212 Wheels › Spare and emergency spare wheel
When replacing SEAL tyres with standard tires, the
vehicle must have one of the following pieces of
equipment.
Remove the wheel on vehicles with sound
system and replace
Removing
Spare or emergency spare wheel with correspond-
ing tool for replacing it.
▶
Partially pull out the
safety tab A .
›
Breakdown kit.
▶
Press the safety button
and remove the plug.
›
Spare and emergency spare wheel
Overview
Spare wheel
The dimensions of a standard spare wheel corre-
spond to the dimensions of the wheels mounted
on the vehicle.
A temporary spare wheel is provided with a warn-
ing label on the rim. This wheel is intended to ena-
ble you to reach the nearest specialist garage.
▶
Unscrew the lock nut.
Remove the bass loud-
speaker.
Take out the wheel.
›
›
▶
›
Inflate a space saver wheel with the maximum pre-
scribed pressure.
Emergency wheel
A warning label is displayed on the rim of the tempo-
rary spare wheel. This wheel is intended to enable
you to reach the nearest specialist garage.
Inserting
Insert the wheel into the wheel well with the out-
side facing downwards.
›
An emergency wheel is significantly narrower than
the wheels mounted ex-factory.
Insert the bass loudspeaker.
Screw in the locknut until it stops.
Insert the connector in the bass loudspeaker.
› Secure the safety tab A .
›
›
Remove the wheel on vehicles without sound
system and replace
›
The spare wheel or emergency wheel is mounted in a
recess under the floor covering or the variable load-
ing floor in the boot.
Changing the wheel and raising the
vehicle
Removing
What you should be mindful of
Loosen the retaining
belt and take out the
box with the tool kit.
Unscrew the lock nut.
Take out the wheel.
›
Before changing
Park the vehicle securely and secure it from rolling
away.
›
›
›
Turn off the engine.
Let all of the occupants get out. During the wheel
change they should not stand on the road, e.g. be-
hind the crash barriers.
›
›
Close all doors, the boot and bonnet.
Uncouple any trailers.
›
›
Inserting
Insert the wheel into the wheel well with the out-
side facing downwards.
›
Pull the fixing band through the opposite holes in
the wheel rim.
›
Screw in the locknut until it stops.
Replace the box with the tool kit into the wheel
and secure it with the tape.
›
›
English 
