2018-2026 Skoda Kamiq SUV Driver information system -> Driving data User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driver information system -> Driving data for Your Skoda Kamiq SUV First Generation (2018-2026)

Driver information system › Driving data 57  
Or:  
F
Range (for natural gas vehicles, the range with  
petrol, CNG and the sum of the ranges with both  
fuel types are displayed separately).  
Menu item for the virtual cockpit  
Memory  
The system saves the driving data in the following  
memories:  
Since start  
Driving data from the time of switching on the ig-  
nition until the ignition is switched off again is stor-  
ed in the memory. If the journey is interrupted for  
more than 2 hours, the memory will be reset.  
Long-term  
Select the desired additional information in the A  
The driving data of all trips up to a total of 99  
hours and 59 minutes driving time or 9999 km  
driving distance is stored in the memory. If one of  
the listed values is exceeded, the memory is reset.  
areas.  
The desired function area for the preselection op-  
tion in the area B hold to save the selection (the  
scope of the preset options depends on the type  
of Infotainment).  
Since refuel  
Driving data from the time the fuel tank was last  
filled is stored in the memory. The memory is reset  
the next time the tank is filled.  
Driving data  
Overview  
Operation  
The driving data display works with the ignition  
switched on.  
Display driving data in the display of the instru-  
ment cluster via the operating lever  
In the instrument cluster display  
Select the menu item for the driving data in the  
main menu in the instrument cluster display.  
Depending on the equipment, the display of the in-  
strument cluster shows information such as speed,  
fuel consumption, range, etc.  
Press - Select infor-  
mation/Set values  
Press - Confirm in-  
formation  
A
For natural gas vehicles, the display of the instru-  
ment cluster shows the natural gas quality in percent  
from 70 % to 100 %. The higher the value, the lower  
the consumption of natural gas.  
B
Display driving data in the display of the instru-  
ment cluster via the multi-functional steering  
wheel  
In Infotainment  
Select the menu item for the driving data in the  
main menu in the instrument cluster display.  
Rotate - Select in-  
A
formation/Set values  
Press - Confirm in-  
formation  
A
B
C
D
E
Distance travelled  
Driving time  
Average speed  
Displaying driving data in the infotainment system  
The driving data is displayed in the following menu in  
the infotainment system:  
Average fuel consumption  
Graphical fuel gauge - If the expected range is  
less than 300 km, the vehicle slowly approaches  
the symbol  
Menu item for driving data  
Or:  
Menu item for the driving data  
58 Driver information system › Speed limit warning  
Select and reset the memory for driving data in  
the display of the instrument cluster using the  
control lever  
Speed limit warning  
Usage  
To select the memory  
The system offers the possibility to set a speed limit  
beyond which an acoustic warning signal will sound  
and the following warning message appears in the  
display of the instrument cluster.  
for the displayed driv-  
ing data, press button  
A repeatedly.  
To reset the memory,  
press and hold button  
Settings  
A .  
Setting the speed limit  
Select memory for driving data in the display of  
the instrument cluster via the multifunction steer-  
ing wheel and reset it  
Select Warning at or (depending on the display type)  
and confirm.  
When the vehicle is stationary, set the desired  
speed limit and confirm.  
While driving, drive at the desired speed and con-  
firm it as the speed limit.  
To select the memory  
for the displayed driv-  
ing data, press control  
wheel A repeatedly.  
Resetting the speed limit  
To resetthe memory,  
hold the dial A .  
Select Warning at or (depending on the display type)  
and confirm.  
To reset the speed limit, confirm the stored value.  
If the journey is interrupted for more than 2 hours,  
the set limit is deactivated, but the set value remains  
stored.  
Selecting the memory in the infotainment system  
To select the memory, use the functional areas  
in the following menu in the infotainment system:  
Vehicle status  
Display  
Menu item for driving data  
Or:  
Menu item for the driving data  
The vehicle status is displayed in the following menu  
in the infotainment system:  
Resetting the memory in the infotainment system  
The memory is reset in the following menu in the in-  
fotainment system:  
Menu item for the vehicle status  
Or:  
Menu item for the vehicle status  
Or:  
Settings  
Select driving data to be displayed  
The driving data to be displayed is selected in the  
following Infotainment menu:  
Or:  
A
B
Vehicle areas displayed in colour indicate associ-  
ated warnings  
Setting units  
The units are set in the following infotainment menu:  
No notification  
Warning messages regarding the vehicle con-  
dition and their quantity  
Or:  
C
Display of information about the condition  
of the START-STOP system  

Related Topics

Popular Owner Manuals