104 Starting and driving › Manual gearbox
Settings
Idle position
There is no transmission of engine power to the
wheels.
Forward drive / sports program
The gear is changed automatically.
In mode the gear is changed at higher speeds
Automatic activation
Upon start-up of the engine.
▶
Deactivate / activate system
Press the button.
›
When the system is deactivated, the symbol lights
than in mode
Select between and (sprung position)
.
up in the button
.
If a system-related engine switch-off occurs and the
system is deactivated, the engine will start.
Selector lever out of position or solve
lights up - the selector lever is locked
Press the brake pedal,
›
Troubleshooting
and at the same time,
press the button in the
selector lever.
The engine does not switch off when stopping, or
it starts before starting up
The system has detected that the engine is running.
Manual gearbox
Operation
NOTICE
Danger of engine damage!
Shift to a higher gear before reaching the red area
on the tachometer scale.
WARNING
Danger of the vehicle rolling away automatically!
▶ When the selector lever is in the position
in manual shift mode, secure the vehicle with the
brake.
▶
,
or
NOTICE
Danger of gearbox damage!
Fully depress the clutch pedal when changing gear.
When not shifting gear, do not put your hand on
the shift lever.
▶
Operation
Start up
▶
Keep the brake pedal depressed.
Start the engine.
Press the button on the selector lever and set it to
the desired position.
Release the brake pedal and press the accelerator
pedal lightly.
›
Engaging reverse gear
›
Stop the vehicle.
Fully depress the clutch.
Move the shift lever to the neutral position.
Push the shift lever down.
Turn it completely to the left.
Wait briefly.
›
›
›
›
›
›
›
Speeding up while driving (kick-down)
Fully depress the accelerator.
›
›
Engage reverse gear.
›
Stopping temporarily (e.g. at a junction)
Leave the selector lever in the position
cure the vehicle with the brake pedal.
and se-
›
Automatic gearbox
Selector lever positions
Parked vehicle
Stop
Keep the brake pedal depressed.
Secure the vehicle with the parking brake.
Press the button in the selector lever and bring it
to the position adjust.
Turn off the engine.
›
›
›
The drive wheels are
locked.
Only adjust he po-
sition when the vehi-
cle is stationary.
›
Drive in neutral
If the system detects that no gear is engaged while
driving, it automatically switches to neutral position.
Reverse gear
Only adjust he po-
sition when the vehi-
cle is stationary.
It will
be displayed in the instrument cluster.
English 
