger” and the  
“Mobile Signal Amplifier”.  
Fig. 248.  
›››  
The Wireless Charger only features the  
“Wireless Charger” function.  
Connectivity Box* / Wireless  
Charger*  
“Wireless Charger”  
The “Wireless Charger” allows mobile devi-  
ces with Qi1) technology to be charged with-  
out a cable.  
To charge your mobile phone wirelessly:  
Fig. 248 Centre console, rear section: USB  
●
Place your mobile device with Qi technolo-  
Fig. 249 Related video  
connectors.  
gy1 ) in the middle of the pad with the screen  
facing up Fig. 250.  
»
›››  
1)  
Qi technology allows you to charge your mo-  
bile phone wirelessly.  
233  
Infotainment System  
When you do so, make sure there are no ob-  
jects between the pad and the mobile phone.  
ature of your device before you pick it up,  
and take care when removing it.  
The mobile phone will start charging auto-  
matically. For further information about  
whether your mobile device uses Qi technol-  
ogy, please check your mobile phone's user  
manual or visit the SEAT website.  
Note  
●
Your mobile device must support the Qi  
wireless inductive charging interface  
standard for proper operation.  
●
If your mobile phone has a cover or a pro-  
“Mobile Signal Amplifier”  
tective casing, this may affect the Connec-  
tivity Box functions.  
The “Mobile Signal Amplifier” allows you to  
reduce the radiation in your vehicle and enjoy  
better reception.  
●
There must be no metallic objects be-  
tween the pad and the mobile device that  
might affect the wireless charging or the  
connection with the external aerial.  
For safety reasons, it is recommended that  
you pair the radio and the mobile device us-  
ing Bluetooth® and place the mobile phone  
on the Connectivity Box pad, so as to have  
better reception without having to handle the  
mobile phone.  
●
The charging time and the temperature  
vary in accordance with the device used.  
●
To avoid malfunction, ensure that the mo-  
bile phone is correctly placed on the pad.  
●
The maximum charging capacity is 5 W.  
To establish a connection with the vehicle's  
external aerial:  
●
Qi technology does not allow you to  
charge more than one mobile device simul-  
taneously.  
●
Place your mobile device in the middle of  
the pad with the screen facing up Fig. 250.  
›››  
●
No improvement in the transmission qual-  
ity can be guaranteed if there is more than  
one mobile phone on the pad.  
When you do so, make sure there are no ob-  
jects between the pad and the mobile phone.  
●
You are advised to keep the engine run-  
Your mobile phone will automatically be  
ready to make use of the external aerial.  
ning to guarantee proper wireless charging  
of your device.  
●
When a telephone with Qi technology is  
WARNING  
connected by USB, the charging will be  
performed through the medium specified  
by each mobile device manufacturer.  
The mobile phone may heat up due to the  
wireless charging. Think about the temper-  
234  

Related Topics

Infotainment System
Introduction Safety warnings Overview of the unit General instructions for use Connectivity Data transfer Full Link* SEAT Media Control* WLAN access point* Radio Media Navigation Navigation in Offroad mode* Vehicle Menu Telephone Multimedia

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot