Driver information system -> Driving data for Your Skoda Kodiaq SUV Second Generation (2024-2026)

66 Driver information system › Driving data  
The brightness is adjusted with the dipped beam  
switched on in the infotainment in the following  
menu:  
Or:  
Menu item for the virtual cockpit  
Or:  
Set the variant of the display  
Press the button on the multifunction steering  
wheel to change the variant of the display presen-  
tation.  
Select displayed variants  
Select the desired additional information in the A  
Press and hold the button on the multifunction  
steering wheel.  
areas.  
The desired function area for the preselection op-  
Select and confirm the menu item for the display  
variants.  
tion in the area B hold to save the selection (the  
scope of the preset options depends on the type  
of Infotainment).  
Select one of the following variants of the display  
and confirm.  
Driving data  
Overview  
The driving data display works with the ignition  
switched on.  
In the instrument cluster display  
Depending on the equipment, the display of the in-  
strument cluster shows information such as speed,  
fuel consumption, range, etc.  
In Infotainment  
A
B
C
D
E
Classic display  
Advanced display  
Modern display  
Basic display  
Sporty display (depending on equipment)  
Choose display of additional information  
Press and hold the button on the multifunction  
steering wheel.  
Select and confirm one of the following prefix op-  
tions (the scope of the prefix options depends on  
the type of Infotainment):  
A
B
C
D
E
Distance travelled  
Driving time  
Average speed  
Auto - Information depending on the selected  
Average fuel consumption  
driving mode  
Classic - Information about the selected gear  
Evaluation of driving economy - Drive-  
GreenFunction (depending on Infotainment  
type) » page 173  
and the current speed  
Adjustable pre-selection options.  
F
Graphical fuel gauge - If the expected range is  
less than 300 km, the vehicle slowly approaches  
the symbol  
Setting the pre-selection option for the display of  
additional information  
The pre-selection option for displaying additional in-  
formation is set in the Infotainment system in the  
following menu:  
G
Range  
Menu item for the virtual cockpit  
Driver information system › Driving data 67  
Memory  
Select and reset the memory for driving data in  
the display of the instrument cluster using the  
control lever  
The system saves the driving data in the following  
memories:  
Since start  
To select the memory  
Driving data from the time of switching on the ig-  
nition until the ignition is switched off again is stor-  
ed in the memory. If the journey is interrupted for  
more than 2 hours, the memory will be reset.  
for the displayed driv-  
ing data, press button  
A repeatedly.  
To reset the memory,  
press and hold button  
Long-term  
The driving data of all trips up to a total of 99  
hours and 59 minutes driving time or 9999 km  
driving distance is stored in the memory. If one of  
the listed values is exceeded, the memory is reset.  
A .  
Select memory for driving data in the display of  
the instrument cluster via the multifunction steer-  
ing wheel and reset it  
Since refuel  
To select the memory  
Driving data from the time the fuel tank was last  
filled is stored in the memory. The memory is reset  
the next time the tank is filled.  
for the displayed driv-  
ing data, press control  
wheel A repeatedly.  
To resetthe memory,  
hold the dial A .  
Operation  
Display driving data in the display of the instru-  
ment cluster via the operating lever  
Select the menu item for the driving data in the  
main menu in the instrument cluster display.  
Selecting the memory in the infotainment system  
To select the memory, use the functional areas  
in the following menu in the infotainment system:  
Press - Select infor-  
mation/Set values  
Press - Confirm in-  
formation  
A
B
Menu item for driving data  
Or:  
Menu item for the driving data  
Display driving data in the display of the instru-  
ment cluster via the multi-functional steering  
wheel  
Resetting the memory in the infotainment system  
The memory is reset in the following menu in the in-  
fotainment system:  
Select the menu item for the driving data in the  
main menu in the instrument cluster display.  
Rotate - Select in-  
formation/Set values  
A
Or:  
Press - Confirm in-  
formation  
Settings  
Select driving data to be displayed  
The driving data to be displayed is selected in the  
following Infotainment menu:  
Displaying driving data in the infotainment system  
The driving data is displayed in the following menu in  
the infotainment system:  
Or:  
Menu item for driving data  
Or:  
Setting units  
The units are set in the following infotainment menu:  
Menu item for the driving data  
Or: