Checking and refilling levels
●
level indicator may not detect the load prop-
erly.
Wait until the contents of the refill bottle
WARNING
have been poured into the AdBlue® tank. Do
not compress or break the bottle!
AdBlue® should only be stored in the origi-
nal container, which should be tightly
closed and kept in a safe place.
If a warning message about AdBlue® levels
appears on the dash panel display, fill at
least the minimum amount required (ap-
prox. 5 litres) Only after adding this amount
will the system detect that AdBlue® has been
added and you will be able to start the en-
gine again. The maximum amount that can
be refilled is 11 litres.
●
Turn the bottle in a counter-clockwise di-
rection and gently pull it upwards
.
›››
Never keep AdBlue® in empty food con-
tainers, bottles or other similar containers.
Other people may confuse it for other
products.
Keep AdBlue® out of the reach of chil-
dren.
●
The AdBlue® tank is full when no more liquid
comes out of the bottle.
●
●
Screw on the tank cap in a clockwise direc-
●
tion until it is tightly closed.
●
Close the fuel tank flap.
Switch the ignition off. If the ignition is not
switched off during refilling, the warning to re-
fill may continue to appear on the instrument
panel display.
CAUTION
Operations before driving
●
●
When refilling, the nozzle grip should be
aligned downward. Otherwise the nozzle
will not connect automatically.
After refilling the tank, only switch on the ig-
nition.
●
Leave the ignition on for at least 30 sec-
Fill with a refill bottle
Only use AdBlue® that complies with ISO
22241-1. Only use original containers.
●
Do not try to add any more additive after
onds for the system to detect the fluid load.
●
the nozzle has stopped for the first time.
The AdBlue tank could overflow and AdBlue
could spill out.
Make sure you wait for at least 30 seconds
before starting the engine!
●
Open the tank cover Fig. 308.
Unscrew the tank cap by turning it in an an-
›››
Only use AdBlue® that complies with ISO
22241-1. Only use original containers.
Never mix AdBlue® with water, fuel or ad-
ditives. Any type of damage caused by
such a mixture will not be covered by the
warranty.
●
Refilling the dispenser with AdBlue
●
ti-clockwise direction.
Valid for vehicles with selective catalytic re-
duction.
●
●
Please observe the manufacturer's instruc-
tions, indicated on the refill bottle.
●
Open the tank cap.
Turn the SCR tank cap anti-clockwise
Fig. 308.
●
Check the expiry date.
●
Never pour AdBlue® into the fuel tank.
This could result in engine damage.
●
●
Remove the cap of the refill bottle.
›››
●
Insert the neck of the bottle in the tank filler
●
Add AdBlue until the nozzle stops for the
first time.
●
Do not carry the refill bottle inside the
neck vertically and screw the bottle on by
hand, by turning it in a clockwise direction.
vehicle. If there is a leak (due to tempera-
ture changes or damage to the bottle), the
AdBlue® may damage the vehicle.
●
Close the SCR tube by turning it clockwise
●
Press the refill bottle in the direction of the
»
until you hear a click.
filler neck and hold it in this position.
321
English 
