Get Driver information system Guide for Skoda Kamiq SUV First Generation (2018-2026)

54 Driver information system › Analogue instrument cluster

By holding down the button on the multifunc-

Driver information system

tion steering wheel, the heating can be switched oﬀ

or switched on at the level of the heating output that

was set before the heating was switched oﬀ.

Analogue instrument cluster

Overview

Overview of instrument cluster

A

B

C

D

E

Tachometer with indicator lights

Display

Speedometer with indicator lights

Bar with indicator lights

Multifunction button:

Setting the time

Reset odometer (trip)

Show distance and days until next service ap-

pointment

▶

F

Depending on equipment ﬁtted

Coolant temperature gauge

Gas gauge

▶

G

Petrol/diesel fuel gauge

NOTICE

Risk of serious damage to the engine and the ex-

haust system!

Never run the fuel tank completely empty!

▶

In poor visibility and with dipped headlights oﬀ,

the brightness of the instrument cluster lighting is

reduced to remind the driver to turn on the light.

Display overview

Depending on the equipment, the following informa-

tion is shown in the display.

Time

A

B

Selected gear/gear

recommendation

Also included de-

pending on vehicle

equipment:

Compass direction

display

▶

Automatic gearbox

selector lever posi-

▶

tions

Driver information system › Digital instrument cluster 55

Setting the time

Menu, indicator lights and information

C

D

Press and hold the button in the instru-

ment cluster until the menu item Time is

›

Outside temperature

- low outside temperature

Total distance travelled

displayed.

E

F

Release the button, the display shows the hour set-

ting.

›

Trip - Distance travelled after resetting the

memory

Press the button repeatedly to set the hours.

Wait 4 seconds, the display shows the minute set-

ting.

›

Overview of the main menu items

Driving data » page 57, Overview

▶

Press the key repeatedly to set the minutes.

Wait 4 seconds, the display shows the initial set-

ting.

›

Assist systems - Activate/deactivate assist sys-

tems

Navigation - e.g. Display driving recommendations,

compass, list of destination

Audio - Using radio and media

Telephone - Call list, accept or reject an incoming

call

▶

The time is also set in the Infotainment in menu

.

▶

Setting the brightness of the instrument cluster

lighting

The brightness of the instrument lighting is adjusted

automatically according to the given lighting condi-

tions.

Vehicle - Vehicle condition » page 58, Display.

▶

Operation

When low beam is switched on, the brightness of

the instruments lighting can be adjusted in the fol-

lowing menu in the Infotainment system:

Operation via the control lever

A

Press - Switch be-

tween menu

items/set values

Hold - Show main

menu

Or:

Press - Conﬁrm the

B

menu item

Digital instrument cluster

Overview

Operation via the multifunction steering wheel

Turn - Switch be-

tween menu

A

Overview of instrument cluster

items/set values

Press - Conﬁrm the

menu item

Press - Return to the

menu one level high-

er

Hold - Show main

menu

Press - Show previous menu (if one has been se-

lected) / Show telephone menu

A

B

C

D

E

Bar with indicator lights

Coolant temperature gauge

Fuel gauge

Settings

Setting the language

The language is set in the Infotainment in menu

.

Display

Additional information

Central display area

Resetting the odometer

F

Brieﬂy press the button in the instrument

cluster.

›

NOTICE

Risk of serious damage to the engine and the ex-

haust system!

Never run the fuel tank completely empty!

▶

56 Driver information system › Digital instrument cluster

Overview of the main menu items

The brightness is adjusted with the dipped beam

switched on in the infotainment in the following

menu:

Driving data » page 57, Overview

▶

Assist systems - Activate/deactivate assist sys-

tems

▶

Navigation - e.g. Display driving recommendations,

compass, list of destination

▶

Or:

Audio - Using radio and media

Telephone - Call list, accept or reject an incoming

call

▶

Set the variant of the display

Press the button on the multifunction steering

wheel to change the variant of the display presen-

tation.

›

Vehicle - Vehicle condition » page 58, Display.

▶

Select displayed variants

Operation

Press and hold the button on the multifunction

steering wheel.

›

Rotate - Switch be-

tween menu

items/Set values/

Manually change

map scale

A

Select and conﬁrm the menu item for the display

variants.

›

Select one of the following variants of the display

and conﬁrm.

›

Press - Conﬁrm the

menu item

Turn and press - Ac-

tivate automatic

map scale changing

Press - Return to the menu one level higher

Hold - Show main menu

Press - Change the variant of the display

Hold - Display the menu of preset options with

additional information

Settings

A

B

C

D

E

Classic display

Setting the language

The language is set in the Infotainment in menu

.

Advanced display

Modern display

Basic display

Resetting the odometer in the instrument cluster

Select Trip in the menu in instrument cluster display.

Sporty display (depending on equipment)

›

Turn - Select infor-

mation

Press - Conﬁrm in-

formation

A

Choose display of additional information

Press and hold the button on the multifunction

steering wheel.

›

Select and conﬁrm one of the following preﬁx op-

tions (the scope of the preﬁx options depends on

›

Hold - Reset counter

the type of Infotainment):

▶

Auto - Information depending on the selected

driving mode

Classic - Information about the selected gear

▶

and the current speed

Adjustable pre-selection options.

Setting the time

The time is set in the Infotainment in menu

▶

.

Setting the pre-selection option for the display of

additional information

The pre-selection option for displaying additional in-

formation is set in the Infotainment system in the

following menu:

Setting the brightness of the instrument cluster

lighting

The brightness is adjusted automatically according

to the given lighting conditions.

Menu item for the virtual cockpit

Driver information system › Driving data 57

Or:

F

Range (for natural gas vehicles, the range with

petrol, CNG and the sum of the ranges with both

fuel types are displayed separately).

Menu item for the virtual cockpit

Memory

The system saves the driving data in the following

memories:

Since start

Driving data from the time of switching on the ig-

nition until the ignition is switched oﬀ again is stor-

ed in the memory. If the journey is interrupted for

more than 2 hours, the memory will be reset.

▶

Long-term

› ^{Select the desired additional information in the}A

The driving data of all trips up to a total of 99

hours and 59 minutes driving time or 9999 km

driving distance is stored in the memory. If one of

the listed values is exceeded, the memory is reset.

▶

areas.

The desired function area for the preselection op-

›

tion in the area B hold to save the selection (the

scope of the preset options depends on the type

of Infotainment).

Since refuel

Driving data from the time the fuel tank was last

ﬁlled is stored in the memory. The memory is reset

the next time the tank is ﬁlled.

▶

Driving data

Overview

Operation

The driving data display works with the ignition

switched on.

Display driving data in the display of the instru-

ment cluster via the operating lever

In the instrument cluster display

Select the menu item for the driving data in the

main menu in the instrument cluster display.

›

Depending on the equipment, the display of the in-

strument cluster shows information such as speed,

fuel consumption, range, etc.

Press - Select infor-

mation/Set values

Press - Conﬁrm in-

formation

A

For natural gas vehicles, the display of the instru-

ment cluster shows the natural gas quality in percent

from 70 % to 100 %. The higher the value, the lower

the consumption of natural gas.

B

Display driving data in the display of the instru-

ment cluster via the multi-functional steering

wheel

In Infotainment

Select the menu item for the driving data in the

main menu in the instrument cluster display.

›

Rotate - Select in-

A

formation/Set values

Press - Conﬁrm in-

formation

A

B

C

D

E

Distance travelled

Driving time

Average speed

Displaying driving data in the infotainment system

The driving data is displayed in the following menu in

the infotainment system:

Average fuel consumption

Graphical fuel gauge - If the expected range is

less than 300 km, the vehicle slowly approaches

the symbol

Menu item for driving data

Or:

Menu item for the driving data

58 Driver information system › Speed limit warning

Select and reset the memory for driving data in

the display of the instrument cluster using the

control lever

Speed limit warning

Usage

To select the memory

›

The system oﬀers the possibility to set a speed limit

beyond which an acoustic warning signal will sound

and the following warning message appears in the

display of the instrument cluster.

for the displayed driv-

ing data, press button

A repeatedly.

To reset the memory,

press and hold button

›

Settings

A .

Setting the speed limit

Select memory for driving data in the display of

the instrument cluster via the multifunction steer-

ing wheel and reset it

Select Warning at or (depending on the display type)

›

and conﬁrm.

When the vehicle is stationary, set the desired

speed limit and conﬁrm.

While driving, drive at the desired speed and con-

ﬁrm it as the speed limit.

›

To select the memory

›

for the displayed driv-

ing data, press control

wheel A repeatedly.

›

Resetting the speed limit

To resetthe memory,

hold the dial A .

›

Select Warning at or (depending on the display type)

›

and conﬁrm.

To reset the speed limit, conﬁrm the stored value.

›

If the journey is interrupted for more than 2 hours,

the set limit is deactivated, but the set value remains

stored.

Selecting the memory in the infotainment system

To select the memory, use the functional areas

in the following menu in the infotainment system:

Vehicle status

Display

Menu item for driving data

Or:

Menu item for the driving data

The vehicle status is displayed in the following menu

in the infotainment system:

Resetting the memory in the infotainment system

The memory is reset in the following menu in the in-

fotainment system:

Menu item for the vehicle status

Or:

Menu item for the vehicle status

Or:

Settings

Select driving data to be displayed

The driving data to be displayed is selected in the

following Infotainment menu:

Or:

A

B

Vehicle areas displayed in colour indicate associ-

ated warnings

Setting units

The units are set in the following infotainment menu:

No notiﬁcation

Warning messages regarding the vehicle con-

dition and their quantity

Or:

C

Display of information about the condition

of the START-STOP system

Driver information system for Your Skoda Kamiq SUV First Generation (2018-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals