Keys, locks and alarm system › Keyless locking (KESSY) 25
fuel filler flap are unlocked by touching the door han-
Locking the door without the lock cylinder
dle.
When unlocked again, the other doors and the boot
lid are unlocked.
Doors on one side of the vehicle
Using the button on the key, the doors on the driv-
er’s side and the fuel filler flap are unlocked.
In vehicles equipped with a keyless locking system,
the doors on the passenger’s side near to which the
key is located and the fuel filler flap are unlocked by
touching the door handle.
Open the door.
For vehicles with a panel over the opening, remove
the panel.
›
›
When unlocked again, the other doors and the boot
lid are unlocked.
Insert the key or a flat-head screwdriver into the
slot.
›
Troubleshooting
Turn the key or flat-head screwdriver towards the
outside of the vehicle (spring-loaded position).
›
Central locking fault
The warning light in the driver's door first flashes
▶
After closing, the door is locked.
for 2 secs in quick succession.
Then it lights up continuously.
After 30 secs, it flashes slowly.
▶
▶
Keyless locking (KESSY)
Usage
Seek the help of a specialist garage.
›
The keyless locking system, KESSY, enables unlock-
ing and locking of the vehicle without actively using
the remote control key.
Mechanically unlocking and locking the door
Unlocking and locking the door with the lock cylin-
der
Remove the cover
Operation
Pull the handle on the
front left door and hold
it in place.
›
Keep the key with you when unlocking and locking.
The sensors on the handle are intended to be operat-
ed with bare hands, e.g. wearing gloves may affect
the function of the sensors.
Insert the key bit into
the recess on the un-
derside of the cover.
›
The recess on the door handle is also present on
vehicles without the keyless locking system.
Lift the cover in the di-
rection of the arrow.
›
Release
Release the door han-
dle.
›
Grab the door handle.
Open the door.
›
›
Locking and unlocking
Insert the removed key
›
bit with the pendant
facing downwards into
the lock cylinder, then
unlock or lock it.
Install cover
Pull on the door handle
and hold it.
›
Replace the cover.
›
Release the door handle.
›