Get Driver information system Guide for Skoda Superb SUV Third Generation (2016-2023)

62 Driver information system › Analogue instrument cluster

Total distance travelled

E

F

Driver information system

Trip - Distance travelled after resetting the

memory

Analogue instrument cluster

Overview

Overview of the main menu items

Driving data » page 64.

Assistants - Activate / deactivate assistance sys-

tems.

▶

Overview of the instrument cluster display

▶

Navigation - e.g. show driving recommendations,

compass, destination list.

▶

Audio - Using radio and media.

Telephone - call list, accept or reject incoming call.

Vehicle - Vehicle condition » page 66.

▶

Operation

Operation via the multifunction steering wheel

A

B

C

D

E

Tachometer with indicator lights

Display

Turn - Switch be-

tween menu items /

set values

A

Speedometer with indicator lights

Bar with indicator lights

Multifunction button:

Press - Conﬁrm

menu item

Set the time.

Reset ( trip ) odometer.

Display the distance travelled and the days un-

til the next service date.

▶

Press - Return one

level higher in the

menu

Hold - Display the

main menu

F

Coolant temperature display

Fuel level indicator

Press - Show previous menu (if one was selec-

G

ted) / Show phone menu

NOTICE

Risk of serious damage to the engine and the ex-

haust system!

Settings

Never run the fuel tank completely empty!

▶

Set language

The language is set in the following menu in the Info-

tainment system.

In poor visibility and with dipped headlights oﬀ,

the brightness of the instrument cluster lighting is

reduced to remind the driver to turn on the light.

Setting the time

Display overview

Depending on the equipment, the following informa-

tion is shown on the display.

Press and hold the button in the instru-

ment cluster until the menu item Time is

›

displayed.

Time

A

B

Release the button, the display shows the hour set-

›

Directional display

Gear engaged / gear

recommendation

Selector lever posi-

tions of the auto-

matic transmission

Traﬃc signs detec-

ted

ting.

Press the button repeatedly and set the hours.

Wait 4 seconds, the display shows the minute set-

›

ting.

Press the button repeatedly and set the minutes.

Wait 4 seconds, the display shows the initial set-

›

ting.

The time is set in the Infotainment system in the fol-

lowing menu.

Menu, indicator

C

lights and information

Outside temperature

D

or - low outside temperature

Driver information system › Digital instrument cluster 63

Reset the odometer

Brieﬂy press the button in the instrument

Operation

›

Rotate - Switch be-

tween menu items /

set values / change

map scale manually

A

cluster.

Set the brightness of the instrument cluster light-

ing

The brightness of the instrument lighting is automat-

ically adjusted depending on the given lighting condi-

tions.

Press - Conﬁrm

menu item

Turn and press -

Switch on automatic

change of map scale

Press - Return one

When low beam is switched on, the brightness of

the instruments lighting can be adjusted in the fol-

lowing menu in the Infotainment system.

level higher in the menu

Hold - Display the main menu

Depending on the equipment:

Or:

Press - Change the version of the display

▶

Hold - Display the pre-set options menu with

▶

additional information

Digital instrument cluster

Overview

Settings

Overview of the instrument cluster display

Set language

The language is set in the following menu in the Info-

tainment system.

Reset the odometer in the instrument cluster

Select Trip in the menu in the instrument cluster dis-

play

›

Rotate - Select entry

A

Press - Conﬁrm en-

try

A

B

C

D

E

Bar with indicator lights

Coolant temperature display

Fuel level indicator

Display

Hold - Reset counter

Additional information

Central display area

F

Setting the time

The time is set in the following menu in the Infotain-

ment system.

NOTICE

Risk of serious damage to the engine and the ex-

haust system!

Never run the fuel tank completely empty!

▶

Set the brightness of the instrument cluster light-

ing

The brightness is adjusted automatically according

Overview of the main menu items

Driving data » page 64.

▶

to the given lighting conditions.

Assistants - Activate / deactivate assistance sys-

tems.

Navigation - e.g. show driving recommendations,

compass, destination list.

▶

The brightness is adjusted with the dipped beam

switched on in the infotainment in the following

menu.

▶

Audio - Using radio and media.

Telephone - call list, accept or reject incoming call.

Vehicle - Vehicle condition » page 66.

▶

Or:

64 Driver information system › Driving data

Set the variant of the display

Press the button on the multifunction steering

wheel to change the variant of the display presen-

tation.

›

Select the variants shown

Press and hold the button on the multifunction

steering wheel.

›

Select and conﬁrm the menu item for the display

variants.

›

Select and conﬁrm one of the following variants of

the display.

Select the desired additional information in areas

A.

›

Hold the desired function area for the pre-selec-

tion option in the area B to save the selection (the

scope of the pre-set options depends on the type

of Infotainment).

Driving data

Overview

The driving data display works with the ignition

switched on.

In the instrument cluster display

A

B

C

D

E

Classic display

Depending on the equipment, the display of the in-

strument cluster shows information such as speed,

fuel consumption, range, etc.

Extended display

Modern display

In Infotainment

Basic display

Sporty display (depending on equipment)

Select to display additional information

Press and hold the button on the multifunction

steering wheel.

›

Select and conﬁrm one of the following pre-selec-

tion options (the scope of the pre-selection op-

tions depends on the infotainment type).

›

▶

Auto - Information depending on the selected

driving mode

Classic - Information about the gear selected

and the current speed.

Adjustable pre-selection options.

A

B

C

D

E

Travelled distance

Driving time

▶

Average speed

Setting the pre-selection option for the display of

additional information

The pre-selection option for displaying additional in-

formation is set in the Infotainment system in the

following menu.

Average fuel consumption

Driving economy evaluation - DriveGreen func-

tion (depending on the Infotainment

type) » page 167

F

Graphic fuel gauge - If the expected range is less

than 300 km, the vehicle slowly approaches the

symbol

Menu item for the virtual cockpit

Or:

G

Range

Menu item for the virtual cockpit

Storage

The system saves the driving data in the following

memories.

Driver information system › Speed limit warning 65

Since start

Menu item for driving data

Or:

Driving data from the time of switching on the ig-

nition until the ignition is switched oﬀ again is stor-

ed in the memory. If the journey is interrupted for

more than 2 hours, the memory will be reset.

▶

Menu item for driving data

Reset memory in infotainment

The memory is reset in the following menu in the in-

fotainment system.

Long-term

The driving data of all trips up to a total of 99

hours and 59 minutes driving time or 9999 km

driving distance are stored in the memory. If one of

the listed values is exceeded, the memory is reset.

▶

Or:

Since refuel

Driving data from the last fuel tank are stored in

the memory. The memory is reset the next time

the tank is ﬁlled.

▶

Settings

Select the driving data to be displayed

The driving data to be displayed is selected in the

following Infotainment menu.

Operation

Display driving data in the display of the instru-

ment cluster via the multi-functional steering

wheel

Or:

Select the menu item for the driving data in the

main menu in the instrument cluster display.

›

Set units

The units are set in the following Infotainment menu.

Turn - Select entry /

A

set values

Press - Conﬁrm en-

try

Or:

Speed limit warning

Usage

Display drive data in the Infotainment

The driving data is displayed in the following menu in

the infotainment system.

The system oﬀers the possibility to set a speed limit

beyond which an acoustic warning signal will sound

and the following warning message appears in the

display of the instrument cluster.

Menu item for driving data

Or:

Settings

Menu item for driving data

Select memory for driving data in the display of

the instrument cluster via the multifunction steer-

ing wheel and reset it

Setting the speed limit

Select and conﬁrm the menu item Warning at or

›

(depending on display type).

When the vehicle is stationary, set the desired

speed limit and conﬁrm.

While driving, drive at the desired speed and con-

ﬁrm it as the speed limit.

›

To select the memory

›

for the displayed driv-

ing data, press the set-

ting wheel A repeat-

edly.

To reset the memory,

hold the setting wheel

›

Resetting the speed limit

Select and conﬁrm the menu item Warning at or

(depending on display type).

To reset the speed limit, conﬁrm the stored value.

›

A.

›

If the journey is interrupted for more than 2 hours,

the set limit is deactivated, but the set value remains

stored.

Select memory in infotainment

To select the memory, use the functional areas

in the following menu in the infotainment system.

66 Driver information system › Vehicle status

Vehicle status

Display

The vehicle status is displayed in the following menu

in the infotainment system.

Menu item for vehicle status

Or:

Menu item for vehicle status

A

B

Overall time

Start the measurement

Stop the measurement

Current lap time

C

D

Evaluate/reset split times

End the measurement (the current lap time is

not stored)

E

F

Start measurement of the next lap time

The split time is brieﬂy shown in the display A

A

B

Vehicle areas shown in colour indicate associ-

ated warning messages

End the measurement (the current lap time is

stored)

No notiﬁcation

Warning messages regarding the vehicle con-

dition and their quantity

Information Sport

Settings

C

Display of information about the status of

the START-STOP system

▶

Activation / deactivation of the infor-

mation regarding the messages of the START-

STOP system in another screen display

The Sport information display is shown in the menu

in the Infotainment.

Sport

Or:

Functionality

Sport

In the event of a system fault, messages relating to

the relevant fault are shown on the instrument clus-

ter display when the ignition is switched on.

A swipe of the ﬁnger vertically across the screen al-

lows three of the following displays to be shown.

Charge pressure.

Acceleration.

Output.

Coolant temperature.

Oil temperature.

▶

Malfunctions can also be displayed in infotainment.

As long as the malfunctions have not been rem-

edied, the warning messages are displayed again and

again. After the ﬁrst display of the message, only the

indicator lights remain on (Hazard) or (Warning)

is displayed.

Personalization

Usage

Stopwatch in the Infotainment

Overview

The personalization feature allows each vehicle key

to be assigned a user account.

The stopwatch display is shown in the menu in the

Infotainment.

In the user account, settings can be assigned regard-

ing e.g. light function, driver's seat and exterior mir-

ror position, assistance systems, radio, navigation,

etc.

Sport

Or:

Sport

Infotainment Swing › Infotainment overview 67

Functionality

Infotainment Swing

After opening the driver's door, the personalized

functions are set according to the user account as-

signed to the key with which the vehicle was un-

locked.

Infotainment overview

There are three user accounts and a guest account.

A change in the set personalized functions is auto-

matically saved in the active user account.

Change user account

WARNING

Risk of accident!

Carry out the account change while the vehicle is

stationary.

▶

A

B

Touchscreen

SD card slot

In the instrument cluster display

Switching to a diﬀerent user account is

›

Control dial left

in the instrument cluster display within

10 seconds after turning on the igni-

tion.

Press: Switch Infotainment on/oﬀ

Turn: Set volume

▶

Control dial right

In Infotainment

Press: Conﬁrm menu item

▶

The system settings are made in the Infotainment

›

Turn: select menu item/set value

▶

in the following menu.

Radio menu

Vehicle status

Media menu

Or:

Overview of Infotainment menus

Phone menu

Vehicle status

The account changes e.g. when changing drivers

while traveling. This prevents unwanted resetting of

the personalized functions in the active user account.

SmartLink menu

Press: Display menu

▶

Hold: Switch voice control of the SmartLink

application on / oﬀ

▶

Settings

Information about vehicle settings

This function is set in the following menu in the Info-

tainment system.

System

Or:

Limitation

For safety reasons, operation of some Infotainment

functions while driving is not possible or is restricted.

Key assignment - Options for assigning the recog-

nized key to the active user account

▶

The Infotainment system indicates this by means of

a message in the screen.

▶

Manual - the key must be assigned to the active

account manually

Automatic - detected key automatically assigned

▶

Basic settings

to a diﬀerent account of the active account

Assign key to current user account - Manual as-

signment of the key to the active account

▶

Set basic functions

The following Infotainment functions are set in the

menu

.

To maintain the assignment of the selected user

account to the selected key, we recommend that

you select the manual key assignment.

Time and date.

Language.

Units.

▶

Driver information system for Your Skoda Superb SUV Third Generation (2016-2023)

Related Topics

Popular Owner Manuals

Latest Owner Manuals