Get Infotainment Bolero Guide for Skoda Octavia 4 Door Fourth Generation (2021-2026)

Infotainment Bolero › Infotainment overview 85

Volume adjustment of individual Infotainment

functions

▶

Infotainment Bolero

Infotainment overview

The volume can be adjusted on e.g. one of the fol-

lowing menu items:

▶

Volume adjustment of voice commands

▶

Setting the maximum volume when Infotainment

is turned on

Speed-dependent volume setting

▶

Setting the Infotainment to mute with the park-

ing aid switched on

Depending on the equipment, the following ad-

vanced sound settings can be set

Setting space optimisation

Setting the audio proﬁles according to genre

Adjusting the subwoofer volume

▶

A Touchscreen

B Sensor ﬁelds

Conﬁguration wizard

The conﬁguration wizard helps to set certain Info-

tainment functions.

▶

- Preferred menus

▶

- All menus

The conﬁguration wizard is automatically displayed if

the ignition is switched on and if there are at least

two menu items that have not been set after switch-

ing on the Infotainment.

C Progress bar for volume adjustment

Condition-based:

▶

Infotainment switched oﬀ

To switch oﬀ the automatic display, when the

conﬁguration wizard is displayed tap Don't show again

›

▶

Tap: Turn on Infotainment

Infotainment switched on

.

▶

For manual display, tap

Conﬁguration wizard

.

›

▶

Tap: Switch sound oﬀ/on

Hold: Switch oﬀ Infotainment

Set up menu HOME

▶

To display another page of the HOME menu, press

the screen and drag to the left or right.

›

Add a preferred menu

System

To display the editing mode hold a ﬁnger on the

›

screen.

Restriction

Tap a free space with functional areas.

Select a menu with the desired dimension of the

functional surface.

›

For safety reasons, operation of some Infotainment

functions while driving is not possible or is restricted.

The Infotainment system indicates this by means of

a message in the screen.

The Infotainment only oﬀers font sizes that corre-

spond in dimension to the ﬁelds with functional

areas that are currently free.

To end edit mode, tap

.

›

Basic settings

Remove the preferred menu

Setting basic functions

The following Infotainment functions are set in the

To display edit mode, press and hold the screen

with one ﬁnger.

›

menu:

Tap on the desired menu.

›

Time and date

Language

Units

▶

To end edit mode, tap

.

Add/remove one side of the HOME menu

To display edit mode, press and hold the screen

with one ﬁnger.

›

Restore factory settings

Tap on

To add another page, tap

.

Sound settings

The Infotainment sound is set in the menu

›

.

The following menu items can be set:

The maximum number of pages is 4.

Tap to remove a page.

Setting the equalizer

Adjusting the volume ratio

›

▶

The minimum number of pages is 2.

86 Infotainment Bolero › Screen

Tap to return to the edit mode.

›

C

D

Display/close the submenu window

Display of the Infotainment control centre

Set up menu MENU

The position of the functional surfaces in the MENU

menu can be customized as follows:

Operation

Press and hold the desired functional surface until

it is free.

Move the functional surface to a diﬀerent position.

›

NOTICE

Danger of screen damage!

›

The Infotainment screen is operated by touching it

lightly with your ﬁnger.

▶

Factory settings

Resetting the Infotainment to factory defaults re-

stores all factory defaults.

In principle, operation by touch is identical to the op-

eration of a mobile phone.

Turn on the ignition and switch on Infotainment.

›

Tap on

.

The following operating modes are speciﬁc to the In-

fotainment system.

Reset to factory settings select and conﬁrm the reset.

To check the factory reset was successful, we

recommend that you check all user accounts have

been deleted.

Tap

Select function or

menu item

▶

Troubleshooting

Infotainment not responding

If the infotainment does not respond, restart it as

follows:

Hold call

Hold for longer than 10 s.

Wait for the restart to complete.

›

Zoom into the map

▶

System update

We recommend having the system update carried

out by a specialist company.

Dragging up or down with two ﬁngers

The system update ensures optimal function of the

Infotainment system, e.g. compatibility with new

phones.

Quickly look through

▶

the lists

Determine system version

Switch 2D/3D map dis-

play

▶

Tap

System information.

›

Screen

Pulling apart with two ﬁngers

Overview

Zoom into the map

▶

A

B

Status bar

Bar with the functional surfaces of the displayed

menu

Infotainment Bolero › Infotainment keyboard 87

Pulling together with two ﬁngers

Infotainment keyboard

Keypad overview

Zoom out of the map

▶

The arrangement of the keyboard characters de-

pends on the set infotainment language.

Depending on the context, the following types are

used in infotainment:

Alphanumeric

Numeric

Keyboard for input

Keyboard for search

▶

Turn two ﬁngers

Rotate the map

Press and hold

Release certain Info-

tainment menus with

the option to move

them to another loca-

tion on the screen

Keypad example

A

Input line

Touch the input line to display function areas

for moving the cursor

▶

Contactless gesture control

Some Infotainment menus can be controlled by hand

gestures.

▶

Delete characters before the cursor

▶

Tap: delete the last entered character

▶

Gesture control is ach-

ieved by slowly moving

the hand back and

forth approximately 8

cm above the lower

edge of the screen.

›

Hold: delete all entered characters in se-

quence

▶

Delete all entered characters

B

Entries searched for

▶

Show list of searched entries

C

Keypad functional surfaces

Depending on the set-

ting, a recognized ges-

ture can be conﬁrmed acoustically and animated.

▶

Change sentence case

▶

Switch to the language keypad

Displaying operation help

▶

/

Switch to the numeric/character key-

Tap on

.

›

board

▶

/

Switch to other character variants

Show additional keypad languages

Display the entered password

Settings

The following basic screen functions are set in the

/

Conﬁrm the characters that have been

menu

Screen:

entered

Image of the screen background

Brightness level of the screen

Switch oﬀ the screen

Display the time

Conﬁrmation sounds and animations

▶

88 Infotainment Bolero › Voice control

Numeric keypad

Setting additional keypad languages

For Settings

Select the desired language.

, tap Additional keypad languages.

›

Voice control

Functionality

Voice control principle

Voice control works according to the principle of

dialogue between the user and the Infotainment sys-

tem.

Keypad example

A Input line

Touch the input line to display function areas

for moving the cursor

▶

The user says a voice command. The Infotainment

system responds or executes the voice command.

▶

Delete characters before the cursor

It is possible to interrupt a dialogue at any time and

issue a new statement without having to wait for a

complete response.

▶

Tap: delete the last character

▶

Hold: delete all characters

B Keypad functional surfaces

Advanced voice control

The advanced voice control of the vehicle enables an

online search and operation of the vehicle functions.

Conﬁrm the characters that have been entered

If context-sensitive, alphanumeric characters can

be entered by holding a functional surface with a

digit.

The advanced voice control understands ﬂuently

spoken, complete sentences. You do not need to use

set commands or phrases.

The advanced voice control can, for example, search

for special destinations or dictate SMS messages if

the connected telephone makes this possible.

Operation

The Infotainment keypad is used to enter characters,

letters and numbers.

This function allows you to combine the search in

the online and oﬄine data of the Infotainment. The

transition between online and oﬄine search is seam-

less and imperceptible to the user.

The keypad will be automatically displayed when In-

fotainment prompts for characters.

Search

When entering characters, corresponding entries are

searched for.

Operating conditions

✓ Ignition on

✓ Infotainment switched on

The entry to be searched for can be entered includ-

ing diacritics.

The keyboard will only provide characters that

match the stored entries.

Operating conditions for advanced voice control

To use the advanced voice control, the following

conditions must also be met:

To display searched entries tap

.

›

✓ The vehicle supports the function.

✓ The vehicle has Infotainment and functions that

can be controlled by the advanced voice control.

✓ The ŠKODA Connect services are active.

✓ The vehicle is within range of a contractual mo-

bile network, through which the connection to

ŠKODA Connect Services is ensured.

The number of searched entries is displayed above

the symbol

.

Show additional keypad languages

To use the additional keypad languages, the desired

languages must be set ﬁrst.

To use, repeatedly tap on the keyboard or on the

ﬂag icon until the desired language keyboard is dis-

›

✓ The level of protection of personal data is set to

played.

Share my position

.

Further character variants

Requirement for recognition of the activation

command

Press and hold the character with the other char-

acter variant.

›

✓

Activated menu item

Voice control Active

Select the desired symbol.

›

Infotainment Bolero › Control centre 89

The messages are generated by Infotainment. Flaw-

less clarity (e.g. road or city name) cannot always be

guaranteed.

Operation

Switch on voice control

Press the button on the multifunction steering

wheel.

›

You cannot use voice control while a phone call is in

progress.

Or:

Say the activation command “OK Laura”.

›

Settings

After switching on, the icon is displayed.

The following voice control functions are set in the

Enter voice command

menu

Voice control:

Speak a voice command with voice control switch-

ed on.

›

Conﬁrmation tones

Enable/disable use of the activation word.

▶

During recognition of the voice command, the

icon is displayed.

The Infotainment system then executes the voice

command or plays the message. During the message,

the icon is displayed.

Self-help

Starting acoustic help

If the Infotainment system is expecting a voice

command, say “Help”.

›

After the execution of the voice command, voice

control is switched oﬀ.

The “Help” voice command can be issued repeatedly

for further tips on voice control.

Correcting a voice command

During voice command input, press the button

on the multifunction steering wheel and say a new

voice command.

›

Displaying the help

Tap on

.

›

Or:

Stopping voice control

Stopping leaves more time for voice command input,

e.g. for searching for a phone contact.

If Infotainment is expecting a voice command, say

›

“Overview”.

Move your ﬁnger up or down over the Infotain-

ment screen.

›

Control centre

Overview

Or:

Say the voice command “pause”.

›

Display of the control centre

Resuming stopped voice control

Press the button on the multifunction steering

wheel.

›

Press the bar at the

top of the screen and

drag down.

›

Or:

Tap on in the Infotainment screen.

›

Stopping the played back message

Press the button on the multifunction steering

wheel.

›

Closing the control centre

Press the bar at the bottom of the screen and drag

up.

›

Ending voice control

Press the button on the multifunction steering

›

wheel twice.

Or:

Wait 5 seconds.

›

Say the voice command “cancel” during voice com-

›

Control Centre

The Infotainment control centre can be used for

quick access to the following functions:

mand input.

Restriction

For some Infotainment languages, there is no voice

control available. The Infotainment system will indi-

cate this.

90 Infotainment Bolero › Radio

Analogue and digital radio player

A

Display and administration of functional surfaces

of preferred features.

A

Radio station logo

B

C

D

E

Display list of informational messages.

Preferred functions

Switch to the previous/next station

The type of switching depends on how the ar-

/

row buttons are set up

Radio Arrow buttons:.

Display user account management.

Setting the personal data protection level.

Setting the instrument and key illumination.

Switching the SCAN function on / oﬀ

Activate/deactivate muting

Close player

F

List of available analogue and digital radio stations

Set functional surfaces of preferred features

To display, tap on

.

›

To display the edit mode, tap on the empty func-

›

Tap on

.

tional surface with the icon or hold down the oc-

cupied functional surface.

Select FM/DAB or AM.

To add the preferred feature, hold down the func-

›

tional surface of the desired function and move it

from the lower part of the screen to the functional

surface in the upper part of the screen.

To close edit mode, tap on

.

›

Radio

Overview

A List of available stations

Display menu

Show available frequency ranges

After selecting a frequency range, the desired

station must still be selected

Tap

.

›

Display the player

Select frequency range

Tap on

.

›

After selecting a frequency range, the last station

to be played in the respective frequency range is

set.

Press the bar button

on the right edge of

the screen and drag to

the left.

Station currently being played

Station stored on the presets

A traﬃc radio station is set

Close player

Tap on

The DAB transmitter emits images which are dis-

played in the information to the station

.

›

Or:

Manual update of the station list

Press the bar button on the left edge of the player

and drag to the right.

›

In the station list, information about the pro-

gramme type and the channel identiﬁcation of the

regional channel can be displayed.

Web radio player

To select a web radio station, in the Radio menu

›

tap Web radio

.

Infotainment Bolero › Radio 91

Tap: Go forward 15 secs

Select a web radio station from the displayed lists.

›

Or:

Tap on to search for a web radio station.

Display related web radio stations and podcasts

View episodes of the podcast being played

Close player

›

When the icon is displayed, no Internet con-

nection is available.

List of web radio stations and podcasts

To display the list, in the Radio menu

tap

›

Web radio

.

A

Station name

B

Information about the broadcast content

Station logos

C

Switch to the previous/next station

/

The type of switching depends on how the ar-

row buttons are set up

Radio Arrow buttons:.

Display related web radio stations and podcasts

Close player

Search for web radio stations and podcasts

Recently played web radio stations and podcasts

100 most popular web radio stations depending

on the Infotainment language that has been set

When the icon is displayed, no Internet con-

nection is available.

Go to podcasts and select

Podcast player

Search for and select web radio stations and pod-

casts based on the selected country

To select a podcast, in the Radio menu tap

›

Web radio

.

Select a podcast from the displayed lists.

Search for and select web radio stations and pod-

casts based on the selected language

›

Or:

Tap on to search for podcasts.

Search for and select web radio stations and pod-

casts based on the selected genre

›

The podcasts are shown in the displayed lists

with the icon

The podcasts are shown in the displayed lists

.

with the icon

.

Preset buttons for favourite stations and podcasts

The preset buttons can be used to store stations

from all available frequency ranges as well as web ra-

dio stations and podcasts.

Tap on

.

›

A

B

C

Podcast name

Information about the broadcast content

Podcast logo

Tap: start playback

Tap: pause

Switch to the previous/next station

Store current station or podcast

/

The type of switching depends on how the ar-

Switch edit mode on/oﬀ

row buttons are set up

Radio Arrow buttons:.

▶

- Delete all preset buttons for preferred sta-

Tap: Go back 15 secs

tions and media

92 Infotainment Bolero › Radio

Covering the panes with foils or metal-coated la-

bels may aﬀect the reception of the radio signal.

The ŠKODA AUTO company assumes no responsi-

bility for the availability, correct functioning and

broadcast information of the RDS service.

▶

- Delete the desired preset button

▶

- Change logo

▶

The position of the stored preset buttons can be

changed.

Tap on

.

›

Press and hold the desired preset button until it is

free.

Settings

Store the current station to a preset button for

preferred stations

Move the preset button to a diﬀerent position.

›

To store, tap on

in the Radio menu.

›

Operation

Store stations to a preset button for favourite sta-

tions from the list of available stations

SCAN function

To display the station list, tap on in the Radio

menu.

›

The function plays receivable stations of the selec-

ted frequency range in succession for a few seconds

each.

Hold the line with the name of the desired station.

Tap on or the preset button for favourite sta-

tions that you want to replace.

›

Display the radio player.

To Start automatic play, tap

To End automatic play, tap

›

.

Delete the stored preset button for the favourite

station

.

Find stations manually

Manual search is available for AM and FM stations.

To erase, tap on

in the Radio main menu.

›

▶

To delete one preset button, tap on

.

Display list of available sensors.

›

▶

To delete all preset buttons, tap on and conﬁrm

Tap on

.

the deletion.

For FM stations, the functional area is available

Functional areas

dios

Applies to AM, FM and DAB frequency ranges.

/

for analogue and digital ra-

when the

radio Station display: FM menu

item is set.

The variant for changing stations in the radio player

is set as follows using the functional areas / :

In the menu Radio

Radio Changing the station:

.

›

Select the variant for switching between the sta-

tions stored on the station buttons or the stations

stored in the list of available stations.

Functional areas

podcasts

Applies to web radio stations and podcasts.

for web radio stations and

Switch to the previous/next available station

Look for each other

/

The variant for changing stations using functional

areas

/

in the Radio menu, is set as follows:

A

Store the currently selected station on a station

key for the preferred station.

In the menu Radio

Changing the station:

.

›

Select the variant for switching between the sta-

tions stored on the station keys or the last web

stations and podcasts listened to.

Hold down the scroll mark on the frequency

range scale and move it to the desired value.

Switch traﬃc reception (TP) for stations on/oﬀ

Applies to FM and DAB frequency range.

Restriction

In the Radio main menu, tap

.

›

Infotainment supports digital radio reception in

DAB and DAB+ formats.

Car parks, tunnels, tall buildings or mountains can

restrict radio reception.

In the rear side windows, there are antennas for re-

ceiving the radio signal.

▶

Radio Traﬃc program (TP)

.

Switch RDS on/oﬀ

Applies to the FM frequency range.

The menu item is only available for some countries.

In the Radio main menu, tap

.

›

Infotainment Bolero › Radio 93

Infotainment oﬀers the option of adding logos,

which are stored in the Infotainment memory, to the

stations.

Radio Radio Radio Data System (RDS)

.

›

If the RDS function is disabled, the following menu

items in FM station settings are not available:

In the menu Radio

the desired frequency range.

Radio Station logos and select

›

Traﬃc program (TP)

Radio text

RDS Regional

Automatic frequency change (AF)

Regional station logo.

▶

Or:

In the list of preferred stations, tap on

desired preset button.

at the

›

Select the desired logo.

Switch automatic frequency control (AF) on/oﬀ

Applies to the FM frequency range.

To turn oﬀ the logo display, tap on in the list of

available logos.

When the function is switched on and the signal of

the FM station currently being listened to is weak,

Infotainment automatically sets the same station to

a diﬀerent frequency with a better signal.

Switch adding automatic station logos on/oﬀ

Applies to the FM and DAB frequency ranges.

When the function is switched on, a station logo

from the Infotainment memory is added when the

station is stored on a preset.

In the Radio main menu, tap

Radio Automatic frequency change (AF)

.

›

.

In the Radio main menu, tap

Radio Tap Automatic selection of station logos

.

›

Display the set station in the instrument cluster

display

.

Select the menu in which the travel time and the

travelled distance are displayed.

›

Regional FM station logo

Applies to the FM frequency range.

Hold the button on the multifunction steering

wheel for at least 5 seconds.

›

Infotainment provides the option of using country-

speciﬁc FM station logos.

When the button is released, a menu is displayed.

In the Radio main menu, tap

Radio Region for station logo:

.

›

In the menu, select menu item Info when changing tracks

.

›

.

Automatic change of frequency to a regionally

linked FM station

Applies to the FM frequency range.

Switching additional announcements of the DAB

transmitter on / oﬀ

Applies to the DAB frequency range.

Infotainment provides the option of automatically

switching to a regionally linked FM station in case of

signal loss of the FM station being listened to.

When the function is switched on, other announce-

ments are received as traﬃc announcements. These

include e.g. weather news, sports reports, ﬁnancial

news etc.

In the Radio main menu, tap

.

›

Radio RDS Regional:

.

In the Radio main menu, tap

Radio Tap Additional DAB announcements

.

›

Select one of the following menu items:

▶

Fix - When the signal is lost, another station must

Displaying FM / DAB stations or FM stations in the

list of available stations

Applies to the FM and DAB frequency ranges.

be set manually.

Automatic - automatic selection of the station with

▶

the best signal reception.

Depending on the following setting, the stations of

the selected frequency range are displayed in the list

of available stations.

If reception is lost in the given region, Infotain-

ment will automatically set another available region.

Turn on/oﬀ radio text reception

Applies to the FM and DAB frequency ranges.

In the Radio main menu, tap

.

›

Radio Station display:

.

When the function is switched on, you can see more

information about the content broadcast from the

station to which you are listening.

Select one of the following menu items:

▶

FM/DAB - the list shows available FM and DAB sta-

tions.

In the Radio main menu, tap

.

›

▶

FM - the list shows available FM stations.

Radio Radio text

.

Switch automatic switching to a similar DAB trans-

mitter on / oﬀ

Applies to the DAB frequency range.

Add the station logo

Applies to the FM and DAB frequency ranges.

94 Infotainment Bolero › Media

When the function is switched on and there is signal

loss from the DAB station being listened to, Infotain-

ment automatically sets another DAB station with

similar content.

Media player

In the Radio main menu, tap

Radio Tap Switch to a similar station if weak reception

.

›

.

Sound quality of web radio stations and podcasts

Applies to web radio stations and podcasts.

To adjust the sound quality, tap on

the Radio main menu.

Audio quality: in

›

A Available information about the track, artist and

album being played

Choose low or high quality.

›

The quality you set aﬀects the amount of data used

in the data connection.

B Album image

Close player

Quality also depends on the speed and availability of

the data connection.

Video player

If playback failure occur, reduce the sound quali-

ty.

Media

What you should be mindful of

Do not save any important data or that which has

not been backed up on the connected audio sour-

ces. ŠKODA assumes no responsibility for lost or

damaged ﬁles or connected audio sources.

When changing or connecting an audio source, this

may cause sudden changes in volume. Reduce the

volume before changing or connecting an audio

source.

When connecting an audio source, the source in-

formation messages can be displayed. These mes-

sages must be observed and, if necessary, con-

ﬁrmed.

The national copyright laws that apply in your

country must be observed.

▶

A Name of the track being played

Zoom out of/in to picture display

Close player

Media list

Overview

A Select source

Display the player

B Multimedia database, divided into music, videos

and playlists

Tap on

.

›

Press the bar button

on the right edge of

the screen and drag to

the left.

C List of connected mobile devices

Show available sources

Preferred media

The currently played media can be stored on the pre-

set buttons for preferred media.

Close player

Tap on

.

›

Depending on the available information, the track,

the album, the artist name and the allocated genre

can be stored.

Or:

Press the bar button on the left edge of the player

and drag to the right.

›

To display tap on in the Media menu.

›

Infotainment Bolero › Media 95

Control playback.

Change the order of a title in the list by holding and

moving to the desired position.

▶

Operation

Operation - Basics

Tap: start playback

Tap: pause

▶ Delete track by tapping on

.

Within 3 seconds of starting playback, tap:

play the previous song

Restriction

After 3 seconds from the start of playback,

tap: to play the current title from the begin-

ning

Hold: fast rewind within the title

Tap: play the next song

The availability of some media operation functions is

dependent on the connected source and the soft-

ware being used, e.g. Bluetooth®.

Hold: fast forward within the title

Settings

Movement within the title is also possible by

dragging the ﬁnger over the timeline.

Manage favourites

To save the preferred medium, tap on

Media

›

in the menu.

Advanced operation

Turn on / oﬀ repeat playback of the current

track

› ^{Select a menu item from the following menu}A .

Turn on / oﬀ repeat playback of the current al-

bum / folder

Turn on / oﬀ random playback of the current al-

bum / folder

Save the played track in the “My playlist” playlist

“My playlist” management

To store the currently playing track to the play-

list, tap on in the media player.

›

To display the playlist, tap on

Tap on until the media list for the current source

is displayed.

.

›

To delete a preferred menu item, tap on

in the Media menu and conﬁrm the deletion.

To delete all preferred menu items, tap on

in the Media menu and conﬁrm the deletion.

›

Tap on

.

›

To manage the playlist tap in the displayed play-

list.

Traﬃc

To turn on/oﬀ traﬃc monitoring during playback

of media ﬁles, go to the Media in the main menu

›

The following activities can be carried out in playlist

management:

and tap on Traﬃc program (TP)

.

Supported sources and ﬁles

96 Infotainment Bolero › Media

Supported sources

Source

Interface

Type

MSC

Speciﬁcation

File system

USB stick

HDD

(without special

software)

USB devices that

use the USB mass

storage support

protocol

Devices running

the Android or

Windows Phone

operating system

that support the

Media Transfer

Protocol

VFAT

FAT16

FAT32

exFAT

NTFS

USB 1.x; 2.x 3.x

or higher with USB

2.x support

USB

MTP

Devices with the

iOS operating sys-

tem and the iAP2

protocol

Bluetooth® proto-

cols

Apple

-

HFS+

-

Bluetooth® player

Bluetooth®

A2DP and AVRCP

(1.0 - 1.6)

Compatibility of mobile devices

It is possible to check the ŠKODAweb pages to see if Infotainment is compatible with the selected mobile

device being tested. This check is carried out by using the following reference or by reading the QR code:

http://go.skoda.eu/compatibility

All information given is incidental and serves as information.

The ŠKODA AUTO company cannot guarantee full functionality and compatibility, e.g. due to a software up-

date of the Infotainment and the mobile devices.

Supported audio ﬁles

Compression for-

mat

Codec type

File exten-

sion

Max. bit rate

[kbps]

Max. sam-

pling rate

[kHz]

Multi channels

MPEG 1 Layer 2

MPEG 2 Layer 2

MPEG 1 Layer 3

MPEG 2 Layer 3

MPEG 2.5 Layer 3

32 - 384

8 - 160

32 - 320

32, 44, 48

16, 22, 24

32, 44, 48

16, 22, 24

8, 11, 12

Mono, stereo,

Joint stereo

Mono, dual mono,

Stereo, Joint

Stereo

mp2

mp3

MPEG

8 - 160

Infotainment Bolero › Media 97

Compression for-

mat

Codec type

File exten-

sion

Max. bit rate

[kbps]

Max. sam-

pling rate

[kHz]

Multi channels

Windows Media

Audio 7

Windows Media

Audio 8

Windows Media

Audio 9 and 9.1

Windows Media

Audio 9.2

Windows Media

Audio 10

8, 16, 22, 32,

44, 48, 96

6 - 192

8 - 384

8 - 768

8 - 320

32 - 768

8, 11, 16, 22,

32, 44, 48,

96

Mono, stereo,

Joint stereo

WMA

ADTS

wma

aac

32, 44, 48,

96

22, 24, 32,

44, 48

16, 22, 24,

32, 44, 48

22, 24, 32,

44, 48

16, 22, 24,

32, 44, 48

8, 11, 12, 16,

22, 24, 32,

44, 48, 96

8, 11, 12, 16,

22, 24, 32,

44, 48, 64,

88, 96, 192

8, 11, 12, 16,

22, 24, 32,

44, 48, 96

AAC LC

16 - 2048

Stereo

AAC HE

AAC HEv2

M4A LC

16 - 400

16 - 64

8 - 576

MP4

OGG

FLAC

m4a

ogg

ﬂac

M4A HE

M4A HEv2

Mono,

Stereo

OGG-Vorbis

FLAC

Mono, stereo,

Joint stereo

-

Mono,

Stereo

RIFF

Monkey's

SBC

WAV

wav

ape

-

64 - 3072

8 - 192

Monkey's

8, 11, 12, 16,

22, 24, 32,

44, 48

Mono, stereo,

Joint stereo

Bluetooth A2DP

8 - 345

Mono, stereo,

Multichannel

OPUS

opus

6 - 2000

8 - 48

Files that are protected by DRM- and iTunes® methods are not supported by Infotainment.

Supported video ﬁles

Codec type

File extension

Max. recordings per second bit rate

[Mbit/s]

mpg

mpeg

m1v

mPV

mpg

mpeg

ps

MPEG 1

1.5

15

MPEG 2

m2v

m4p

mp4

m4v

mp4v

mov

Xvid

MPEG 4 (H.264)

MPJEG

50

20

MPEG 4 (ISO)

Xvid

98 Infotainment Bolero › Mobile device management

Codec type

WMV9

File extension

Max. recordings per second bit rate

[Mbit/s]

wmv

asf

50

Supported playlists

Codec type

File extension

M3U

M3U8

PLS

m3u

m3u8

pls

WPL

ASX

wpl

asx

Mobile device management

Cybernetic security

Your vehicle contains components that are used to

exchange information and data between the vehicle

and the connected mobile devices or the Internet.

These components have security mechanisms that

minimise the risk of unauthorised access to the vehi-

cle systems.

Connected / Previously connected devices

Available devices

A

B

Regular software updates help reduce the risk of un-

authorised access to vehicle systems and vehicle

functions. The following guidelines must therefore

be observed:

The device enables a connection via the Blue-

tooth®“hands-free proﬁle”

The device enables a connection via the Blue-

tooth® audio proﬁle

Remove the device from the list previously con-

nected devices

The device enables a SmartLink connection to

be made via Android Auto

Use only media carriers, Bluetooth® devices, and

mobile devices that contain no harmful data or

malware.

›

Regularly update the software provided by ŠKODA

AUTO.

›

The device enables a SmartLink connection to

be made via Apple CarPlay

The device enables a SmartLink connection to

be made via MirrorLink

We recommend having the system software and

components updated by a specialist company.

WARNING

Risk of an accident!

Malware in the vehicle can inﬂuence and deactivate

certain vehicle functions, or take over the controls of

these where applicable.

If the connection icon is green, the connection is

active.

If the vehicle reacts in an unusual way, immediately

reduce speed or stop the vehicle.

▶

Limitations of mobile devices and applications

Seek the help of a specialist garage.

▶

Availability of features

The availability of certain features depends on the

type of mobile device, as well as that of the applica-

tions installed.

WARNING

Malware in the vehicle may gain unauthorised access

to the information and data of the vehicle, and on oc-

casion, to connected mobile devices.

Compatibility of mobile devices

It is possible to check the ŠKODAweb pages to see if

Infotainment is compatible with the selected mobile

device being tested. This check is carried out by us-

ing the following reference or by reading the QR

code:

Overview

Using mobile device management, devices can be

connected, disconnected, and interchanged.

Display mobile device management

Tap on

mobile devices.

›

Infotainment Bolero › Telephone 99

http://go.skoda.eu/compatibility

Select the desired device from the list of available

devices.

›

Select the desired Bluetooth® proﬁle.

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

›

All information given is incidental and serves as in-

formation.

If two devices are connected to the Infotainment,

select the device to be replaced.

›

The ŠKODA AUTO company cannot guarantee full

functionality and compatibility, e.g. due to a software

update of the Infotainment and the mobile devices.

Connect Infotainment to a previously connected

mobile device

Mobile devices

.

›

Select the desired device from the list of known

devices.

Bluetooth® compatibility of mobile devices

Due to the large number of mobile devices, it is not

possible to guarantee total Bluetooth® compatibility

with Infotainment. Bluetooth® compatibility depends

on the Bluetooth® version as well as the implementa-

tion of Bluetooth® protocols by the manufacturer of

the mobile device.

Select the desired Bluetooth® proﬁle.

If two devices are connected to the Infotainment,

select the device to be replaced.

›

SmartLink connection

Infotainment provides the ability to connect Smar-

tLink to compatible mobile devices using the follow-

ing connection types:

Applications in mobile devices

Mobile devices can be used to install applications

that allow you to view additional information on the

Infotainment screen, or to operate the Infotainment

system.

Android Auto

Apple CarPlay

MirrorLink

Due to the variety of applications, as well as their on-

going development, the available applications may

not function on all mobile devices. ŠKODA AUTO as-

sumes no liability for their proper functioning.

Mobile devices can be connected to the Infotain-

ment via USB cable or Wi-Fi, as long as the mobile

device supports it.

Connect the mobile device to the Infotainment via

a USB cable or browse and connect to a wireless

network.

›

The scope of available applications and their func-

tionality is dependent on the type of Infotainment, as

well as the vehicle and country.

Tap the icon of the supported connection.

›

Information about ŠKODAapplications

Detailed information about ŠKODA applications can

be found on the website after reading the following

QR code or link:

Telephone

Overview

http://go.skoda.eu/mobile-apps

Display menu

Tap

.

›

If the menu phone is not displayed, check wheth-

er the mobile device is connected.

Manage contacts

Connection set-up

Tap on

.

›

Connect a mobile device to Infotainment

If two phones are connected, tap and select the

desired phone.

Find available Bluetooth® devices in the mobile de-

vice.

›

Select the Infotainment Bluetooth® unit.

›

The unit name can be determined by tapping

Manage mobile devices

device name:.

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

›

Connect Infotainment to a non-paired mobile de-

vice

Mobile devices

.

›

A

Contact search

100 Infotainment Bolero › Telephone

Telephone operation

Enter telephone number

B

C

D

E

Display favourite contacts

Display the list of all contacts

Name of the main telephone

Preset buttons for preferred contacts

Tap on

.

›

Enter the telephone number using the numeric

keypad that is displayed.

›

If no phone contacts are displayed, check the re-

quest to conﬁrm the import of contacts in the con-

nected mobile device.

To connect, tap on

.

›

The displayed numeric keypad can also be used

for searching for contacts.

If, for example, the digits 32 are entered, contacts

with the letter sequence DA, FA, EB etc. are dis-

played next to the numeric keypad.

Manage telephones

In the Phone menu, tap on

.

›

Tap on Select mobile phone

.

›

Establish a connection to the voice mailbox num-

ber

Tap on

.

›

.

If no voice mailbox number is entered, a menu for

entering this number will be displayed.

Telephone conversation

Depending on the context of the telephone conver-

sation, the following functions can be selected:

A Main telephone, additional telephone and known

devices

End connection / reject incoming call / end call

Accept incoming call

Return to the call on hold

B List of available telephones

C Setting for the Infotainment Bluetooth® function

Switch the ringer oﬀ / on

/

Hold a call

Switch the microphone oﬀ / on

Show details of the caller

Reject an incoming call using an SMS message

Answer a call from the second telephone during

a call on the ﬁrst telephone

The ongoing call on the ﬁrst telephone is termi-

nated by accepting the call.

The telephone enables connection via the Blue-

tooth® “hands-free proﬁle”

/

Delete telephone from the list of known devices

To display the recycle bin icon and the available

SmartLink connections, click the icon press and

drag to the left.

If the connection icon is green, the connection is

active.

To switch the call tone from the speakers to the

›

phone, tap on

To switch the call tone from the telephone to the

speakers, tap

.

Conditions for connecting a telephone with

Infotainment

.

Conference call

A conference call is a joint telephone conversation

with a minimum of three and a maximum of six par-

ticipants.

✓ The Bluetooth® function of the Infotainment and

the telephone needs to be switched on.

The Bluetooth® function of the Infotainment is

Make the next call during an ongoing conversation/

›

switched on in the menu item

Mobile devi-

conference.

ces

Bluetooth.

✓ Visibility of the Infotainment is switched on.

Or:

The visibility of the Infotainment is switched on in

Accept a new incoming call by tapping

.

›

the menu item

Mobile devices

Visibility.

To start a conference call, tap

.

✓ The telephone is within signal range of the Info-

tainment's Bluetooth® unit.

✓ The telephone is compatible with Infotainment.

During an ongoing conference call, the following

functions can be selected depending on the context:

Hold the conference call and leave temporarily

(the conference will continue in the background)

Return to the held conference call

Switch the microphone oﬀ / on

/

End conference call

Infotainment Bolero › Telephone 101

Show received e-mails

Show details of the conference call

In the Telephone

Select the desired e-mail.

menu tap on EMAIL

.

›

In the details of the conference call, depending on

the connected telephone, the following functions

can be selected:

›

The following functions can be selected in the dis-

played e-mail:

Show details of the conference call partici-

pants

End conversation with the conference call par-

ticipant

Conversation with a participant outside of the

conference call

Reply to all or just to the sender.

Reply with a new e-mail.

Forward e-mail.

E-mail management.

When the icon is displayed, the e-mail contains an

attachment.

Send a text message

In the Phone menu, tap on

.

›

To switch graphic notiﬁcations regarding the re-

ceipt of a new message on or oﬀ, tap in the Phone

›

Depending on the connected telephone, it may still

be necessary to select the SMS menu item.

menu New message notiﬁcations

.

Tap on

.

›

Write a text message and conﬁrm; a view of the

message is displayed.

Settings for Infotainment telephone functions

The message can be edited when the text area

within the view is tapped.

Search for or select the recipient of the message.

Telephone-Infotainment-Connection types

The way in which the telephone is connected de-

pends on the number of phones currently connected

to the Infotainment:

›

Multiple recipients can be added.

No telephone - The telephone is connected as a

main telephone.

One telephone - The telephone is connected as an

additional telephone.

Two telephones - Select the telephone to be re-

placed.

▶

Tap Send

.

Display received text messages

›

In the Phone menu, tap on

.

Depending on the connected telephone, it may still

be necessary to select the SMS menu item.

Tap on

.

›

To switch between the main telephone and the

additional telephone, tap on Phone in any menu.

Select the desired phone.

›

Messages that are received are displayed as indi-

vidual messages or as messages in a conversation,

depending on the following setting.

Connect the telephone to Infotainment

Find available Bluetooth® devices on the phone.

Select the Infotainment Bluetooth® unit.

To switch the display of messages as a conversa-

tion on or oﬀ, tap on

the Phone menu.

›

Show messages as a conversation in

The unit name can be determined by tapping

To switch graphic notiﬁcations regarding the re-

›

Manage mobile devices

device name:.

ceipt of a new message on or oﬀ, tap on

message notiﬁcations in the Phone menu.

New

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

›

Infotainment oﬀers the possibility to read the

Connect Infotainment to a non-paired mobile de-

vice

text message (context-dependent) by means of the

generated Infotainment voice if is tapped.

Mobile devices

.

›

For a quick response to the selected message,

tap on and select the desired answer.

Select the desired device from the list of available

devices.

Select the desired Bluetooth® proﬁle.

›

Send e-mails

›

In the Phone menu, tap on

Enter a subject for the e-mail.

Write an e-mail and conﬁrm that an e-mail is dis-

played.

EMAIL

.

›

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

If two devices are connected to the Infotainment,

select the device to be replaced.

›

Search for or select the recipient of the email.

›

Connect Infotainment to a previously paired tele-

phone

Multiple recipients can be added.

Tap Send

.

mobile devices

.

›

Or:

102 Infotainment Bolero › Wi-Fi

Infotainment can import up to 5000 telephone con-

tacts together with contact pictures. Each contact

can include max. 5 telephone numbers.

Select mobile phone

.

›

Select the desired device from the list of known

devices.

Depending on the type of telephone, import conﬁr-

mation may be required.

Select the desired Bluetooth® proﬁle.

If two devices are connected to the Infotainment,

select the device to be replaced.

›

Update telephone contacts

When connecting the next telephone with Infotain-

ment, an automatic update of the list is carried out.

Manage preset buttons for preferred contacts

To display the preferred contacts, tap on in the

Phone menu.

›

For manual update of the list in the phone

›

menu tap on Import contacts

.

To store the contact, tap on

Select or search for the desired contact.

If the contact contains multiple telephone num-

bers, choose the desired telephone number.

.

›

Switch message viewing as a conversation on/oﬀ

When this function is switched on, messages are dis-

played as a conversation.

In the Telephone

menu Show messages as conversation

.

›

To delete the contact tap on

menu.

in the Phone

›

Turn the graphic notice regarding receiving a new

message/email on or oﬀ

When the feature is on, the new message icon ap-

pears on the status bar and in the feature area for

the messages when a new message/e-mail is re-

ceived.

▶

To delete one preset, tap on and conﬁrm the

deletion.

▶

To delete all preset buttons, tap on and conﬁrm

the deletion.

The position of the preferred contacts can be

changed.

In the Telephone

menu New message notiﬁcations

.

›

Tap on

.

›

Hold down the desired contact until it is free.

Move the contact to another position.

Wi-Fi

Overview of available hotspots

Number for the voice mailbox

List of available hotspots

For setting the voice mailbox number in the

›

To display the list, tap on

Wi-Fi Wi-Fi:.

›

phone

menu Mailbox number:

.

Enter the voice mailbox number.

›

Ringtone

Some phones do not support the use of the phone

ringtone. Instead, the Infotainment ringtone is used.

For setting the Infotainment ringtone in the

›

phone

menu select the ringtone

.

Select the ringtone.

›

Switch HD voice quality for a call on/oﬀ

This function makes it possible to improve the quali-

ty of a telephone call.

A Search for available visible hotspots

B Connection to the hotspot via WPS

C Previously connected hotspots

D Available hotspots

In the Telephone

menu HD voice quality

.

›

Turn call rejection with a message on/oﬀ

If a call is rejected when this function is switched on,

an SMS message can be sent to the caller.

Currently connected hotspot

Delete information about the hotspot connection

Signal strength of the hotspot

In the Telephone

menu Reject call with SMS template

.

›

Sort contacts in the phone book

Hotspot signal is not available

In the Telephone

Select the desired sorting mode.

menu Sort by:

.

›

Import telephone contacts

Functionality

After ﬁrst connecting the main telephone with Info-

tainment, telephone contacts will start to be impor-

ted into the Infotainment memory.

The Wi-Fi can be used for the internet connection or

for the SmartLinkConnection.

Infotainment Bolero › Wi-Fi 103

Enter the password and conﬁrm.

The Infotainment hotspot can connect up to 8 mo-

bile devices. At the same time, the Infotainment can

be connected to another hotspot.

›

Quick connection of Infotainment to the mobile

device hotspot

On the mobile device, turn on the hotspot, its visi-

To display the list of connected mobile devices, tap

›

Wi-Fi Infotainment system as hotspot Connected devi-

bility, and the option for WPS connection.

ces.

Wi-Fi Wi-Fi: Tap WPS quick connection (WPS button)

.

›

Automatic WPS connection

Settings

Tap

Wi-Fi Quick connection to Infotainment system.

›

In the mobile device, switch on the option for con-

nection via WPS.

Wait for the connection to be established and, if

›

Connect a mobile device to the Infotainment hot-

spot

›

Turn on the Infotainment’s WLAN hotspot in the

menu item

›

necessary, conﬁrm the respective messages.

Wi-Fi Infotainment system as hotspot

Use as hotspot

.

Manual WPS connection

Turn on the Wi-Fi on the mobile device.

In the list of available Wi-Fi devices, look for Info-

tainment Wi-Fi.

In the mobile device, switch on the option for con-

nection via WPS PIN.

›

The mobile device display will show the WPS PIN

for connecting to the Infotainment.

The name of the Infotainment is taken from the

menu item

Wi-Fi Infotainment system as hotspot

Tap

Wi-Fi Quick connection to Infotainment system

›

Network name:

.

WPS PIN.

Select the Infotainment hotspot and enter the re-

quired password.

Enter the WPS PIN in the Infotainment and con-

ﬁrm.

Wait for the connection to be established and, if

necessary, conﬁrm the respective messages.

›

The password for connecting to the Infotainment

hotspot is taken from the menu item

Wi-

Fi Infotainment system as hotspot Password:

Conﬁrm the connection.

.

Automatic connection using the QR code

›

Wi-Fi Tap quick connection with infotainment system

In the mobile device, switch on the option for con-

nection via QR Code.

With the mobile device, read the QR code dis-

played on the Infotainment screen.

Wait for the connection to be established and, if

.

›

Connect Infotainment to the mobile device hot-

spot

Turn on the Infotainment’s Wi-Fi unit in the menu

›

item

Wi-Fi WLAN: Search for WLAN switch on

Select the desired hotspot in the list of available

hotspots.

Enter the password for connecting to mobile devi-

ces.

necessary, conﬁrm the respective messages.

Tips for a perfect connection

Keep only the hotspot to be connected switched

on and switch oﬀ the other hotspots.

Delete unused hotspots. This shortens the time re-

quired to establish a connection.

For some hotspots, the connection takes longer, so

wait for the connection to ﬁnish.

If the connection is interrupted, recheck the availa-

ble hotspots and repeat the connection.

▶

Infotainment stores passwords for previously

connected hotspots.

Security level of the Infotainment hotspot

The security level is set at WPA2 and cannot be

changed.

Data transmission with the connected device

To turn data transmission with the connected de-

›

vice on or oﬀ, tap

Wi-Fi Infotainment system as

hotspot Connected devices

.

Function restriction

Change the name of the Infotainment hotspot

Wi-Fi Infotainment system as a hotspot Network

›

The Infotainment system can only be connected to a

hotspot with WPA2 access protection.

name:

.

Enter the name and conﬁrm.

›

Restriction of the Wi-Fi connection

Change password for connection to Infotainment

hotspot

The password must be a minimum of 12 and a maxi-

mum of 63 characters.

In some countries, the Wi-Fi connection is restric-

ted for legal reasons. When crossing the border of

the country in question, the connection with a mo-

bile device connected via Wi-Fi can be ended or

restricted.

Wi-Fi Infotainment system as a hotspot Password:

.

›

104 Infotainment Bolero › SmartLink

Find out about country-speciﬁc legal restrictions.

If necessary, switch oﬀ the Wi-Fi manually.

Menu for a device used

SmartLink

Functionality

SmartLink oﬀers the ability to display and operate

certiﬁed applications from a connected mobile de-

vice in the Infotainment screen.

Certiﬁcation may be conditional upon the use of the

latest update to the particular SmartLink application.

A Used connection type

B Available connection type

Disconnect

Applications include, for example, apps for route

guidance, telephoning, listening to music, etc.

Mobile devices can be connected via a USB cable or

WiFi.

Android Auto

In the SmartLink menu, tap on

Select the connected device.

.

›

Supported connection types

SmartLink supports the following connection types:

Select the connection type

.

›

Android Auto

Apple CarPlay

MirrorLink

▶

Overview of the SmartLink connection

Display menu

Tap

.

›

Overview of running applications, phone calls, in-

coming text messages, and more.

Menu for device not connected

Turn on voice control (Google Voice)

Apple CarPlay

In the SmartLink menu, tap on

Select the connected device.

.

›

Select the connection type

.

›

A

List of supporting connection types

Menu for connected devices

A

List of available applications

Depending on the duration of operation:

B

Tap: Return to the menu Apple CarPlay

Hold: Turn on voice control (Siri)

▶

A

B

List of connected devices and available connec-

tion types

MirrorLink

In the SmartLink menu, tap on

Select the connected device.

.

›

List of available devices

Select the connection type

.

›

Infotainment Bolero › SmartLink 105

Conditions for MirrorLink

✓ The device to be connected must have MirrorLink

connection.

A list of devices and applications that support the

MirrorLink connection can be found on the web-

sites of Car Connectivity Consorcium®.

✓ The MirrorLink application needs to be installed

on the mobile device.

✓ Some applications require the data connection in

A Display of running applications

the connected mobile device to be turned on.

It is not possible to operate the application while

driving

Operation

Display of available devices

List of applications

Operation of the running MirrorLink application

Display of control surfaces at the bottom

Display of control surfaces at the top

Return to the menu MirrorLink

Display of the last running application in connec-

ted mobile devices

Settings

Restriction

Connection conditions

Restriction of the Wi-Fi connection

In some countries, the Wi-Fi connection is restric-

ted for legal reasons. When crossing the border of

the country in question, the connection with a mo-

bile device connected via Wi-Fi can be ended or

restricted.

General connection conditions

✓ The mobile device supports the type of Smar-

tLink connection Android Auto, Apple CarPlay or

MirrorLink.

✓ Mobile devices, as well as the type of SmartLink

connection, are supported in the respective mar-

ket.

Find out about country-speciﬁc legal restrictions.

If necessary, switch oﬀ the Wi-Fi manually.

✓ Some connected mobile devices require the mo-

Restriction of SmartLink applications while driving

For reasons of safety, the operation of some Smar-

tLink applications while driving is not possible or only

limited.

bile device to be “unlocked”.

Conditions for Android Auto

✓ The device to be connected must have Android

Auto connection.

Restriction of the navigation function

A list of devices, supported regions and applica-

tions that support the Android Auto connection

can be found on the Google, Inc. website.

If route guidance is currently being carried out

through Infotainment, this is ended when you start

route guidance in the Apple CarPlay application.

✓ The Android Auto application needs to be instal-

led on the mobile device.

✓ Some applications require the data connection in

If there is route guidance in the Apple CarPlay appli-

cation, it is ended by starting the destination guid-

ance using Infotainment.

the mobile device to be turned on.

✓ Connect the mobile device for the ﬁrst time

SmartLink settings

when the vehicle is stationary.

Conditions for Apple CarPlay

✓ The device to be connected must have Apple

CarPlay connection.

Apple CarPlay - Connection via USB

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

A list of devices, supported regions and applica-

tions that support the Apple CarPlay connection

can be found on the Apple Inc website.

›

Choose to connect via Apple CarPlay.

›

✓ Siri voice control is on.

✓ The data connection in the mobile device is

Apple CarPlay - Connection via Wi-Fi from Info-

tainment

switched on.

Turn on Bluetooth® and Bluetooth® visibility in the

Apple mobile device.

›

Tap on

mobile devices.

›

106 Infotainment Bolero › Navigation

In the displayed list, look for and select the desired

✓ The minimum Android version is 5.

✓ No other mobile device can be connected via

›

device with the symbol

.

SmartLink.

Follow the instructions on the Infotainment screen

and conﬁrm the Bluetooth® pairing.

If another device is connected to the Infotainment,

select the device to be replaced.

›

✓ Wi-Fi and Bluetooth® functionality is switched on

in the Infotainment system.

Find available Bluetooth® devices on the phone.

Select the Infotainment Bluetooth® unit.

If necessary, conﬁrm the PIN.

In the Infotainment screen, select the connection

›

Apple CarPlay - Connect via Wi-Fi from mobile de-

vices

To establish a connection, the following conditions

must be met:

›

type Android Auto.

✓ The minimum iOS version is 9.

✓ No other mobile device can be connected via

Android Auto - Disconnect

In the Android Auto

DA”.

menu, tap “Return to SKO-

›

SmartLink.

✓ Wi-Fi and Bluetooth® functionality is switched on

Tap on

.

›

in the Infotainment system.

MirrorLink - Connection via USB

In the mobile device, turn on the CarPlay function.

Press and hold the button on the multifunction

steering wheel.

›

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

The Infotainment screen displays a connection

message with the name of the Bluetooth® unit of

the Infotainment.

Choose to connect through MirrorLink.

›

MirrorLink - Disconnect

Find available Bluetooth® devices on the phone.

Select the Infotainment Bluetooth® unit.

If necessary, conﬁrm the PIN.

In the Infotainment screen, select the connection

›

In the MirrorLink menu, tap on

.

›

Tap on

.

›

Change to another device / connection type

Infotainment allows you to switch between currently

connected devices and the connection type.

type Apple CarPlay.

Apple CarPlay - Disconnect

In the SmartLink menu, tap on

Select the desired device or connection type.

.

In the Apple CarPlay menu, tap on the function

area “ŠKODA”.

›

Tap on

.

›

Android Auto - Connection via USB

Navigation

Turn on the Infotainment.

Turn on the mobile device.

Connect the mobile device to the front USB input

using a cable.

›

Navigation announcements

›

Infotainment route guidance takes place using

graphic driving recommendations and navigation an-

nouncements.

Choose to connect via Android Auto.

›

Android Auto - Connect via Wi-Fi from Infotain-

ment

The navigation announcements are generated by the

Infotainment system. Navigation announcement

clarity (e.g. road or city name) cannot always be

guaranteed.

mobile devices

.

›

Select the desired device from the list of available

devices.

Repeat the last navigation announcement

Select the Bluetooth® Freisprechproﬁl.

Conﬁrm the PIN; enter it if necessary and then

conﬁrm.

›

Tap on

.

›

Turn oﬀ navigation announcements

Tap on

.

›

If another device is connected to the Infotainment,

select the device to be replaced.

From the list of known devices, select the desired

›

Overview

device with the symbol.

Display menu

Android Auto - Connect via Wi-Fi from mobile de-

vices

Tap

.

›

To establish a connection, the following conditions

must be met:

Map overview

In the Navigation menu, tap on

.

›

Infotainment Bolero › Navigation 107

A Vehicle position

A Input line

B Route

B List of destinations that have recently been

searched for

C Route view

Show list of searched destinations

Enter destination via the address

D Press and drag to the left: Show route overview

E Following driving recommendation

F POI icon

Select the destination you are looking for

Enter the details for the destination search.

Select the desired destination.

›

Tap: Show destination details

G Tap: Change map orientation

Destination details are displayed with the option of

starting route guidance.

North-facing 2D map

2D map facing the direction of travel

3D map facing the direction of travel

▶

Enter destination via the address

In the Navigation

menu Find

.

›

H Road signs for the aﬀected route section

End route guidance

A menu for entering the destination via the ad-

dress is displayed.

Enter the required information.

Centre the map on the vehicle position

Display menu for setting the map display

›

Details of the searched destination are displayed

with the option of starting route guidance by tap-

Select the type of displayed map

ping on Start

.

In the Navigation menu, tap on

.

›

Enter the destination using GPS coordinates

In the Navigation

menu Find

Enter latitude and

›

longitude

.

A menu is displayed for entering the destination

using GPS coordinates.

Enter the desired GPS latitude and longitude infor-

mation.

›

Map

.

Details of the searched destination are displayed

with the option of starting route guidance by tap-

A

Display map in accordance with the following

setting

ping on Start

.

Auto - Map in day / night mode depending on

▶

Selecting destination by tapping the map point

Tap the desired item or the POI icon in the map.

the vehicle lighting currently switched on

›

Day - Map in day mode

Night - Map in night mode

▶

Destination details are displayed with the option of

starting route guidance.

B

When route guidance is running, one of the fol-

lowing map displays can be selected

Suggested destinations

In the Navigation

menu Tap on proposals

.

▶

›

- Map centred on the vehicle position

▶

- Map with the entire route/choice of alter-

native routes

Find destination

In the Navigation

menu Find

.

›

108 Infotainment Bolero › Navigation

Choose the menu in which the navigation is dis-

played.

Press the button on the multifunction steering

wheel.

›

The menu is displayed.

List of preferred destinations

In the Navigation

menu Favourites

.

›

Tapping the list entry with the destination displays

destination details with the option to start route

guidance.

A North-facing vehicle position

Destination with the home address

Destination with the work address

Destination details

The details window contains a map, available desti-

nation information and functional areas for selecting

functions.

The view can display up to 5 recommended destina-

tions in the following categories:

Destination with the home address

Destination with the work address

Favourites

Last destinations

Predictive destinations

▶

The destination details window is displayed in the

following cases:

After a destination has been searched for or selec-

ted in the menu.

▶

After a destination is tapped on in the route over-

view.

Destination alignment depends on the direction in

relation to the current vehicle position. The function-

al surface with the destination displays information

about the estimated travel time to the destination.

After an item or POI icon has been tapped on in the

map.

If the vehicle has active online services and there is a

traﬃc obstruction on the route to the destination,

the traﬃc obstruction icon will be displayed.

Delete the suggested destination

Touch the functional area for the suggested desti-

nation and swipe left.

›

Tap on

.

›

Turn on / oﬀ suggestions for predictive destina-

tions

Predictive destinations are automatically suggested

by Infotainment depending on the number of jour-

neys and the daily travel time to the given destina-

tion.

A Start route guidance

▶

- Save destination as a favourite

- Delete favourites

▶

B Press and drag to the left: Enlarge the window

with destination details

Depending on the destination context and desti-

nation type, the following functions are dis-

played:

If suggested predictive destinations is enabled, the

system can oﬀer these destinations in the proposed

destinations as well as while driving.

Demo - Set destination as a starting point for

route guidance in demo mode

Rename - Rename the saved destination

Call - Establish a connection to the POI tele-

▶

Basic function settings Tap Learn usage pattern

.

›

Deleting information for suggesting predictive

destinations

▶

Tap on

Basic function settings Delete usage pattern.

›

phone number

List of last destinations

Edit - Option for editing the home or work ad-

▶

dress

In the Navigation

menu Last destinations

.

›

Insert - Insert destination into the route

Stop route guidance - Stop route guidance

▶

Tapping the list entry with the destination displays

destination details with the option to start route

guidance.

Show route

The list of recent destinations can also be dis-

played in the Instrument cluster display.

Infotainment Bolero › Navigation 109

Route calculation

Hold the line with the desired destination until the

functional surface for the destination becomes

free.

Move the destination to the desired position and

release the functional surface.

›

The route is re-calculated.

Overview of traﬃc density

When ŠKODA online services are activated, traﬃc

density information can be displayed in the form of

the following colour scale in the route view ŠKODA:

A Current vehicle position

B Proposed fastest route

C Alternative routes

Low density

High density

Traﬃc density information is not available

D Destination position

Operation

E 15 s time countdown before automatic start of

the route guidance

Move map

▶

Tap: Interrupt time countdown

▶

F Start route guidance

Show information on the selected route

Set parameters for route calculation

Route overview

Enter destination by

tapping the map item

Switch 2D/3D map dis-

play

A

B

Information on current vehicle position

Final route destination

Tap: the following menu items can be selected.

Show on map

▶

Zoom into the map

Stop route guidance

C

D

Route stopover

Tap: the following menu items can be selected.

Show on map

▶

Add stopover destination

Destination provided by Infotainment on the

route

Zoom out of the map

Tap: the following menu items can be selected.

Show on map

▶

Add stopover destination

Change route destinations to each other

In the route overview, it is possible to exchange the

destination and the intermediate destinations with

each other and thus change their order.

110 Infotainment Bolero › Navigation

Rotate the map

Switching the speed limit warning on / oﬀ

▶

Tap on

Route guidance settings Road signs.

›

Set the note type and the value for exceeding the

permissible speed.

›

Towing a trailer

To calculate the correct route for trailer operation,

switch on trailer inclusion.

Tap on

Route guidance settings Trailer Include trailer.

›

Restriction

Set the maximum speed for trailer operation to cor-

rectly calculate the route time.

Infotainment may give incorrect driving recommen-

dations if the road conditions or the traﬃc do not

match the navigation data. This can lead to the route

guidance being carried out using a diﬀerent route or

proposing a change of direction in a one-way street.

Tap on

Route guidance settings Trailer Maximum speed for

›

trailer

.

Set the maximum speed for the trailer.

›

Setting navigation announcements

Information for updating the navigation data must be

requested from a ŠKODA partner.

Tap on

Navigation announcement settings.

›

Select and set the desired menu item.

›

Turn predictive destination suggestions on / oﬀ

Tap on

Settings

Basic function settings Learn usage pattern

.

›

Avoiding traﬃc obstructions

Delete information for suggesting frequently vis-

ited points of interest

If the function is switched on and the Infotainment

receives information about a traﬃc obstruction on

the route from online traﬃc information, the route is

recalculated.

Tap on

Conﬁrm the deletion.

Basic function settings Delete usage pattern.

›

Show preferred POI categories

Favourite POI categories are displayed on the map

and provided in the destination search.

Infotainment may suggest a detour to avoid traﬃc

obstructions, depending on the following settings:

Route guidance settings Tap on Avoid traﬃc incidents

Select the desired menu item.

.

›

Tap on

Set favourite categories.

Basic function settings Deﬁne preferred POI categories.

›

Switching the fuel warning on / oﬀ

Switching demo mode on / oﬀ

When the function is switched on and the fuel sup-

ply reaches the reserve area, a warning message ap-

pears with the option of going to the nearest petrol

station.

In demo mode, the route guidance from the starting

point of the demo mode to the selected destination

is simulated.

When the function is switched on, Infotainment is-

sues a query before the start of route guidance as to

whether the route guidance should be carried out in

the normal way or in demo mode.

Tap on

Route guidance settings Fuel warning.

›

Switching display of country-speciﬁc speed limits

on / oﬀ

When the function is switched on, the country-spe-

ciﬁc speed limits are displayed when crossing nation-

al borders.

Basic functions settings Demo mode

.

›

Deﬁning the starting point of the demo mode

Turn on the demo mode.

›

Tap on

Route guidance settings Country information at border

›

Tap on

Basic function settings Deﬁne demo mode starting point.

›

crossings

.

Select the desired destination to be used as the

starting point for the demo mode.

Switching the display of road signs on motorways

and expressways on / oﬀ

When the function is switched on, Infotainment dis-

plays traﬃc and information signs on motorways and

expressways.

Or:

Turn on the demo mode.

Select or locate the desired destination to be the

starting point of demo mode.

›

Route guidance settings Tap Signs on long-distance roads

.

›

Destination details are displayed.

Switch road sign display on/oﬀ

When this function is switched on, the Infotainment

displays road signs on the route.

Display the window with destination details in full

screen.

›

Tap on

Route guidance settings Road signs Show on map

.

The window is enlarged by pressing the button in

the window bar swiping left.

›

Infotainment Bolero for Your Skoda Octavia 4 Door Fourth Generation (2021-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals