Starting and driving for Your Skoda Fabia 4 Door Third Generation (2014-2020)

102 Starting and driving › Starting with the key  
Start at the push of a button  
Starting instructions  
Starting and driving  
Starting with the key  
Starting instructions  
DANGER  
Danger of poisoning by exhaust gases!  
Do not run the engine in an enclosed space.  
DANGER  
Danger of poisoning by exhaust gases!  
Function conditions  
The vehicle key is located in the vehicle interior.  
Do not run the engine in an enclosed space.  
Positions of the key in the ignition lock  
NOTICE  
Ignition off  
1
2
3
Risk of key loss, possibly of key damage!  
The system can detect the key even if it has been  
forgotten on the vehicle roof.  
Ignition on  
Start the motor  
Always keep the key with you.  
Switching the ignition on and off  
Press the starter button.  
Start vehicle with automatic transmission  
Secure the vehicle with the parking brake.  
Keep the brake pedal depressed.  
Secure the vehicle with the parking brake.  
Keep the brake pedal depressed.  
Move the selector lever to position or  
Press the starter button.  
.
Move the selector lever to position or  
.
Turn key to position 3 .  
Let go of the key.  
CAUTION  
Danger of unexpected vehicle movement!  
At temperatures below -10°C, start the vehicle  
with the selector lever in the position.  
CAUTION  
Danger of unexpected vehicle movement!  
At temperatures below -10°C, start the vehicle  
with the selector lever in the position.  
Stopping the engine  
Secure the vehicle with the parking brake.  
Turn key to position 1 .  
On vehicles with an automatic transmission, the key  
can only be removed when the selector lever is in the  
position  
.
NOTICE  
Risk of engine overheating!  
WARNING  
Steering lock hazard!  
During a journey with the engine stopped, the igni-  
tion must always be switched on.  
Do not switch the engine off immediately at the  
end of your journey after the engine has been run-  
ning at high loads. Leave it to run at an idling speed  
for about 1 minute.  
NOTICE  
Risk of engine overheating!  
Do not switch the engine off immediately at the  
end of your journey after the engine has been run-  
ning at high loads. Leave it to run at an idling speed  
for about 1 minute.  
Starting and driving › Starting issues 103  
Starting issues  
Troubleshooting  
START STOP  
Usage  
The START-STOPSystem reduces polluting emis-  
sions and CO2emissions and saves fuel.  
NOTICE  
Risk of engine damage!  
Do not start the vehicle by towing.  
The engine does not start  
Functionality  
Switch off the ignition.  
Wait 30 seconds and repeat the starting proce-  
dure.  
If the system determine that the engine is not nee-  
ded when the vehicle stops, it turns off the engine  
and starts it again when moving off.  
If the engine does not start, start the vehicle using  
another vehicle's battery » page 124 or get help  
from a specialist company.  
Vehicle with manual transmission  
A system-related engine shutdown takes place when  
the vehicle is stopped, when the gear lever is shifted  
into neutral and when the clutch pedal is released.  
The engine does not start, the display shows a  
message regarding the immobilizer  
Use the other vehicle key.  
If the engine does not start, seek the help of a spe-  
cialist garage.  
A system-related engine start occurs when the  
clutch pedal is pressed down.  
Vehicle with automatic transmission  
A system-related engine switch-off occurs when the  
brake pedal is actuated and the engine is stopped.  
A system-related engine start takes place after re-  
leasing the brake pedal.  
Status display in the instrument cluster display  
- Engine is switched off by the START-  
STOPSystem  
- Engine is switched off by the START-  
STOPSystem not switched off due to func-  
tional conditions not being met  
Display of detailed information in the infotainment  
screen  
Vehicle status  
Or:  
Vehicle status  
The key might not be detected if the battery in  
the key is nearly discharged or the signal is faulty.  
Functional conditions  
The engine cannot be turned off with the starter  
button  
Some conditions are system-related and cannot be  
influenced or recognized. Therefore, the system may  
react differently in situations which seem identical  
from the driver's perspective.  
Hold the starter button or press twice.  
The radiator fan keeps running even after the en-  
gine has stopped  
The radiator fan can continue to run for approxi-  
mately 10 minutes after the engine is stopped. This  
is not a defect.  
The driver must meet the following conditions.  
The driver's door is closed.  
The driver has fastened the seat belt.  
The driving speed was higher than 4 km/h after  
The engine makes noises after the cold start  
The increased running noise is due to the briefly in-  
creased engine speed. This is not a defect.  
the last stop.  
No trailer or other accessory is connected to the  
trailer socket.  
104 Starting and driving › Manual gearbox  
Settings  
Idle position  
There is no transmission of engine power to the  
wheels.  
Forward drive / sports program  
The gear is changed automatically.  
In mode the gear is changed at higher speeds  
Automatic activation  
Upon start-up of the engine.  
Deactivate / activate system  
Press the button.  
When the system is deactivated, the symbol lights  
than in mode  
Select between and (sprung position)  
.
up in the button  
.
If a system-related engine switch-off occurs and the  
system is deactivated, the engine will start.  
Selector lever out of position or solve  
lights up - the selector lever is locked  
Press the brake pedal,  
Troubleshooting  
and at the same time,  
press the button in the  
selector lever.  
The engine does not switch off when stopping, or  
it starts before starting up  
The system has detected that the engine is running.  
Manual gearbox  
Operation  
NOTICE  
Danger of engine damage!  
Shift to a higher gear before reaching the red area  
on the tachometer scale.  
WARNING  
Danger of the vehicle rolling away automatically!  
When the selector lever is in the position  
in manual shift mode, secure the vehicle with the  
brake.  
,
or  
NOTICE  
Danger of gearbox damage!  
Fully depress the clutch pedal when changing gear.  
When not shifting gear, do not put your hand on  
the shift lever.  
Operation  
Start up  
Keep the brake pedal depressed.  
Start the engine.  
Press the button on the selector lever and set it to  
the desired position.  
Release the brake pedal and press the accelerator  
pedal lightly.  
Engaging reverse gear  
Stop the vehicle.  
Fully depress the clutch.  
Move the shift lever to the neutral position.  
Push the shift lever down.  
Turn it completely to the left.  
Wait briefly.  
Speeding up while driving (kick-down)  
Fully depress the accelerator.  
Engage reverse gear.  
Stopping temporarily (e.g. at a junction)  
Leave the selector lever in the position  
cure the vehicle with the brake pedal.  
and se-  
Automatic gearbox  
Selector lever positions  
Parked vehicle  
Stop  
Keep the brake pedal depressed.  
Secure the vehicle with the parking brake.  
Press the button in the selector lever and bring it  
to the position adjust.  
Turn off the engine.  
The drive wheels are  
locked.  
Only adjust he po-  
sition when the vehi-  
cle is stationary.  
Drive in neutral  
If the system detects that no gear is engaged while  
driving, it automatically switches to neutral position.  
Reverse gear  
Only adjust he po-  
sition when the vehi-  
cle is stationary.  
It will  
be displayed in the instrument cluster.  
Starting and driving › Economical driving style 105  
Requirements for driving in neutral position  
Stop driving! Stop the vehicle and stop the engine.  
After the indicator light goes out, your journey can  
continue.  
The mode is selected.  
Neither the accelerator nor the brake pedal is  
pressed.  
If the warning light does not go out, stop driving!  
Get the help of a specialist company.  
The vehicle speed is 20-130 km/h.  
No device is connected to the trailer socket.  
Gearbox impaired  
illuminates together with  
Message regarding the gearbox in emergency  
mode  
Manually switching gear with the selector lever  
To turn on, move the selector lever  
(to the left for right-hand drive vehicles).  
to the right  
To turn off, move the selector lever back into posi-  
You may continue driving, exercising appropriate  
caution.  
Immediately seek the help of a specialist company.  
tion  
.
Upshift  
+
-
Downshift  
illuminates together with  
Message regarding a gearbox fault  
Stop driving! Get the help of a specialist company.  
Starting the stuck vehicle  
Adjust the selector lever quickly between  
. The vehicle will then start to rock and be easier  
to free.  
and  
Manually changing gear with the shift paddles on  
the steering wheel  
Mechanical release of the automatic gearbox  
Downshift  
Upshift  
-
Secure the vehicle with the parking brake.  
+
Insert a flat-head  
screwdriver or push a  
similar tool into the  
gap in the area of ar-  
row A .  
To turn on, press the  
+
shift paddle - or  
.
To turn off, hold the  
+
shift paddle  
.
Carefully loosen and  
lift the cover of the  
shift gate.  
If none of the shift pad-  
dles are pressed for a  
certain time, manual shift  
mode turns off automatically.  
Press on the plastic  
If the engine threatens to over-rev  
part in the direction of  
the arrow and at the  
same time press the  
button on the selector  
lever.  
The gearbox automatically changes to the next  
higher gear.  
The transmission prevents changing to the next  
lower gear.  
Move selector lever to  
position  
.
Troubleshooting  
The selector lever cannot be moved out of posi-  
tion in the normal way  
Mechanically unlock the selector lever » page 105.  
Economical driving style  
Gearbox overheated  
illuminates together with  
Message regarding the gearbox overheating  
Tips for economical driving style and  
evaluation of driving economy  
You may continue driving, exercising appropriate  
caution.  
Tips for economical driving  
Avoid unnecessary acceleration and braking.  
along with  
Display the gear recommendation in the instru-  
ment cluster display  
Message regarding the gearbox overheating  
106 Starting and driving › Towing a trailer  
Avoid full acceleration and excessive speeds.  
Avoid engine idling during longer periods of sta-  
tionary time.  
The ride is not smooth  
Recommended gear  
In Infotainment it is possible to display up to  
three consumers that are currently making up the  
largest share of fuel consumption.  
Consumer comfort  
Or:  
Do not warm up the engine while the vehicle is sta-  
tionary. If possible, start your journey as soon as  
the engine starts.  
Observe the prescribed tyre pressure » page 133.  
Remove unnecessary ballast.  
Remove the roof rack when it is not needed.  
Switch on electric consumers only for as long as  
necessary.  
Consumer comfort  
Consumption-friendly driving  
If, while driving, the system detects that no gear is  
required on a vehicle with automatic transmission, it  
automatically shifts to neutral. It therefore reduces  
fuel consumption.  
Do not leave the windows open while driving.  
Display of evaluation in the infotainment screen  
DriveGreen  
lights up in the instrument cluster.  
Or:  
DriveGreen  
Towing a trailer  
What you should be mindful of  
WARNING  
When driving with a trailer, special care is required!  
NOTICE  
With frequent towing, the vehicle is excessively loa-  
ded so this must also be checked between service  
intervals.  
Recommendations for using a trailer  
A
B
Driving fluid display  
When the driving is fluid, the display is located  
near the green dot.  
Adjust the tyre pressure on the vehicle for full load.  
Do not exceed the maximum permissible total  
weight of the vehicle and the combination weight  
specified in the technical vehicle documentation  
(e.g. in the vehicle registration documentation, in  
the COC document) and on the type plate.  
Sheet  
The greener the leaf, the more economic the  
driving style. Tapping the screen in the area of  
the sheet displays tips for reducing fuel and en-  
ergy consumption.  
For trailer operation, consider the current load con-  
dition of the vehicle as well as the distribution of  
the load in the trailer. The coupled trailer increases  
the rear axle load and can therefore reduce the  
payload.  
Adjust the headlight range of the headlights ac-  
cording to the load status of the vehicle. The front  
of the vehicle may lift up when a trailer is being  
towed and the headlights may dazzle other road  
users.  
C
D
Driving economy diagram  
Each bar indicates driving efficiency in 5 second  
increments. The current bar is on the left. The  
higher the green bars, the more economical the  
driving style.  
Points system (0-100)  
The higher the indicated value, the more eco-  
nomical the driving style. By tapping the screen  
in the area of value D , a rating of the last 30 mi-  
nutes of driving is displayed.  
A speed of 100 km/h should not be exceeded.  
Reduce the speed by releasing the accelerator  
pedal as soon as a pendulum movement of the  
trailer is noticeable. Never attempt to stop the  
trailer from swaying by accelerating.  
E
F
Average fuel consumption  
Tapping the screen in area of value E displays  
the average fuel consumption over the past 30  
minutes.  
If the traffic area behind the trailer can not be  
viewed, install additional exterior mirrors.  
Apply the brakes in good time. If the trailer is fitted  
with a trailer brake, apply the brakes gently at first,  
then brake firmly. This will avoid brake jolts result-  
ing from the trailer wheels locking.  
Information about the current driving style  
Economical driving style  
The speed has a negative effect on fuel con-  
sumption  
Starting and driving › Towing eye and towing procedure 107  
Select a lower gear before descending to also use  
the braking force of the engine.  
Transport small and light objects in the luggage  
compartment.  
Distribution of the load over the vehicle and trailer  
combination  
Secure heavy objects against slipping, as close to  
the trailer axle as possible.  
Permitted trailer loads  
The details in the technical vehicle documentation take precedence over the information in this Owner's Man-  
ual.  
WARNING  
Risk of an accident!  
Do not exceed the permissible trailer load.  
Engine type  
Gearbox  
Permissible trailer load,  
braked (kg) a)  
Permissible trailer load, un-  
braked (kg)  
Fabia  
1000  
Fabia Combi  
1000  
Fabia  
550  
Fabia Combi  
560  
1.0 l/70 kW TSI  
1.0 l/81 kW TSI  
Manual gear-  
box  
DSG b)  
1000  
1100  
1000  
1100  
580  
560  
590  
570  
Manual gear-  
box  
DSG b)  
1100  
800  
1100  
800  
570  
540  
580  
550  
550  
1.0 l/44 kW MPI  
1.0 l/55 kW MPI  
1.6 l/66 kW MPI  
1.6 l/81 kW MPI  
Manual gear-  
box  
Manual gear-  
box  
Manual gear-  
box  
Automatic  
gearbox  
800  
1100  
1100  
800  
540  
550  
560  
1100  
1100  
560  
580  
a)  
With gradients up to 12%.  
b)  
Automatic dual-clutch transmission.  
Install the towing eye  
Towing eye and towing procedure  
Towing eye  
Screw in the towing  
eye.  
Insert the wheel  
wrench or similar ob-  
ject through the tow-  
ing eye.  
Remove the front cover  
Press on the cover cap  
and remove it.  
Tighten the towing  
eye.  
108 Starting and driving › Brakes  
Towing eye at the back  
Instructions for the driver of the pulling vehicle  
Drive slowly and smoothly.  
Only accelerate once the rope is taut.  
Instructions for the driver of the towed vehicle  
Move the shift lever to the neutral position or the  
selector lever to the position.  
If it is not possible to start the engine, switch on  
the ignition!  
WARNING  
Risk of accident!  
When the ignition is switched off, the brake booster  
and the power steering do not work. In addition,  
there is a risk that the steering lock will engage.  
After the towing process  
Unscrew the towing eye.  
Insert the cover cap.  
If it is not possible to start the engine, switch on  
the ignition!  
Towing the vehicle  
Brakes  
WARNING  
Risk of accident!  
What you should be mindful of  
The tow rope must not be twisted.  
WARNING  
When towing, drive at a speed of max. 50 km/h.  
Problems and faults with the brake system can ex-  
tend the braking distance of the vehicle!  
DANGER  
Danger of a functional restriction of the brake boos-  
ter!  
When braking in a vehicle with manual transmis-  
sion, when the vehicle is in gear and at low revs,  
depress the clutch pedal.  
DANGER  
Danger of the brakes overheating!  
WARNING  
Risk of accident!  
Use a braided synthetic fibre rope for towing. Do  
not use a twisted tow rope.  
Do not depress the brake pedal if you do not need  
to brake.  
If the original front spoiler is damaged, ensure the  
air supply to the front brakes is guaranteed.  
NOTICE  
Always keep the tow rope taut during towing.  
Do not exceed a towing distance of 50 km.  
Check the brake fluid level  
NOTICE  
Risk of gear damage!  
Test conditions  
The vehicle is on a horizontal surface.  
If the gearbox no longer contains any oil, the vehi-  
cle must only be towed with the front axle raised  
clear of the ground or transported on a special  
breakdown vehicle.  
The engine is off.  
Checking  
The fill level must be in  
the marked area.  
Vehicles with an automatic transmission must not  
be towed without the ignition switched on or with  
the rear axle raised.  
If the level is below the  
mark  
tinue.  
, do not con-  
Where should the tow rope or the tow bar be se-  
cured?  
At the front towing eye.  
On the towing eye at the back.  
On the ball bar of the factory-installed towing de-  
vice.  
Do not refill liquid.  
Get the help of a spe-  
cialist company.  
If the brake fluid level is  
too low, a light will be  
displayed in the instrument cluster.  
However, we  
Starting and driving › Handbrake 109  
recommend that you regularly check the brake fluid  
level directly on the reservoir.  
To back up  
To solve  
Pull the lever up to the  
stop position.  
WARNING  
Danger of brake failure!  
If the fluid level falls significantly within a short time  
The parking brake  
lights up.  
or drops below the mark  
have become leaky.  
, the brake system may  
Stop driving! Get the help of a specialist company.  
Pull the lever up a little and push in the lock button.  
Specification  
Press and hold the lock button and pull the lever  
completely down.  
The brake fluid must comply with standard  
VW 501 14. This standard complies with the re-  
quirements of the FMVSS 116 DOT4 standard.  
Changing  
Have the brake fluid replaced by a specialist garage.  
WARNING  
Danger of brake failure!  
If the brake fluid change date is exceeded, heavy  
braking may cause vapour bubbles to form in the  
brake system.  
Troubleshooting  
Brake fluid level is too low  
illuminates  
Stop driving! Get the help of a specialist  
company.  
Brake system and anti-lock braking system faulty  
illuminates together with  
Stop driving! Get the help of a specialist  
company.  
Braking effect reduced  
Moist, frozen, salted or corroded brakes can impair  
the braking effect.  
Clean the brakes by braking repeatedly if the traffic  
conditions allow it.  
When the engine is stopped, the brake booster  
does not work  
Depress the brake pedal more forcefully.  
Handbrake  
service  
WARNING  
Risk of accident!  
An insufficiently released parking brake will impair  
the function of the brake system.  
Fully release the parking brake before driving.