222 Storage space and interior equipment › Variable loading floor in the boot
Insert the cover into
the recesses of the
side panel.
Close the side pockets.
Restore the original
To set in the upper po-
sition, position the vari-
able loading floor in the
front area on area A .
›
›
›
›
›
To set in the lower po-
sition, position the vari-
able loading floor in the
front area in space B .
position of the variable
loading floor.
Press the variable load-
ing floor forward and
hang up.
›
Variable loading floor in the boot
Setting the position
The maximum load of the rear plate in the upper po-
sition is 25 kg. The maximum load of both plates in
the upper position is 75 kg in total.
Five-seater version of the vehicle – the variable load-
ing floor consists of two parts.
Dividing the boot
Seven-seater verison of the vehicle – the variable
loading floor consists of one part.
Lift the rear plate of
the variable loading
floor.
Push the plate into the
grooves A .
›
›
For vehicles with a two-part variable loading
floor, one side of the rear panel may be made of fab-
ric and the other side may be washable.
In vehicles with an emergency wheel or vehicle
12-Volt battery under the floor covering in the lug-
gage compartment, the variable loading floor cannot
be adjusted to the lower position.
For vehicles with an emergency wheel under the
floor covering in the luggage compartment, the max-
imum load on the floor covering is 5 kg.
Fold the front plate up and back
Lift the plate. The plate
is inserted into the
grooves A .
›
Set the variable loading floor to the upper or lower
position
The front and rear plates of the variable load floor
can be adjusted to the upper or lower position. The
handling of the two panels is identical.
Folding it back takes
place in reverse order.
›
Lift the variable load
floor and pull it to-
›
wards you.
English 
