1999-2006 Skoda Fabia 4 Door Seats and storage -> Boot User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Seats and storage -> Boot for Your Skoda Fabia 4 Door First Generation (1999-2006)

Adjusting the head restraints  
Storing the head restraints in the seat squabs  
Fig. 60  
Rear seats: Inserting head re-  
straints in the seat cushions  
The rear head restraints can be inserted into the corresponding holes in the  
folded seat squabs » Fig. 60.  
Fig. 59 Head restraint: adjusting/removing  
Setting the height  
Grasp the side of the head restraint with both hands and push it upwards as  
required » Fig. 59 - .  
Boot  
To move the head restraint downwards, press and hold the safety but-  
ton » Fig. 59 - with one hand and push the head restraint down with the  
other hand.  
Introduction  
This chapter contains information on the following subjects:  
Class N1 vehicles  
Fastening elements  
Folding hooks  
Fixing nets  
69  
69  
70  
70  
70  
71  
Removing/installing  
Pull the head restraint out of the seat backrest as far as the stop.  
Press the locking button in the direction of the arrow » Fig. 59 - and pull  
the head restraint out.  
To re-insert the head restraint, push it far enough down into the seat back-  
rest until the locking button clicks into place.  
Boot cover  
Further positions of the luggage compartment cover  
Retractable luggage compartment cover (Fabia Estate)  
71  
Best protection is achieved if the top edge of the head restraint is at the same  
level as the upper part of your head.  
Please observe the following for the purpose of maintaining good handling  
characteristics of your vehicle:  
The head restraints must be adjusted to match the size of the seat occupant.  
Correctly adjusted head restraints together with the seat belts offer effective  
protection for the occupants » page 7.  
Distribute loads as evenly as possible.  
Place heavy objects as far forward as possible.  
Attach the items of luggage to the lashing eyes or using the fixing  
net » page 69.  
WARNING  
The head restraints must be correctly adjusted in order to offer effective  
In the event of an accident, even small and light objects gain so much kinetic  
energy that they can cause severe injuries.  
protection for the occupants in the event of an accident.  
Never drive with the head restraints removed - there is a risk of injury.  
If the rear seats are occupied, the rear head restraint must not be in the  
The magnitude of the kinetic energy is dependent on the speed at which the  
vehicle is travelling and the weight of the object.  
lower position.  
68  
Using the system  
Example: In the event of a frontal collision at a speed of 50 km/h, an object  
weighing 4.5 kg produces energy corresponding to 20 times its own weight.  
This means that it results in a weight of approx. 90 kg “ ”.  
Note  
Tyre pressure must be adjusted to the load » page 151, Tyre service life.  
Class N1 vehicles  
WARNING  
Store the objects in the boot and attach them to the lashing eyes.  
Loose objects can be thrown forward during a sudden manoeuvre or in  
Read and observe and on page 69 first.  
On class N1 vehicles, which are not fitted with a protective grille, a lashing set  
which complies with the standard EN 12195 (1 - 4) must be used for fastening  
the load.  
case of an accident and can injure the occupants or other road users.  
Loose objects could hit a deployed airbag and injure occupants – there is  
a risk of death.  
Please note that the handling properties of the vehicle may be affected  
The proper functioning of the electrical system is essential for the safe opera-  
tion of the vehicle. It is important to ensure that it is not damaged during mod-  
ifications or when loading or unloading the luggage compartment.  
when transporting heavy objects as the centre of gravity can be shifted –  
there is a risk of an accident. The speed and style of driving must be adjus-  
ted accordingly.  
If the items of luggage or objects are attached to the lashing eyes with  
Fastening elements  
unsuitable or damaged lashing straps, injuries can occur in the event of  
braking manoeuvres or accidents. To prevent items of luggage from being  
thrown forward, always use suitable lashing straps which must be firmly at-  
tached to the lashing eyes.  
Items carried in the luggage compartment must be stowed in such a way  
that no objects are able to slip forward under sudden driving manoeuvres  
or braking – there is a risk of injury.  
When transporting fastened objects which are sharp and dangerous in  
the boot that has been enlarged by folding the rear seats forward, ensure  
the safety of the passengers transported on the other rear seats » page 9,  
Correct seated position of the rear seat passengers.  
If the rear seat next to the folded forward seat is occupied, ensure maxi-  
Fig. 61 Boot: Lashing eyes and fastening elements  
Read and observe and on page 69 first.  
mum safety, e.g. by placing the goods to be transported in such a way that  
the seat is prevented from folding back in case of a rear collision.  
Never drive with the tailgate fully opened or slightly ajar otherwise ex-  
haust gases may get into the interior of the vehicle – risk of poisoning.  
Under no circumstances, should the permissible axle loads and permissi-  
ble gross weight of the vehicle be exceeded – there is the risk of an acci-  
dent.  
The following fastening elements are found in the luggage compart-  
ment » Fig. 61.  
A
B
Lashing eyes for fastening items of luggage and fixing nets.  
Fastening elements for fastening fixing nets.  
Never transport people in the boot!  
CAUTION  
CAUTION  
The maximum permissible load of the lashing eyes is 3.5 kN (350 kg).  
Please ensure that the heating elements for the rear window heater are not  
damaged as a result of abrasive objects.  
Note  
The upper front lashing eyes are located underneath the folding rear seat  
backrest » Fig. 61.  
69  
Seats and storage  
WARNING  
Folding hooks  
Do not exceed the maximum permissible load of the fixing nets. Heavy ob-  
jects are not secured adequately – there is a risk of injury.  
Fig. 62  
Boot: folding hooks  
CAUTION  
The maximum permissible load of the fixing nets is 1.5 kg.  
Do not place any sharp objects in the nets – risk of damaging the net.  
Boot cover  
Read and observe and on page 69 first.  
Folding hooks for attaching small items of luggage, such as bags etc., are pro-  
vided on both sides of the boot. » Fig. 62.  
CAUTION  
The maximum permissible load of the hook is 7.5 kg.  
Fixing nets  
Fig. 64 Removing the boot cover  
Read and observe and on page 69 first.  
The boot cover can be removed if you wish to transport bulky goods.  
Removing cover  
Unhook support straps  
1
» Fig. 64.  
Remove the cover from the holders 2 by lightly knocking on the underside  
of the cover in the area between the holders.  
Installing the cover  
Place the cover on the contact surfaces of the side trim panel.  
Place the recesses of the cover 3 » Fig. 64 over the holders 2 in the side  
trim panel.  
Fig. 63 Fixing net: double horizontal pocket, floor fixing net/double verti-  
cal pockets  
Interlock the cover by lightly knocking on the top side of the cover in the  
area between the holders.  
Read and observe and on page 69 first.  
Fixing examples for a fixing net as a horizontal pocket, floor fixing net » Fig. 63  
- and a horizontal pocket » Fig. 63 - .  
Hook the support straps  
1
on the boot lid.  
70  
Using the system  
WARNING  
CAUTION  
In this position » Fig. 65 - the luggage compartment cover is designed for  
small objects up to a weight of 2.5 kg.  
No objects should be placed on the boot cover, the vehicle occupants could  
be endangered if there is sudden braking or the vehicle collides with some-  
thing.  
Retractable luggage compartment cover (Fabia Estate)  
CAUTION  
When closing the boot lid, jamming and damage to the luggage compartment  
cover or the side trim panel can occur if handled in an unprofessional way. The  
following guidelines must be observed.  
The recesses in the cover 3 » Fig. 64 must lock in the holders in the side  
trim panel 2 .  
The items which are transported must not exceed the height of the lug-  
gage compartment cover.  
The cover must not be jammed in the seal of the boot lid when it is in the  
opened position.  
There must be no object in the gap between the opened cover and the rear  
Fig. 66 Boot: foldable boot cover/removing foldable boot cover  
Read and observe and on page 69 first.  
Pulling out  
backrest.  
Note  
Opening the boot lid also lifts up the boot cover.  
Pull the retractable luggage compartment cover in direction of arrow  
Further positions of the luggage compartment cover  
1
» Fig. 66 as far as the stop into the secured position.  
Retracting  
Press the cover in the handle area in the direction of the arrow 2 , and the  
cover automatically rolls up into position.  
Removing  
The fully folded luggage compartment cover can be removed to transport  
bulky goods by pressing on the side of the cross rod in the direction of the  
arrow 3 and taking it out by moving it in the direction of the arrow 4 .  
WARNING  
No objects should be placed on the foldable boot cover.  
Fig. 65 The luggage compartment cover: Stowed in the lower position/  
behind the rear seats  
Read and observe and on page 69 first.  
The luggage compartment cover can be fitted to the following positions:  
In the lower position on the support elements » Fig. 65 - »  
Behind the rear seats » Fig. 65 - .  
71  
Seats and storage  

Related Topics

Popular Owner Manuals