2016-2023 Skoda Superb SUV Starting and driving User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and driving for Your Skoda Superb SUV Third Generation (2016-2023)

Starting and driving › Start 163  
Trip overviews.  
Notification if alarm triggered.  
Starting and driving  
Start  
Localisation service notifications, such as, for ex-  
ample, location, area or speed notifications  
Vehicle search using horn and flashing signals.  
Remote controlled vehicle locking and unlocking.  
Operation of the auxiliary heating.  
Starting instructions  
DANGER  
Danger of poisoning by exhaust gases!  
Do not run the engine in an enclosed space.  
Function conditions  
The vehicle key is located in the vehicle interior.  
Conditions  
The service and the coupled functions are available  
depending on the following conditions.  
NOTICE  
Risk of key loss, possibly of key damage!  
The system can detect the key even if it has been  
forgotten on the vehicle roof.  
The vehicle type, vehicle equipment and Infotain-  
ment type are supported.  
Always keep the key with you.  
Configured protection level of personal data.  
The ŠKODA Connect services are active.  
The ŠKODA Connect services are available.  
Switching the ignition on and off  
Press the starter button.  
Start vehicle with manual transmission  
Secure the vehicle with the parking brake.  
Move the shift lever to the neutral position.  
Keep the clutch pedal depressed.  
Press the starter button.  
Start vehicle with automatic transmission  
Secure the vehicle with the parking brake.  
Keep the brake pedal depressed.  
Move the selector lever to position or  
Press the starter button.  
.
In vehicles with diesel engines, the warning light  
lights up after the ignition is switched  
system on. The engine starts after  
- glow plug  
.
CAUTION  
Danger of unexpected vehicle movement!  
At temperatures below -10°C, start the vehicle  
with the selector lever in the position.  
Stopping the engine  
Secure the vehicle with the parking brake.  
Press the starter button.  
WARNING  
Steering lock hazard!  
During a journey with the engine stopped, the igni-  
tion must always be switched on.  
NOTICE  
Risk of engine overheating!  
Do not switch the engine off immediately at the  
end of your journey after the engine has been run-  
ning at high loads. Leave it to run at an idling speed  
for about 1 minute.  
164 Starting and driving › Starting issues  
Functionality  
Starting issues  
Troubleshooting  
If the system determine that the engine is not nee-  
ded when the vehicle stops, it turns off the engine  
and starts it again when moving off.  
NOTICE  
Risk of engine damage!  
Vehicle with manual transmission  
Do not start the vehicle by towing.  
A system-related engine shutdown takes place when  
the vehicle is stopped, when the gear lever is shifted  
into neutral and when the clutch pedal is released.  
The engine does not start  
Switch off the ignition.  
Wait 30 seconds and repeat the starting proce-  
dure.  
A system-related engine start occurs when the  
clutch pedal is pressed down.  
If the engine does not start, start the vehicle using  
another vehicle's battery » page 199 or get help  
from a specialist company.  
Vehicle with automatic transmission  
A system-related engine switch-off occurs when the  
brake pedal is actuated and the engine is stopped.  
The engine does not start, the display shows a  
message regarding the immobilizer  
A system-related engine start occurs when the ac-  
celerator pedal is pressed down. When the Auto  
Hold function is deactivated, a system-related en-  
gine start occurs after releasing the brake pedal.  
Use the other vehicle key.  
If the engine does not start, seek the help of a spe-  
cialist garage.  
Status display in the instrument cluster display  
- Engine is switched off by the START-  
STOPSystem  
Starting is not possible with the starter button, the  
system did not detect the key  
illuminates  
- Engine is switched off by the START-  
STOPSystem not switched off due to func-  
tional conditions not being met  
Press the starter but-  
ton with the key.  
Display of detailed information in the infotainment  
screen  
If the engine does not  
start, seek the help of a  
specialist garage.  
Vehicle status  
Or:  
Vehicle status  
Functional conditions  
The key might not be detected if the battery in  
the key is nearly discharged or the signal is faulty.  
Some conditions are system-related and cannot be  
influenced or recognized. Therefore, the system may  
react differently in situations which seem identical  
from the driver's perspective.  
The engine cannot be turned off with the starter  
button  
Hold the starter button or press twice.  
The driver must meet the following conditions.  
The radiator fan keeps running even after the en-  
gine has stopped  
The radiator fan can continue to run for approxi-  
mately 10 minutes after the engine is stopped. This is  
not a defect.  
The driver's door is closed.  
The driver has fastened the seat belt.  
The driving speed was higher than 4 km/h after  
the last stop.  
The engine makes noises after the cold start  
The increased running noise is due to the briefly in-  
creased engine speed. This is not a defect.  
Settings  
Automatic activation  
Upon start-up of the engine.  
START STOP  
Usage  
By selecting the driving mode Eco » page 167, Op-  
eration.  
Deactivate / activate system  
Press the button.  
The START-STOPSystem reduces polluting emis-  
sions and CO2emissions and saves fuel.  
Starting and driving › Manual gearbox 165  
When the system is deactivated, the symbol lights  
up in the button  
In mode the gear is changed at higher speeds  
.
than in mode  
.
Select between and (sprung position)  
If a system-related engine switch-off occurs and the  
system is deactivated, the engine will start.  
Selector lever out of position or solve  
lights up - the selector lever is locked  
Troubleshooting  
Press the brake pedal,  
The engine does not switch off when stopping, or  
it starts before starting up  
The system has detected that the engine is running.  
and at the same time,  
press the button in the  
selector lever.  
Manual gearbox  
Operation  
NOTICE  
Danger of engine damage!  
WARNING  
Shift to a higher gear before reaching the red area  
on the tachometer scale.  
Danger of the vehicle rolling away automatically!  
When the selector lever is in the position  
,
or  
in manual shift mode, secure the vehicle with the  
brake.  
NOTICE  
Danger of gearbox damage!  
Fully depress the clutch pedal when changing gear.  
When not shifting gear, do not put your hand on  
the shift lever.  
Operation  
Start up  
Engaging reverse gear  
Stop the vehicle.  
Fully depress the clutch.  
Move the shift lever to the neutral position.  
Push the shift lever down.  
Turn it completely to the left.  
Wait briefly.  
Engage reverse gear.  
Keep the brake pedal depressed.  
Start the engine.  
Press the button on the selector lever and set it to  
the desired position.  
Release the brake pedal and press the accelerator  
pedal lightly.  
Speeding up while driving (kick-down)  
Fully depress the accelerator.  
Stopping temporarily (e.g. at a junction)  
Automatic gearbox  
Selector lever positions  
Parked vehicle  
Leave the selector lever in the position  
cure the vehicle with the brake pedal.  
and se-  
Stop  
Keep the brake pedal depressed.  
Secure the vehicle with the parking brake.  
Press the button in the selector lever and bring it  
to the position adjust.  
The drive wheels are  
locked.  
Only adjust he po-  
sition when the vehi-  
cle is stationary.  
Turn off the engine.  
Drive in neutral  
Reverse gear  
If the system detects that no gear is engaged while  
driving, it automatically switches to neutral position.  
Only adjust he po-  
sition when the vehi-  
cle is stationary.  
It will  
be displayed in the instrument cluster.  
Idle position  
There is no transmission of engine power to the  
wheels.  
Forward drive / sports program  
The gear is changed automatically.  
Requirements for driving in neutral position  
The mode is selected.  
Neither the accelerator nor the brake pedal is  
pressed.  
The vehicle speed is 20-130 km/h.  
No device is connected to the trailer socket.  
166 Starting and driving › Automatic gearbox  
Acceleration on start-up (launch control)  
This function allows maximum acceleration during  
start-up.  
illuminates together with  
Message regarding the gearbox overheating  
You may continue driving, exercising appropriate  
caution.  
Select the mode or manual shift mode.  
Disable the TCS » page 173.  
Keep the brake pedal depressed.  
Fully depress the accelerator.  
illuminates together with  
or  
Release the brake pedal.  
illuminates together with  
Message regarding the gearbox overheating  
The vehicle drives with maximum acceleration.  
Manually switching gear with the selector lever  
Stop driving! Stop the vehicle and stop the engine.  
After the indicator light goes out, your journey can  
continue.  
If the warning light does not go out, stop driving!  
Get the help of a specialist company.  
To turn on, move the selector lever  
(to the left for right-hand drive vehicles).  
to the right  
To turn off, move the selector lever back into posi-  
tion  
.
Upshift  
+
-
Gearbox impaired  
illuminates together with  
Downshift  
or  
illuminates together with  
Message regarding the gearbox in emergency  
mode  
You may continue driving, exercising appropriate  
caution.  
Immediately seek the help of a specialist company.  
Manually changing gear with the shift paddles on  
the steering wheel  
illuminates together with  
Downshift  
Upshift  
-
+
or  
illuminates together with  
Message regarding a gearbox fault  
To turn on, press the  
+
shift paddle - or  
.
Stop driving! Get the help of a specialist company.  
To turn off, hold the  
+
shift paddle  
.
Starting the stuck vehicle  
Adjust the selector lever quickly between  
. The vehicle will then start to rock and be easier  
to free.  
If none of the shift pad-  
dles are pressed for a  
certain time, manual shift  
and  
mode turns off automatically.  
If the engine threatens to over-rev  
Mechanical release of the automatic gearbox  
The gearbox automatically changes to the next  
higher gear.  
Secure the vehicle with the parking brake.  
Open the stowage compartment in the front cen-  
The transmission prevents changing to the next  
lower gear.  
tre console.  
Insert a flat-head  
screwdriver or push a  
similar tool into the  
gap in the arrow area  
A .  
Troubleshooting  
The selector lever cannot be moved out of posi-  
tion in the normal way  
Mechanically unlock the selector lever » page 166.  
Carefully loosen and  
lift the cover of the  
shift gate.  
Gearbox overheated  
illuminates together with  
or  
Starting and driving › Vehicle driving mode 167  
Operation  
Select driving mode  
Press on the plastic  
part in the direction of  
the arrow and at the  
same time press the  
button on the selector  
lever.  
Press the button.  
In the Infotainment, a driving mode menu appears.  
Move selector lever to  
position  
.
Vehicle driving mode  
Usage  
The driving mode offers the possibility of adapting  
the driving behaviour to the desired driving style.  
A
Information about system settings of the cur-  
rently selected mode / system settings for the  
selected Individual mode  
B
Driving mode menu  
Overview  
B.  
Tap the corresponding functional surface  
Or:  
Information about the selected driving mode is dis-  
played in the status bar in the Infotainment screen as  
well as in the digital instrument cluster.  
Press the  
button again.  
Eco mode  
After switching on the ignition, Normal mode is  
automatically selected.  
Eco mode is suitable for a relaxed style of driving and  
helps to save fuel.  
Troubleshooting  
Comfort mode  
Adaptive DCC suspension faulty  
Comfort mode is suitable for driving on roads with  
poorer surface or for long motorway journeys.  
illuminates together with  
Normal mode  
or  
illuminates together with  
Normal mode is suitable for conventional driving.  
Continue driving with appropriate caution. Get  
the help of a specialist company.  
Sport mode  
Sport mode is suitable for a sporty driving.  
Individual mode  
Economical driving style  
Individual mode enables certain vehicle systems to  
be customised.  
Tips for economical driving style and  
evaluation of driving economy  
Offroad mode  
Tips for economical driving  
Offroad mode is suitable for driving on non-paved  
roads. But even with Offroad mode switched on,  
your vehicle is never a true SUV.  
Avoid unnecessary acceleration and braking.  
Display the gear recommendation in the instru-  
ment cluster display  
Avoid full acceleration and excessive speeds.  
Avoid engine idling during longer periods of sta-  
tionary time.  
Do not warm up the engine while the vehicle is sta-  
tionary. If possible, start your journey as soon as  
the engine starts.  
Observe the prescribed tyre pressure » page 208.  
Remove unnecessary ballast.  
The following brake and stabilisation systems  
change in Offroad mode.  
ESC.  
ASR.  
EDL.  
ABS.  
If Offroad mode is switched on,  
and in the in-  
strument cluster.  
168 Starting and driving › Towing a trailer  
Remove the roof rack when it is not needed.  
Switch on electric consumers only for as long as  
necessary.  
Consumption-friendly driving  
There is a slight reduction in fuel consumption in the  
following situations.  
cluster.  
lights up in the instrument  
Do not leave the windows open while driving.  
The active cylinder management has temporarily  
deactivated some cylinders of the engine (applies  
to certain engine types).  
A vehicle with automatic transmission rolls in neu-  
tral position.  
Display of evaluation in the infotainment screen  
DriveGreen  
Or:  
DriveGreen  
Towing a trailer  
What you should be mindful of  
WARNING  
When driving with a trailer, special care is required!  
NOTICE  
With frequent towing, the vehicle is excessively loa-  
ded so this must also be checked between service  
intervals.  
A
B
Driving fluid display  
When the driving is fluid, the display is located  
near the green dot.  
Recommendations for using a trailer  
Adjust the tyre pressure on the vehicle for full load.  
Sheet  
Do not exceed the maximum permissible total  
weight of the vehicle and the combination weight  
specified in the technical vehicle documentation  
(e.g. in the vehicle registration documentation, in  
the COC document) and on the type plate.  
The greener the leaf, the more economic the  
driving style. Tapping the screen in the area of  
the sheet displays tips for reducing fuel and en-  
ergy consumption.  
C
D
Driving economy diagram  
For trailer operation, consider the current load con-  
dition of the vehicle as well as the distribution of  
the load in the trailer. The coupled trailer increases  
the rear axle load and can therefore reduce the  
payload.  
Adjust the headlight range of the headlights ac-  
cording to the load status of the vehicle. The front  
of the vehicle may lift up when a trailer is being  
towed and the headlights may dazzle other road  
users.  
Each bar indicates driving efficiency in 5 second  
increments. The current bar is on the left. The  
higher the green bars, the more economical the  
driving style.  
Points system (0-100)  
The higher the indicated value, the more eco-  
nomical the driving style. By tapping the screen  
in the area of value D , a rating of the last 30 mi-  
nutes of driving is displayed.  
A speed of 100 km/h should not be exceeded.  
E
F
Average fuel consumption  
Reduce the speed by releasing the accelerator  
pedal as soon as a pendulum movement of the  
trailer is noticeable. Never attempt to stop the  
trailer from swaying by accelerating.  
Tapping the screen in area of value E displays  
the average fuel consumption over the past 30  
minutes.  
Information about the current driving style  
If the traffic area behind the trailer can not be  
viewed, install additional exterior mirrors.  
Apply the brakes in good time. If the trailer is fitted  
with a trailer brake, apply the brakes gently at first,  
then brake firmly. This will avoid brake jolts result-  
ing from the trailer wheels locking.  
Economical driving style  
The speed has a negative effect on fuel con-  
sumption  
The ride is not smooth  
Recommended gear  
Select a lower gear before descending to also use  
the braking force of the engine.  
In Infotainment it is possible to display up to  
three consumers that are currently making up the  
largest share of fuel consumption.  
Consumer comfort  
Or:  
Distribution of the load over the vehicle and trailer  
combination  
Secure heavy objects against slipping, as close to  
the trailer axle as possible.  
Consumer comfort  
Starting and driving › Towing eye and towing procedure 169  
Transport small and light objects in the luggage  
compartment.  
Permitted trailer loads  
The details in the technical vehicle documentation take precedence over the information in this Owner's Man-  
ual.  
WARNING  
Risk of an accident!  
Do not exceed the permissible trailer load.  
Engine type  
Gearbox  
Permissible trailer load,  
braked (kg) a)  
Permissible trailer load, un-  
braked (kg)  
Superb  
Superb Com-  
bi  
Superb  
Superb Com-  
bi  
1.4 l/110 kW TSI  
1.5 l/110 kW TSI  
Manual gear-  
box  
1600  
1600  
710  
720  
DSG b)  
1600  
1600  
1600  
1600  
720  
720  
730  
730  
Manual gear-  
box  
DSG b)  
1600  
1800  
2000  
2200  
2200  
1500  
1500  
2000  
1600  
1800  
2000  
2200  
2200  
1500  
1500  
2000  
730  
750  
750  
750  
750  
750  
750  
750  
740  
750  
750  
750  
750  
750  
750  
750  
DSG b)  
2.0 l/140 kW TSI  
2.0 l/162 kW TSI  
2.0 l/200 kW TSI  
2.0 l/206 kW TSI  
1.6 l/88 kW TDI CR  
2.0 l/90 kW TDI CR  
2.0 l/110 kW TDI CR  
DSG b)  
DSG b) 4x4  
DSG b) 4x4  
DSG b)  
DSG b)  
Manual gear-  
box  
DSG b)  
2000  
2000  
2000  
2200  
2000  
2200  
2000  
2000  
2000  
2200  
2000  
2200  
750  
750  
750  
750  
750  
750  
750  
750  
750  
750  
750  
750  
DSG b)  
2.0 l/130 kW TDI CR  
2.0 l/140 kW TDI CR  
DSG b)  
DSG b) 4x4  
DSG b)  
2.0 l/147 kW TDI CR  
DSG b) 4x4  
a)  
With gradients up to 12%.  
b)  
Automatic dual-clutch transmission.  
Remove the cover cap at the rear  
Towing eye and towing procedure  
Towing eye  
Press on the cover cap  
and remove it.  
Remove the front cover  
Press on the cover cap  
and remove it.  
170 Starting and driving › Brakes  
Install the towing eye  
Instructions for the driver of the pulling vehicle  
Drive slowly and smoothly.  
Only accelerate once the rope is taut.  
Screw in the towing  
eye.  
Insert the wheel  
wrench or similar ob-  
ject through the tow-  
ing eye.  
Tighten the towing  
eye.  
Instructions for the driver of the towed vehicle  
Move the shift lever to the neutral position or the  
selector lever to the position.  
If it is not possible to start the engine, switch on  
the ignition!  
WARNING  
Risk of accident!  
When the ignition is switched off, the brake booster  
and the power steering do not work. In addition,  
there is a risk that the steering lock will engage.  
After the towing process  
Unscrew the towing eye.  
Insert the cover cap.  
If it is not possible to start the engine, switch on  
the ignition!  
Towing the vehicle  
Brakes  
WARNING  
Risk of accident!  
What you should be mindful of  
The tow rope must not be twisted.  
WARNING  
When towing, drive at a speed of max. 50 km/h.  
Problems and faults with the brake system can ex-  
tend the braking distance of the vehicle!  
DANGER  
Danger of a functional restriction of the brake boos-  
ter!  
When braking in a vehicle with manual transmis-  
sion, when the vehicle is in gear and at low revs,  
depress the clutch pedal.  
DANGER  
Danger of the brakes overheating!  
WARNING  
Risk of accident!  
Use a braided synthetic fibre rope for towing. Do  
not use a twisted tow rope.  
Do not depress the brake pedal if you do not need  
to brake.  
If the original front spoiler is damaged, ensure the  
air supply to the front brakes is guaranteed.  
NOTICE  
Always keep the tow rope taut during towing.  
Do not exceed a towing distance of 50 km.  
Check the brake fluid level  
NOTICE  
Risk of gear damage!  
Test conditions  
The vehicle is on a horizontal surface.  
If the gearbox no longer contains any oil, the vehi-  
cle must only be towed with the front axle raised  
clear of the ground or transported on a special  
breakdown vehicle.  
The engine is off.  
Checking  
The fill level must be in  
the marked area.  
Vehicles with an automatic transmission must not  
be towed without the ignition switched on or with  
the rear axle raised.  
If the level is below the  
mark  
tinue.  
, do not con-  
Where should the tow rope or the tow bar be se-  
cured?  
At the front towing eye.  
On the towing eye at the back.  
On the ball bar of the factory-installed towing de-  
vice.  
Do not refill liquid.  
Get the help of a spe-  
cialist company.  
If the brake fluid level is  
too low, a light will be  
displayed in the instrument cluster.  
However, we  
Starting and driving › Electric parking brake 171  
recommend that you regularly check the brake fluid  
Manual switching on  
level directly on the reservoir.  
Pull on the button  
and hold it.  
WARNING  
Danger of brake failure!  
If the fluid level falls significantly within a short time  
or drops below the mark  
have become leaky.  
The following symbols  
light up.  
, the brake system may  
in the button.  
in the instrument  
Stop driving! Get the help of a specialist company.  
cluster.  
Specification  
The brake fluid must comply with standard  
VW 501 14. This standard complies with the require-  
ments of the FMVSS 116 DOT4 standard.  
Automatic shutdown  
The parking brake switches off automatically when  
starting up.  
Changing  
Have the brake fluid replaced by a specialist garage.  
If there is an automatic shutdown e.g. to prevent  
starting on a slope, keep pulling the button  
WARNING  
Danger of brake failure!  
If the brake fluid change date is exceeded, heavy  
braking may cause vapour bubbles to form in the  
brake system.  
.
Automatic shutdown conditions  
Driver's door is closed, in some cases, the driver's  
seat belt is also fastened.  
Manual shutdown  
With the ignition  
Troubleshooting  
switched on, press the  
brake pedal and at the  
same time push the  
Brake fluid level is too low  
illuminates  
button.  
.
Stop driving! Get the help of a specialist  
company.  
Brake system and anti-lock braking system faulty  
illuminates together with  
Stop driving! Get the help of a specialist  
company.  
Troubleshooting  
Parking brake error  
Brake pads worn  
illuminates  
Drive to a specialist garage with appropriate  
careful driving.  
illuminates  
Message regarding a parking brake error  
Braking effect reduced  
Moist, frozen, salted or corroded brakes can impair  
the braking effect.  
Seek the help of a specialist garage.  
Parking on a steep slope  
Clean the brakes by braking repeatedly if the traffic  
conditions allow it.  
flashes  
Notification regarding parking position on a steep  
When the engine is stopped, the brake booster  
does not work  
Depress the brake pedal more forcefully.  
slope  
Go to another parking spot where there is less of a  
slope.  
Noise when using the parking brake  
Noise when using the parking brake is normal. This is  
not a defect.  
Electric parking brake  
Operation  
The vehicle battery is discharged, the parking  
brake cannot be switched off  
WARNING  
Danger of key locking!  
Connect the vehicle battery to a power source,  
such as the battery of another vehicle.  
The recessed grip for the fingers in front of the  
button  
must remain free.  
172 Starting and driving › Auto Hold automatic holding function  
Emergency braking when the brake system is  
faulty  
Settings  
Activation/deactivation  
Press the  
button.  
Turn on  
Activation displayed in the button by the illumina-  
Pull on the button  
and hold it.  
tion of the  
symbol.  
NOTICE  
The vehicle starts to  
brake strongly and an  
audible signal is emit-  
ted.  
Disable Auto Hold to allow the vehicle to roll if nec-  
essary when driving through a car wash.  
Turn off  
Let go of  
the button.  
Or:  
Depress the accelerator pedal.  
Auto Hold automatic holding function  
Usage  
Auto Hold automatically secures the vehicle from  
rolling away when stopped.  
Functionality  
WARNING  
Risk of accident!  
Auto Hold is not able to stop the vehicle under all cir-  
cumstances, such as on slippery ground, or on gradi-  
ents.  
Secure and release the vehicle  
When stopping , the vehicle is automatically secured  
by Auto Hold ..  
lights up in the instrument cluster.  
The brake pedal can be released.  
When starting up , the vehicle is automatically re-  
leased by Auto Hold .  
Automatic locking by the parking brake  
The vehicle may be secured by the parking brake un-  
der certain circumstances.  
ment cluster.  
lights up in the instru-  
Functional conditions  
The driver's door is closed.  
The engine is running or is switched off by the  
START-STOPSystem.  
Auto Hold is activated.  
In vehicles with an automatic gearbox, the selec-  
tor lever is not in mode.  

Related Topics

Popular Owner Manuals