2016-2023 Skoda Superb SUV Lighting, windscreen wipers and washers -> Replace light bulbs User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Lighting, windscreen wipers and washers -> Replace light bulbs for Your Skoda Superb SUV Third Generation (2016-2023)

Lighting, windscreen wipers and washers › Dynamic Light Assist headlight assist system 51  
✓
The light switch is in the position  
.
service  
turn on  
✓ The driving speed is higher than 30 km/h (for  
some countries, higher than 60 km/h).  
Push the lever in the  
direction of the arrow.  
›
✓ The low beam is switched on.  
Lights up in the instru-  
service  
turn on  
ment cluster  
from  
the isolation box.  
Push the lever in the  
direction of the arrow.  
›
Turn off  
Manually switch the high beam on or off.  
Lights up in the instru-  
›
ment cluster  
from  
the isolation box.  
Function restriction  
The system may dazzle other road users if their  
headlights/lights are not detected for the following  
reasons, for example.  
Turn off  
Manually switch the high beam on or off.  
›
The headlights/lights of oncoming vehicles are  
covered by crash barriers, for example.  
▶
Settings  
The headlamps/lights of the oncoming or preced-  
ing vehicle are dirty or not functioning. The system  
can also recognize a vehicle as a single-lane means  
of transport.  
▶
Activation / deactivation  
The function is activated or deactivated in the fol-  
lowing menu in the Infotainment system.  
Or:  
Settings  
Activation / deactivation  
The Dynamic Light Assist is activated or deactivated  
in Infotainment in the following menu.  
Dynamic Light Assist headlight assist  
system  
Or:  
Functionality  
The headlight assist system automatically switches  
the high beam on and off.  
Replace light bulbs  
When the high beam is switched on, it adjusts the  
light cone so that the drivers of oncoming and pre-  
ceding vehicles are not dazzled.  
What you should be mindful of  
DIY replacement of the following bulbs is possible.  
Have the remaining light sources replaced by a spe-  
cialist garage.  
WARNING  
Risk of accident!  
If necessary, manually switch the high beam on or  
▶
off.  
The new bulb must conform to the specification of  
the original light bulb. The name of the bulb is  
marked on the bulb socket.  
Functional conditions  
NOTICE  
✓ The system is activated.  
Danger of headlight damage due to the ingress of  
water and dirt!  
✓
The light switch is in the position  
.
Always fit the protective cap on the headlight cor-  
rectly after changing a bulb.  
▶
✓ The driving speed is higher than 30 km/h (for  
some countries, higher than 60 km/h).  
✓ The low beam is switched on.  
Conditions for changing a bulb  
✓ Ignition switched off.  
52 Lighting, windscreen wipers and washers › Replace light bulbs  
✓ Light switched off.  
Rear turn signal and reversing lights  
Loosen and remove the lamp  
Front turn signal  
Remove the cover with  
the bracket from the  
tool kit.  
›
›
›
Remove the protective  
cap from the headlight.  
›
›
›
Unscrew the screws  
A and remove the  
lamp.  
Remove the base with  
the bulb.  
Press the lock mecha-  
nisms on the connec-  
tor and remove the  
connector.  
Change the bulb in the  
socket.  
Replacing the light bulb  
Turn the corresponding  
socket with the bulb  
and remove it.  
›
Push the base with the  
light bulb into the lamp  
so that the fixing lugs  
A fit into the recesses  
on the headlight.  
›
›
Reinstall the protective  
cap on the headlight.  
Turn the defective bulb  
in the socket and re-  
move it.  
Insert a new light bulb  
into the socket and se-  
cure the light bulb by  
turning it in the direc-  
›
›
tion of  
.
Push the base with the  
new light bulb into the  
luminaire so that the  
›
Lighting, windscreen wipers and washers › Interior lighting 53  
guide lugs on the base and the associated openings  
in the luminaire are flush.  
Turn the socket clockwise to secure.  
The vehicle is locked.  
The ignition is switched on.  
About 30 seconds after all the doors have been  
closed.  
▶
▶
▶
›
Insert and fix the lamp  
Insert the connector into the light until it clicks into  
place.  
›
If a door remains open and the ignition is switch-  
ed off, the lights will turn off automatically after 10  
minutes.  
Automatic switching on/off of the footwell light-  
ing  
The lighting only works when the dipped or parking  
lights are on.  
The lighting is also switched on automatically after  
opening the door (e.g. when getting in or out).  
Switch on the lighting of the makeup mirrors in the  
sun visors on the windscreen  
Slide on the cover of the makeup mirror.  
›
› The lamp with the openings A on the bolts B  
stuck in the body.  
NOTICE  
Settings  
Risk of damage to the electrical system due to water  
The brightness level of the footwell lighting when  
the dipped or parking lights are switched on is set in  
the infotainment in the following menu.  
ingress!  
Make sure that the seal is used correctly when in-  
▶
stalling the lamp C .  
NOTICE  
Or:  
Risk of damage to the electrical system!  
Make sure that the lines between the lamp and the  
body are not pinched when the lamp is inserted.  
▶
Screw on the lamp.  
Fit the cover of the light, ensuring it clicks into  
place.  
›
›
Interior ambient light  
Usage  
The ambient lighting ensures a comfortable atmos-  
phere in the vehicle interior.  
Interior lighting  
service  
The lighting only works when the dipped or parking  
lights are on.  
Operation of the lighting  
The lighting is also switched on automatically after  
opening the door.  
Lighting in front and rear  
Back lighting  
Reading lights  
Settings  
The background lighting brightness settings are set  
in the Infotainment system, in the following menu.  
Automatic switching on and off  
When the front light is set to , the rear light  
is automatically switched on or off.  
Or:  
Automatic switch on  
The light switches on when one of the following  
events occurs.  
The vehicle is unlocked.  
One of the doors is opened.  
The ignition is switched off.  
▶
▶
▶
Windscreen wipers and washers  
Functional conditions  
Automatic switch off  
The light switches off when one of the following  
events occurs.  
✓ Engine compartment lid closed.  
✓ Luggage compartment lid closed.  

Related Topics

Lighting, windscreen wipers and washers
Exterior lighting COMING HOME, LEAVING HOME exterior lighting Light Assist high-beam assist system Dynamic Light Assist headlight assist system Interior lighting Interior ambient light Windscreen wipers and washers

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot