Lighting, windscreen wipers and washers › COMING HOME, LEAVING HOME exterior lighting 39
Beam of light in front of the vehicle has shortened
Headlight defective.
Operation
Switching on
Seek the help of a specialist garage.
›
Push the lever in the
direction of the arrow.
›
Driving lights defective
If a message regarding the failed driving lights is dis-
played, the light will work in emergency mode.
It lights up in the instru-
ment cluster
from
Drive on, exercising appropriate caution.
Seek the help of a specialist garage.
›
›
the isolation box.
Switching off
COMING HOME, LEAVING HOME
exterior lighting
Manually switch the high beam on or off.
›
Functionality
Function restriction
The COMING HOME function turns on the light after
turning off the ignition and opening the driver's door.
The light switches off automatically after the set
lighting time has elapsed.
The system may dazzle other road users if their
headlights/lights are not detected for the following
reasons, for example:
The headlights/lights of oncoming vehicles are
covered by crash barriers, for example.
▶
The LEAVING HOME function switches on the light
when unlocking the vehicle with the wireless remote
control.
The headlamps/lights of the oncoming or preced-
ing vehicle are dirty or not functioning.
▶
Operating conditions
Settings
✓ Visibility has worsened.
Activation/deactivation
The function is activated or deactivated as follows in
✓
The light switch is in the
position.
the Infotainment system in the menu
.
Settings
Replace light bulbs
This function is set in the following menu in the Info-
tainment system:
What you should be mindful of
DIY replacement of the following bulbs is possible.
Have the remaining light sources replaced by a spe-
cialist garage.
Light Assist high-beam assist system
Functionality
The new bulb must conform to the specification of
the original light bulb. The name of the bulb is
marked on the bulb socket.
The high beam assist system automatically switches
the high beam on and off.
After changing a bulb in the low beam light, the main
beam or fog light, have the headlights adjusted by a
specialist garage.
WARNING
Risk of accident!
If necessary, manually switch the high beam on or
CAUTION
▶
off.
Halogen lamps are pressurised and can burst during
replacement!
Wear gloves and safety goggles.
▶
Operating conditions
NOTICE
Contamination of the halogen lamp reduces the life
of the lamp!
✓ The system is activated.
✓
The light switch is in the
position.
Do not touch the glass of the light bulb with your
▶
✓ The driving speed is higher than 60 km/h (for
bare fingers.
some countries, higher than 40 km/h).
✓ The low beam is switched on.