Infotainment Bolero -> Telephone for Your Skoda Octavia 4 Door Fourth Generation (2021-2026)

Infotainment Bolero › Telephone 99  
http://go.skoda.eu/compatibility  
Select the desired device from the list of available  
devices.  
Select the desired Bluetooth® profile.  
Confirm the PIN; enter it if necessary and then  
confirm.  
All information given is incidental and serves as in-  
formation.  
If two devices are connected to the Infotainment,  
select the device to be replaced.  
The ŠKODA AUTO company cannot guarantee full  
functionality and compatibility, e.g. due to a software  
update of the Infotainment and the mobile devices.  
Connect Infotainment to a previously connected  
mobile device  
Mobile devices  
.
Select the desired device from the list of known  
devices.  
Bluetooth® compatibility of mobile devices  
Due to the large number of mobile devices, it is not  
possible to guarantee total Bluetooth® compatibility  
with Infotainment. Bluetooth® compatibility depends  
on the Bluetooth® version as well as the implementa-  
tion of Bluetooth® protocols by the manufacturer of  
the mobile device.  
Select the desired Bluetooth® profile.  
If two devices are connected to the Infotainment,  
select the device to be replaced.  
SmartLink connection  
Infotainment provides the ability to connect Smar-  
tLink to compatible mobile devices using the follow-  
ing connection types:  
Applications in mobile devices  
Mobile devices can be used to install applications  
that allow you to view additional information on the  
Infotainment screen, or to operate the Infotainment  
system.  
Android Auto  
Apple CarPlay  
MirrorLink  
Due to the variety of applications, as well as their on-  
going development, the available applications may  
not function on all mobile devices. ŠKODA AUTO as-  
sumes no liability for their proper functioning.  
Mobile devices can be connected to the Infotain-  
ment via USB cable or Wi-Fi, as long as the mobile  
device supports it.  
Connect the mobile device to the Infotainment via  
a USB cable or browse and connect to a wireless  
network.  
The scope of available applications and their func-  
tionality is dependent on the type of Infotainment, as  
well as the vehicle and country.  
Tap the icon of the supported connection.  
Information about ŠKODAapplications  
Detailed information about ŠKODA applications can  
be found on the website after reading the following  
QR code or link:  
Telephone  
Overview  
http://go.skoda.eu/mobile-apps  
Display menu  
Tap  
.
If the menu phone is not displayed, check wheth-  
er the mobile device is connected.  
Manage contacts  
Connection set-up  
Tap on  
.
Connect a mobile device to Infotainment  
If two phones are connected, tap and select the  
desired phone.  
Find available Bluetooth® devices in the mobile de-  
vice.  
Select the Infotainment Bluetooth® unit.  
The unit name can be determined by tapping  
Manage mobile devices  
device name:.  
Confirm the PIN; enter it if necessary and then  
confirm.  
Connect Infotainment to a non-paired mobile de-  
vice  
Mobile devices  
.
A
Contact search  
100 Infotainment Bolero › Telephone  
Telephone operation  
Enter telephone number  
B
C
D
E
Display favourite contacts  
Display the list of all contacts  
Name of the main telephone  
Preset buttons for preferred contacts  
Tap on  
.
Enter the telephone number using the numeric  
keypad that is displayed.  
If no phone contacts are displayed, check the re-  
quest to confirm the import of contacts in the con-  
nected mobile device.  
To connect, tap on  
.
The displayed numeric keypad can also be used  
for searching for contacts.  
If, for example, the digits 32 are entered, contacts  
with the letter sequence DA, FA, EB etc. are dis-  
played next to the numeric keypad.  
Manage telephones  
In the Phone menu, tap on  
.
Tap on Select mobile phone  
.
Establish a connection to the voice mailbox num-  
ber  
Tap on  
Tap on  
.
.
If no voice mailbox number is entered, a menu for  
entering this number will be displayed.  
Telephone conversation  
Depending on the context of the telephone conver-  
sation, the following functions can be selected:  
A Main telephone, additional telephone and known  
devices  
End connection / reject incoming call / end call  
Accept incoming call  
Return to the call on hold  
B List of available telephones  
C Setting for the Infotainment Bluetooth® function  
Switch the ringer off / on  
/
Hold a call  
Switch the microphone off / on  
Show details of the caller  
Reject an incoming call using an SMS message  
Answer a call from the second telephone during  
a call on the first telephone  
The ongoing call on the first telephone is termi-  
nated by accepting the call.  
The telephone enables connection via the Blue-  
tooth® “hands-free profile”  
/
Delete telephone from the list of known devices  
To display the recycle bin icon and the available  
SmartLink connections, click the icon press and  
drag to the left.  
If the connection icon is green, the connection is  
active.  
To switch the call tone from the speakers to the  
phone, tap on  
To switch the call tone from the telephone to the  
speakers, tap  
.
Conditions for connecting a telephone with  
Infotainment  
.
Conference call  
A conference call is a joint telephone conversation  
with a minimum of three and a maximum of six par-  
ticipants.  
The Bluetooth® function of the Infotainment and  
the telephone needs to be switched on.  
The Bluetooth® function of the Infotainment is  
Make the next call during an ongoing conversation/  
switched on in the menu item  
Mobile devi-  
conference.  
ces  
Bluetooth.  
Visibility of the Infotainment is switched on.  
Or:  
The visibility of the Infotainment is switched on in  
Accept a new incoming call by tapping  
.
the menu item  
Mobile devices  
Visibility.  
To start a conference call, tap  
.
The telephone is within signal range of the Info-  
tainment's Bluetooth® unit.  
The telephone is compatible with Infotainment.  
During an ongoing conference call, the following  
functions can be selected depending on the context:  
Hold the conference call and leave temporarily  
(the conference will continue in the background)  
Return to the held conference call  
Switch the microphone off / on  
/
End conference call  
Infotainment Bolero › Telephone 101  
Show received e-mails  
Show details of the conference call  
In the Telephone  
Select the desired e-mail.  
menu tap on EMAIL  
.
In the details of the conference call, depending on  
the connected telephone, the following functions  
can be selected:  
The following functions can be selected in the dis-  
played e-mail:  
Show details of the conference call partici-  
pants  
End conversation with the conference call par-  
ticipant  
Conversation with a participant outside of the  
conference call  
Reply to all or just to the sender.  
Reply with a new e-mail.  
Forward e-mail.  
E-mail management.  
When the icon is displayed, the e-mail contains an  
attachment.  
Send a text message  
In the Phone menu, tap on  
.
To switch graphic notifications regarding the re-  
ceipt of a new message on or off, tap in the Phone  
Depending on the connected telephone, it may still  
be necessary to select the SMS menu item.  
menu New message notifications  
.
Tap on  
.
Write a text message and confirm; a view of the  
message is displayed.  
Settings for Infotainment telephone functions  
The message can be edited when the text area  
within the view is tapped.  
Search for or select the recipient of the message.  
Telephone-Infotainment-Connection types  
The way in which the telephone is connected de-  
pends on the number of phones currently connected  
to the Infotainment:  
Multiple recipients can be added.  
No telephone - The telephone is connected as a  
main telephone.  
One telephone - The telephone is connected as an  
additional telephone.  
Two telephones - Select the telephone to be re-  
placed.  
Tap Send  
.
Display received text messages  
In the Phone menu, tap on  
.
Depending on the connected telephone, it may still  
be necessary to select the SMS menu item.  
Tap on  
.
To switch between the main telephone and the  
additional telephone, tap on Phone in any menu.  
Select the desired phone.  
Messages that are received are displayed as indi-  
vidual messages or as messages in a conversation,  
depending on the following setting.  
Connect the telephone to Infotainment  
Find available Bluetooth® devices on the phone.  
Select the Infotainment Bluetooth® unit.  
To switch the display of messages as a conversa-  
tion on or off, tap on  
the Phone menu.  
Show messages as a conversation in  
The unit name can be determined by tapping  
To switch graphic notifications regarding the re-  
Manage mobile devices  
device name:.  
ceipt of a new message on or off, tap on  
message notifications in the Phone menu.  
New  
Confirm the PIN; enter it if necessary and then  
confirm.  
Infotainment offers the possibility to read the  
Connect Infotainment to a non-paired mobile de-  
vice  
text message (context-dependent) by means of the  
generated Infotainment voice if is tapped.  
Mobile devices  
.
For a quick response to the selected message,  
tap on and select the desired answer.  
Select the desired device from the list of available  
devices.  
Select the desired Bluetooth® profile.  
Send e-mails  
In the Phone menu, tap on  
Enter a subject for the e-mail.  
Write an e-mail and confirm that an e-mail is dis-  
played.  
EMAIL  
.
Confirm the PIN; enter it if necessary and then  
confirm.  
If two devices are connected to the Infotainment,  
select the device to be replaced.  
Search for or select the recipient of the email.  
Connect Infotainment to a previously paired tele-  
phone  
Multiple recipients can be added.  
Tap Send  
.
mobile devices  
.
Or: