2012-2020 Seat Leon 4 Door Safety -> Seat belts User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety -> Seat belts for Your Seat Leon 4 Door Third Generation (2012-2020)

Seat belts  
Seat belt control lamp*  
Never lay or fit floor mats or other floor  
Seat belts  
coverings over the original floor mats. This  
would reduce the pedal area and could ob-  
struct the pedals. Risk of accident.  
Why wear a seat belt  
Never place objects in the driver footwell.  
An object could move into the pedal area  
and impair pedal operation. In the event of  
a sudden driving or braking manoeuvre,  
you will not be able to operate the brake,  
clutch or accelerator pedal. Risk of acci-  
dent!  
Number of seats  
Your vehicle has five seats, two in the front  
and three in the rear. Each seat is equipped  
with a three-point seat belt.  
In some versions, your vehicle is approved  
only for four seats. Two front seats and two  
rear seats.  
Fig. 92 Dashboard: right rear seat occupied  
and corresponding seat belt fastened display.  
WARNING  
It lights up red  
Never transport more than the permitted  
amount of people in your vehicle.  
Driver or passenger has not fastened seat belt.  
Every vehicle occupant must properly  
The control lamp illuminates to remind the  
driver to fasten his seat belt.  
fasten and wear the seat belt belonging to  
his or her seat. Children must be protected  
with an appropriate child restraint system.  
Before starting the vehicle:  
Fasten your seat belt securely.  
Instruct your passengers to fasten their  
seat belts properly before driving off.  
Protect children by using a child seat ac-  
cording to the child's height and weight.  
When starting to drive, if the vehicle's speed  
surpasses approx. 25 km/h (15 mph) and the  
seat belts are not fastened or are unfastened  
during the drive, a warning sound will be  
»
69  
Safety  
heard for a few seconds. The warning light  
belts before every trip, even when "just driving  
around the corner".  
The protective function of seat  
belts  
will also flash .  
The lamp goes out when the driver and  
passenger seat belts are fastened with the  
ignition switched on.  
Ensure that your passengers wear their seat  
belts as well. Accident statistics have shown  
that wearing seat belts is an effective means  
of substantially reducing the risk of injury and  
improving the chances of survival when in-  
volved in a serious accident. Furthermore,  
properly worn seat belts improve the protec-  
tion provided by airbags in the event of an  
accident. For this reason, wearing a seat belt  
is required by law in most countries.  
Rear seat belts fastened display*  
Depending on the model version, when the  
ignition is switched on, the seat belt status  
display Fig. 92 on the instrument panel in-  
›››  
forms the driver whether the passengers in  
the rear seats have fastened their seat belts.  
The symbol indicates that the passenger in  
this seat has fastened “his or her” seat belt.  
Although your vehicle is equipped with air-  
bags, the seat belts must be fastened and  
worn. The front airbags, for example, are only  
triggered in some cases of head-on collision.  
The front airbags will not be triggered during  
minor frontal or side collisions, rear-end colli-  
sions, rollovers or accidents in which the air-  
bag trigger threshold value in the control unit  
is not exceeded.  
Fig. 93 Drivers with properly worn seat belts  
will not be thrown forward in the event of sud-  
den braking.  
When a seat belt in the rear seats is fastened  
or unfastened, the seat belt status is dis-  
played for approximately 30 seconds. The in-  
dication can be hidden by pressing the  
0.0/SET button on the dash panel.  
Properly worn seat belts hold the occupants  
in the proper position. They also help prevent  
uncontrolled movements that may result in  
serious injury and reduce the risk of being  
thrown out of the vehicle in case of an acci-  
dent.  
The seat belt status flashes for a maximum of  
30 seconds when a seat belt in the rear seats  
is unfastened while the vehicle is in motion. An  
audible warning will also be heard if the vehi-  
cle is travelling at over 25 km/h (15 mph).  
Therefore, you should always wear your seat  
belt and ensure that all vehicle occupants  
have fastened their seat belts properly before  
you drive off!  
Vehicle occupants wearing their seat belts  
correctly benefit greatly from the ability of  
the belts to absorb kinetic energy. In addition,  
the front part of your vehicle and other pas-  
sive safety features (such as the airbag sys-  
tem) are designed to absorb the kinetic ener-  
gy released in a collision. Taken together, all  
these features reduce the releasing kinetic  
energy and consequently, the risk of injury.  
This is why it is so important to fasten seat  
Important safety instructions for  
the use of seat belts  
Always wear the seat belt as described in  
this section.  
70  
Seat belts  
Ensure that the seat belts can be fastened  
at all times and are not damaged.  
Head-on collisions and the laws of  
physics  
Bulky and unfastened clothing (such as  
an overcoat over a sweater) impairs the  
proper fit and function of the seat belts, re-  
ducing their capacity to protect.  
WARNING  
If seat belts are worn incorrectly or not at  
all, the risk of severe injuries increases. The  
optimal protection from seat belts can be  
achieved only if you use them properly.  
The slot in the seat belt buckle must not  
be blocked with paper or other objects, as  
this can prevent the latch plate from en-  
gaging securely.  
Fasten your seat belt before every trip -  
Never use seat belt clips, fastening rings  
even when driving in town. Other vehicle  
occupants must also wear the seat belts at  
all times, otherwise they run the risk of be-  
ing injured.  
or similar items to alter the position of the  
belt webbing.  
Frayed or torn seat belts or damage to  
the connections, belt retractors or parts of  
the buckle could cause severe injuries in  
the event of an accident. Therefore, you  
must check the condition of all seat belts  
at regular intervals.  
The seat belt cannot offer its full protec-  
Fig. 94 A driver not wearing a seat belt is  
tion if the seat belt is not positioned cor-  
rectly.  
thrown forward violently.  
Never allow two passengers (even chil-  
dren) to share the same seat belt.  
Seat belts which have been worn in an  
accident and have been stretched must be  
replaced by a specialised workshop. Re-  
newal may be necessary even if there is no  
apparent damage. The belt anchorage  
should also be checked.  
Always keep both feet in the footwell in  
front of your seat as long as the vehicle is in  
motion.  
Never unbuckle a seat belt while the ve-  
hicle is in motion. Risk of fatal injury.  
Do not attempt to repair a damaged seat  
The seat belt must never be twisted while  
belt yourself. The seat belts must not be re-  
moved or modified in any way.  
it is being worn.  
The seat belt should never lie on hard or  
The belts must be kept clean, otherwise  
Fig. 95 The unbelted passenger in the rear  
seat is thrown forward violently, hitting the driv-  
er who is wearing a seat belt.  
fragile objects (such as glasses or pens,  
etc.) because this can cause injuries.  
the retractors may not work properly.  
Do not allow the seat belt to be damaged  
or jammed, or to rub on any sharp edges.  
The effects of the laws of physics in the case  
of a head-on collision are easy to explain: the  
»
Never wear the seat belt under the arm or  
in any other incorrect position.  
71  
Safety  
moment a vehicle starts moving, a type of en-  
ergy called “kinetic energy” starts acting on  
both the vehicle and its passengers.  
Even at low speeds the forces acting on the  
body in a collision are so great that it is not  
possible to brace oneself with one's hands. In  
a frontal collision, unbelted passengers are  
thrown forward and will make violent contact  
with the steering wheel, dash panel, wind-  
screen or whatever else is in the way  
How to properly adjust your  
seat belt  
The amount of “kinetic energy” depends on  
the speed of the vehicle and on the weight of  
the vehicle and of its passengers. The higher  
they are, the more energy there is to be “ab-  
sorbed” in the event of an accident.  
Fastening and unfastening your  
seat belt  
Fig. 94.  
›››  
It is also important for rear passengers to  
wear seat belts properly, as they could other-  
wise be thrown forward violently through the  
vehicle interior in an accident. Passengers in  
the rear seats who do not use seat belts en-  
danger not only themselves but also the front  
The most significant factor, however, is the  
speed of the vehicle. If the speed doubles  
from 25 km/h (15 mph) to 50 km/h (30 mph),  
for example, the corresponding kinetic ener-  
gy is multiplied by four.  
Given that the passengers of the vehicle in  
our example do not have their seat belts fas-  
tened, in the event of a collision the entire  
amount of the passengers' kinetic energy will  
be only absorbed by the mentioned impact.  
occupants Fig. 95.  
›››  
Even at speeds of 30 km/h (19 mph) to  
50 km/h (30 mph), the forces acting on bod-  
ies in a collision can easily exceed one tonne  
(1000 kg). At greater speed these forces are  
even higher.  
Vehicle occupants not wearing seat belts are  
not “attached” to the vehicle. In a head-on  
collision, they will move forward at the same  
speed their vehicle was travelling just before  
the impact. This example applies not only to  
head-on collisions, but to all accidents and  
collisions.  
Fig. 96 Positioning and removing the seat belt  
buckle.  
72  
Seat belts  
The seat belts are equipped with an auto-  
matic retractor on the shoulder strap. Full  
freedom of movement is permitted when the  
shoulder belt is pulled slowly. However, dur-  
ing sudden braking, during travel in steep  
areas or bends and during acceleration, the  
automatic retractor on the shoulder belt is  
locked.  
Never unbuckle a seat belt while the ve-  
hicle is in motion. If you do, you increase  
the risk of sustaining severe or fatal injuries.  
An incorrectly worn seat belt can cause  
severe injuries in the event of an accident.  
For pregnant women, the lap part of the  
seat belt must lie as low as possible over  
the pelvis, never across the stomach, and  
always lie flat so that no pressure is exer-  
ted on the abdomen Fig. 97.  
›››  
The automatic belt retractors on the front  
seats are fitted with seat belt tensioners  
page 73.  
›››  
Always engage the retractor lock when  
you are securing a child seat in group 0, 0+  
or 1 page 80.  
›››  
Fig. 97 Position of seat belt during pregnancy.  
Releasing the seat belt  
Read and observe the warnings  
page 70.  
Read the additional information carefully  
››› page 20.  
Press the red button on the belt buckle  
›››  
Fig. 96 B. The latch plate is released and  
›››  
springs out  
.
›››  
Fasten your seat belt  
Guide the belt back by hand so that it rolls  
The seat belt cannot offer its full protection if  
the seat belt is not positioned correctly.  
up easily and the trim is not damaged.  
Seat belt tensioners  
Positioning seat belts  
Adjust the seat and head restraint correct-  
How the seat belt tensioner works  
ly.  
Seat belts offer their maximum protection on-  
ly when they are properly positioned.  
Read the additional information carefully  
››› page 21.  
To fasten the belt, take hold of the latch  
plate and pull it slowly across your chest and  
lap.  
WARNING  
The seat belts for the occupants in the front  
seats are equipped with belt tensioners. Sen-  
sors will trigger the belt tensioners only dur-  
ing severe head-on, lateral and rear-end col-  
lisions and only if the seat belt is worn. This  
retracts and tightens the seat belts, reducing  
the forward motion of the occupants.  
The seat belts offer best protection only  
Insert the latch plate into the buckle for the  
when the backrests are in an upright posi-  
tion and the seat belts have been fastened  
properly.  
appropriate seat and push it down until it is  
securely locked with an audible click  
Fig. 96 A.  
›››  
Never put the latch plate in the buckle of  
Pull the belt to ensure that the latch plate is  
securely engaged in the buckle.  
another seat. If you do this, the seat belt  
will not protect you properly and the risk of  
injury is increased.  
»
73  

Related Topics

Popular Owner Manuals