Driver information system for Your Skoda Kodiaq SUV Second Generation (2024-2026)

64 Driver information system › Analogue instrument cluster  
Outside temperature  
or - low outside temperature  
Total distance travelled  
D
Driver information system  
Analogue instrument cluster  
Overview  
E
F
Trip - Distance travelled after resetting the  
memory  
Overview of instrument cluster  
Overview of the main menu items  
Driving data » page 66, Overview  
Assist systems - Activate/deactivate assist sys-  
tems  
Navigation - e.g. Display driving recommendations,  
compass, list of destination  
Audio - Using radio and media  
Telephone - Call list, accept or reject an incoming  
call  
Vehicle - Vehicle condition » page 68, Display.  
Lap timer - Stopwatch » page 68, Usage.  
A
B
C
D
E
Tachometer with indicator lights  
Display  
Operation  
Speedometer with indicator lights  
Bar with indicator lights  
Multifunction button:  
Operation via the control lever  
A
Press - Switch be-  
tween menu  
Setting the time  
Reset odometer (trip)  
Show distance and days until next service ap-  
pointment  
items/set values  
Hold - Show main  
menu  
Press - Confirm the  
B
F
Coolant temperature gauge  
Fuel gauge  
menu item  
G
Operation via the multifunction steering wheel  
NOTICE  
Turn - Switch be-  
tween menu  
A
Risk of serious damage to the engine and the ex-  
haust system!  
Never run the fuel tank completely empty!  
items/set values  
Press - Confirm the  
menu item  
Press - Return to the  
menu one level high-  
er  
In poor visibility and with dipped headlights off,  
the brightness of the instrument cluster lighting is  
reduced to remind the driver to turn on the light.  
Display overview  
Hold - Show main  
menu  
Depending on the equipment, the following informa-  
tion is shown in the display.  
Press - Show previous menu (if one has been se-  
lected) / Show telephone menu  
Time  
A
B
Selected gear/gear  
recommendation  
Settings  
Also included de-  
pending on vehicle  
equipment:  
Setting the language  
The language is set in the Infotainment in menu  
.
Compass direction  
display  
Resetting the odometer  
Automatic gearbox  
selector lever posi-  
Briefly press the button in the instrument  
tions  
cluster.  
Detected road signs  
Menu, indicator lights and information  
C
Driver information system › Digital instrument cluster 65  
Setting the time  
Press and hold the button in the instru-  
Overview of the main menu items  
Driving data » page 66, Overview  
Assist systems - Activate/deactivate assist sys-  
tems  
ment cluster until the menu item Time is  
displayed.  
Navigation - e.g. Display driving recommendations,  
compass, list of destination  
Audio - Using radio and media  
Telephone - Call list, accept or reject an incoming  
call  
Release the button, the display shows the hour set-  
ting.  
Press the button repeatedly to set the hours.  
Wait 4 seconds, the display shows the minute set-  
ting.  
Vehicle - Vehicle condition » page 68, Display.  
Lap timer - Stopwatch » page 68, Usage.  
Press the key repeatedly to set the minutes.  
Wait 4 seconds, the display shows the initial set-  
ting.  
The time is also set in the Infotainment in menu  
.
Operation  
Rotate - Switch be-  
tween menu  
items/Set values/  
Manually change  
map scale  
Press - Confirm the  
menu item  
A
Setting the brightness of the instrument cluster  
lighting  
The brightness of the instrument lighting is adjusted  
automatically according to the given lighting condi-  
tions.  
When low beam is switched on, the brightness of  
the instruments lighting can be adjusted in the fol-  
lowing menu in the Infotainment system:  
Turn and press - Ac-  
tivate automatic  
map scale changing  
Press - Return to the menu one level higher  
Hold - Show main menu  
Or:  
Press - Change the variant of the display  
Hold - Display the menu of preset options with  
additional information  
Digital instrument cluster  
Overview  
Settings  
Overview of instrument cluster  
Setting the language  
The language is set in the Infotainment in menu  
.
Resetting the odometer in the instrument cluster  
Select Trip in the menu in instrument cluster display.  
Turn - Select infor-  
A
mation  
Press - Confirm in-  
formation  
Hold - Reset counter  
A
B
C
D
E
Bar with indicator lights  
Coolant temperature gauge  
Fuel gauge  
Display  
Additional information  
Central display area  
Setting the time  
The time is set in the Infotainment in menu  
.
F
Setting the brightness of the instrument cluster  
lighting  
The brightness is adjusted automatically according  
to the given lighting conditions.  
NOTICE  
Risk of serious damage to the engine and the ex-  
haust system!  
Never run the fuel tank completely empty!  
66 Driver information system › Driving data  
The brightness is adjusted with the dipped beam  
switched on in the infotainment in the following  
menu:  
Or:  
Menu item for the virtual cockpit  
Or:  
Set the variant of the display  
Press the button on the multifunction steering  
wheel to change the variant of the display presen-  
tation.  
Select displayed variants  
Select the desired additional information in the A  
Press and hold the button on the multifunction  
steering wheel.  
areas.  
The desired function area for the preselection op-  
Select and confirm the menu item for the display  
variants.  
tion in the area B hold to save the selection (the  
scope of the preset options depends on the type  
of Infotainment).  
Select one of the following variants of the display  
and confirm.  
Driving data  
Overview  
The driving data display works with the ignition  
switched on.  
In the instrument cluster display  
Depending on the equipment, the display of the in-  
strument cluster shows information such as speed,  
fuel consumption, range, etc.  
In Infotainment  
A
B
C
D
E
Classic display  
Advanced display  
Modern display  
Basic display  
Sporty display (depending on equipment)  
Choose display of additional information  
Press and hold the button on the multifunction  
steering wheel.  
Select and confirm one of the following prefix op-  
tions (the scope of the prefix options depends on  
the type of Infotainment):  
A
B
C
D
E
Distance travelled  
Driving time  
Average speed  
Auto - Information depending on the selected  
Average fuel consumption  
driving mode  
Classic - Information about the selected gear  
Evaluation of driving economy - Drive-  
GreenFunction (depending on Infotainment  
type) » page 173  
and the current speed  
Adjustable pre-selection options.  
F
Graphical fuel gauge - If the expected range is  
less than 300 km, the vehicle slowly approaches  
the symbol  
Setting the pre-selection option for the display of  
additional information  
The pre-selection option for displaying additional in-  
formation is set in the Infotainment system in the  
following menu:  
G
Range  
Menu item for the virtual cockpit  
Driver information system › Driving data 67  
Memory  
Select and reset the memory for driving data in  
the display of the instrument cluster using the  
control lever  
The system saves the driving data in the following  
memories:  
Since start  
To select the memory  
Driving data from the time of switching on the ig-  
nition until the ignition is switched off again is stor-  
ed in the memory. If the journey is interrupted for  
more than 2 hours, the memory will be reset.  
for the displayed driv-  
ing data, press button  
A repeatedly.  
To reset the memory,  
press and hold button  
Long-term  
The driving data of all trips up to a total of 99  
hours and 59 minutes driving time or 9999 km  
driving distance is stored in the memory. If one of  
the listed values is exceeded, the memory is reset.  
A .  
Select memory for driving data in the display of  
the instrument cluster via the multifunction steer-  
ing wheel and reset it  
Since refuel  
To select the memory  
Driving data from the time the fuel tank was last  
filled is stored in the memory. The memory is reset  
the next time the tank is filled.  
for the displayed driv-  
ing data, press control  
wheel A repeatedly.  
To resetthe memory,  
hold the dial A .  
Operation  
Display driving data in the display of the instru-  
ment cluster via the operating lever  
Select the menu item for the driving data in the  
main menu in the instrument cluster display.  
Selecting the memory in the infotainment system  
To select the memory, use the functional areas  
in the following menu in the infotainment system:  
Press - Select infor-  
mation/Set values  
Press - Confirm in-  
formation  
A
B
Menu item for driving data  
Or:  
Menu item for the driving data  
Display driving data in the display of the instru-  
ment cluster via the multi-functional steering  
wheel  
Resetting the memory in the infotainment system  
The memory is reset in the following menu in the in-  
fotainment system:  
Select the menu item for the driving data in the  
main menu in the instrument cluster display.  
Rotate - Select in-  
formation/Set values  
A
Or:  
Press - Confirm in-  
formation  
Settings  
Select driving data to be displayed  
The driving data to be displayed is selected in the  
following Infotainment menu:  
Displaying driving data in the infotainment system  
The driving data is displayed in the following menu in  
the infotainment system:  
Or:  
Menu item for driving data  
Or:  
Setting units  
The units are set in the following infotainment menu:  
Menu item for the driving data  
Or:  
68 Driver information system › Speed limit warning  
Activation/deactivation of information  
regarding the messages of the START-STOP  
system in another screen display  
Speed limit warning  
Usage  
The system offers the possibility to set a speed limit  
beyond which an acoustic warning signal will sound  
and the following warning message appears in the  
display of the instrument cluster.  
Functionality  
In the event of a system fault, messages regarding  
the fault in question are displayed on the instrument  
cluster display when the ignition is switched on.  
Settings  
Messages in relation to faults can also be displayed in  
the Infotainment.  
Setting the speed limit  
Select Warning at or (depending on the display type)  
and confirm.  
The warning messages will continue to be dis-  
played until the malfunctions have been remedied.  
After the first display of the message, only the indi-  
cator lights (Hazard) or (Warning) are dis-  
played.  
When the vehicle is stationary, set the desired  
speed limit and confirm.  
While driving, drive at the desired speed and con-  
firm it as the speed limit.  
Resetting the speed limit  
Stopwatch in the instrument cluster  
Usage  
Select Warning at or (depending on the display type)  
and confirm.  
To reset the speed limit, confirm the stored value.  
The function Laptimer offers the possibility to use up  
to 11 lap times, e.g. when driving on a race track, to  
measure and display in the display of the instrument  
cluster.  
If the journey is interrupted for more than 2 hours,  
the set limit is deactivated, but the set value remains  
stored.  
Vehicle status  
Display  
Operation  
Select Lap timer in the main menu in the instrument  
cluster display.  
The vehicle status is displayed in the following menu  
in the infotainment system:  
Displaying functions via the multifunction steering  
wheel  
Menu item for the vehicle status  
Or:  
Rotate - Select in-  
formation/Set values  
Press - Confirm in-  
A
Menu item for the vehicle status  
formation  
Displaying functions via the control lever  
Press - Select infor-  
A
mation/Set values  
Press - Confirm in-  
formation  
A
B
Vehicle areas displayed in colour indicate associ-  
ated warnings  
B
No notification  
Warning messages regarding the vehicle con-  
dition and their quantity  
Overview of functions  
Start time - start the timing manually / continue  
the interrupted measurement  
Since start - Start the timer automatically upon  
C
Display of information about the condition  
of the START-STOP system  
start-up  
Driver information system › Stopwatch in the Infotainment 69  
Statistics - Evaluate and reset the measured times  
Information Sport  
Settings  
Fastest - the fastest lap  
Slowest - the slowest lap  
Average - the average lap time  
Overall time - the total of all the lap times  
Reset - reset all measured times  
The Sport information is displayed in the following  
menu in the infotainment system:  
Sport  
New lap - Start measurement of the next lap time  
Split time - show the split time  
Stop - interrupt the time measurement  
Or:  
Sport  
A swipe of the finger vertically across the screen al-  
lows three of the following displays to be shown:  
Continue - Continue measurement of the current  
lap time  
Charging pressure  
Acceleration  
Output  
Coolant temperature  
Oil temperature  
New lap - Start measurement of the next lap  
time  
Abort lap - cancel the time without saving the  
measured time  
Exit - cancel the time and save the measured  
time  
Personalization  
Usage  
Stopwatch in the Infotainment  
Overview  
The personalization feature allows each vehicle key  
to be assigned a user account.  
The stopwatch display is shown in the menu in the  
Infotainment:  
In the user account, settings can be assigned regard-  
ing e.g. light function, driver's seat and exterior mir-  
ror position, assistance systems, radio, navigation,  
etc.  
Sport  
Or:  
Sport  
Functionality  
After opening the driver's door, all the personalised  
functions are adjusted according to the user account  
that is assigned to the key which was used to unlock  
the vehicle.  
There are three user accounts and a guest account.  
A change to the set personalised functions is auto-  
matically stored in the active user account.  
A
B
Overall time  
Start the measurement  
Stop the measurement  
Current lap time  
Change user account  
WARNING  
Risk of an accident!  
C
D
Evaluate/reset split times  
Carry out the account change while the vehicle is  
stationary.  
End the measurement (the current lap time is  
not stored)  
In the instrument cluster display  
Switching to a different user account is  
E
F
Start measurement of the next lap time  
The split time is briefly shown in the display A  
in the instrument cluster display within  
10 seconds after turning on the igni-  
tion.  
End the measurement (the current lap time is  
stored)  
In Infotainment  
The system settings are made in the Infotainment  
in the following menu: