The essentials
The level is measured using the dipstick loca-
ted in the engine compartment
››› page 324.
Engine oil specifications
Have the oil changed by a specialised work-
shop.
Diesel engines
Engine type
Using engine oil that is compliant with the VW
504 00 standard instead of VW 508 00
could increase consumption and the vehicle’s
CO2 emissions.
Type of
Service
Specifica-
tion
A
The oil indicator must be between zones
C
A
and . It can never go above zone
.
Set Service
and Flexible
Service Inter-
vals
●
●
A
Zone : do not add oil.
With particulate
filter (DPF)a)
VW 507 00
B
Zone : you can add oil but keep the level
Recommended by SEAT
in that zone.
Without particu-
late filter (DPF)
Set Service
Intervals
VW 505 01b)
VW 506 01b)
●
C
B
Zone : add oil until zone
.
SEAT recommends using original SEAT oil to
guarantee high SEAT engine performance.
Topping up engine oil
a)
Only use recommended oils, otherwise you may
damage the engine.
●
Unscrew cap from oil filler opening.
Add oil slowly.
At the same time, check the level to ensure
b)
If the quality of the fuel available in the country
●
●
in Changing engine oil on
page 327
›››
does not fulfil the EN 590 (for diesel) standard.
you do not add too much.
If the engine oil level is too low
page 324
›››
●
B
When the oil level reaches at least zone
,
You can get information about the correct en-
gine oil for your vehicle in your specialised
shop. If you have to change your engine oil,
use this oil.
unscrew the engine oil filler cap carefully.
Engine oil additives
No type of additive should be mixed with the
engine oil. The deterioration caused by these
additives is not covered by the warranty.
If the recommended engine oil is not availa-
ble, in the event of an emergency you can
change the oil once with a maximum of 0.5 L
of the next oil until the next oil change:
–
Petrol engines: standard VW 504 00,
VW 502 00, VW 508 00, ACEA C3 or
API SN.
–
Diesel engines: standard VW 507 00,
VW 505 01, ACEA C3 or API CK-4.
48