Storage space and interior equipment › Double-sided floor covering 203
Attach at the back
Hold the raised cover
›
in place and press the
underside of the cover
on both sides.
Remove the cover.
›
Inserting
Remove the roll-up cover or fold up the rear seat
backrests.
›
› Insert the mount A
opposite the holder B
on both sides of the
boot.
› Insert the crossbar into the mount A on one side
and push it forwards.
Fix the bar in the same way on the other side.
Press on the cover
from above until it en-
gages.
Hook in the retaining
straps.
›
›
› Snap the carabiners B into the lashing eyes.
› Pull the straps firmly at the free ends C .
›
Fasten in the front
The procedure is analogous to the process behind.
Stow the cover behind the rear seats of a vehicle
without natural gas drive
The lashing eyes for the carabiner are located under
the central body pillars.
Remove the cover and
place it on the floor
›
Loosening
Loosening takes place in the reverse order to fixing.
cover in the boot.
Lift up the cover in the
front area.
›
Double-sided floor covering
Push the cover up be-
tween the rear seats
and the bracket A .
›
Overview
Depending on the equipment, the vehicle may be
equipped with a double-sided floor covering in the
luggage compartment. One side is made of fabric,
the other side is washable.
Store the cover behind the rear seats of a natural
gas vehicle
Push the cover up be-
tween the rear seats
›
Rigid boot cover
and the bracket A .
Removing and inserting
The maximum load of the other fastening nets is
1 kg.
Removing
Unhook the straps.
›
WARNING
The boot cover stowed behind the rear seats re-
stricts the driver's rear view.
English 
