Storage space and interior equipment › 12-Volt power socket 231
Adjust size
Press on the adapter
and remove it.
›
Pull out the locking tab
›
and move the upper
part of the holder to
the desired position.
Set the minimum size of
the empty holder to
avoid noise while driving.
Technical data
Removal and Insertion
The holder is for fixing a tablet with a height of min.
11.5 cm and max. 19.5 cm.
Fasten behind the headrests
The maximum load for the holder is 0.75 kg.
Place the open adapter
on the front guide rods
of the headrest and
clip in carefully.
›
12-Volt power socket
Operating conditions
NOTICE
Risk of damage to the electrical system of the vehi-
cle!
Use the sockets only for the connection of ap-
proved electrical accessories with a total power
consumption of up to 120 watts.
▶
Clip in the holder in the
adapter.
›
NOTICE
Danger of damage to the connected consumers!
Switch off the consumers before switching the ig-
nition on or off and before starting the engine.
▶
230-Volt power socket
Functionality
Removal
NOTICE
Press the safety button
and unfold the holder.
›
Danger of damage to the connected consumers!
Do not connect a light with fluorescent lamp to the
▶
socket.
Switch off the consumers before switching the ig-
nition on or off and before starting the engine.
▶
Status display
Lit up in green - the socket is switched on.
▶
Blinking green - the socket is still switched on for
about 10 minutes after the engine has been
switched off, if a consumer was connected before
the engine was switched off.
▶
The socket has a child safety lock. When insert-
ing the plug, the fuse is unlocked and the socket is
switched on.
English 
