2016-2023 Skoda Superb SUV Driver information system -> Driving data User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driver information system -> Driving data for Your Skoda Superb SUV Third Generation (2016-2023)

64 Driver information system › Driving data  
Set the variant of the display  
Press the button on the multifunction steering  
wheel to change the variant of the display presen-  
tation.  
Select the variants shown  
Press and hold the button on the multifunction  
steering wheel.  
Select and confirm the menu item for the display  
variants.  
Select and confirm one of the following variants of  
the display.  
Select the desired additional information in areas  
A.  
Hold the desired function area for the pre-selec-  
tion option in the area B to save the selection (the  
scope of the pre-set options depends on the type  
of Infotainment).  
Driving data  
Overview  
The driving data display works with the ignition  
switched on.  
In the instrument cluster display  
A
B
C
D
E
Classic display  
Depending on the equipment, the display of the in-  
strument cluster shows information such as speed,  
fuel consumption, range, etc.  
Extended display  
Modern display  
In Infotainment  
Basic display  
Sporty display (depending on equipment)  
Select to display additional information  
Press and hold the button on the multifunction  
steering wheel.  
Select and confirm one of the following pre-selec-  
tion options (the scope of the pre-selection op-  
tions depends on the infotainment type).  
Auto - Information depending on the selected  
driving mode  
Classic - Information about the gear selected  
and the current speed.  
Adjustable pre-selection options.  
A
B
C
D
E
Travelled distance  
Driving time  
Average speed  
Setting the pre-selection option for the display of  
additional information  
The pre-selection option for displaying additional in-  
formation is set in the Infotainment system in the  
following menu.  
Average fuel consumption  
Driving economy evaluation - DriveGreen func-  
tion (depending on the Infotainment  
type) » page 167  
F
Graphic fuel gauge - If the expected range is less  
than 300 km, the vehicle slowly approaches the  
symbol  
Menu item for the virtual cockpit  
Or:  
G
Range  
Menu item for the virtual cockpit  
Storage  
The system saves the driving data in the following  
memories.  
Driver information system › Speed limit warning 65  
Since start  
Menu item for driving data  
Or:  
Driving data from the time of switching on the ig-  
nition until the ignition is switched off again is stor-  
ed in the memory. If the journey is interrupted for  
more than 2 hours, the memory will be reset.  
Menu item for driving data  
Reset memory in infotainment  
The memory is reset in the following menu in the in-  
fotainment system.  
Long-term  
The driving data of all trips up to a total of 99  
hours and 59 minutes driving time or 9999 km  
driving distance are stored in the memory. If one of  
the listed values is exceeded, the memory is reset.  
Or:  
Since refuel  
Driving data from the last fuel tank are stored in  
the memory. The memory is reset the next time  
the tank is filled.  
Settings  
Select the driving data to be displayed  
The driving data to be displayed is selected in the  
following Infotainment menu.  
Operation  
Display driving data in the display of the instru-  
ment cluster via the multi-functional steering  
wheel  
Or:  
Select the menu item for the driving data in the  
main menu in the instrument cluster display.  
Set units  
The units are set in the following Infotainment menu.  
Turn - Select entry /  
A
set values  
Press - Confirm en-  
try  
Or:  
Speed limit warning  
Usage  
Display drive data in the Infotainment  
The driving data is displayed in the following menu in  
the infotainment system.  
The system offers the possibility to set a speed limit  
beyond which an acoustic warning signal will sound  
and the following warning message appears in the  
display of the instrument cluster.  
Menu item for driving data  
Or:  
Settings  
Menu item for driving data  
Select memory for driving data in the display of  
the instrument cluster via the multifunction steer-  
ing wheel and reset it  
Setting the speed limit  
Select and confirm the menu item Warning at or  
(depending on display type).  
When the vehicle is stationary, set the desired  
speed limit and confirm.  
While driving, drive at the desired speed and con-  
firm it as the speed limit.  
To select the memory  
for the displayed driv-  
ing data, press the set-  
ting wheel A repeat-  
edly.  
To reset the memory,  
hold the setting wheel  
Resetting the speed limit  
Select and confirm the menu item Warning at or  
(depending on display type).  
To reset the speed limit, confirm the stored value.  
A.  
If the journey is interrupted for more than 2 hours,  
the set limit is deactivated, but the set value remains  
stored.  
Select memory in infotainment  
To select the memory, use the functional areas  
in the following menu in the infotainment system.  

Related Topics

Popular Owner Manuals