214 Storage space and interior equipment › Net partition
Fold up
Unfold the variable loading floor in the upper posi-
tion.
›
Remove the rear bar
from the hooks.
›
Place the rear bar on
›
Net partition
the front bar and press
it together at both
ends.
Attach the net partition
Attach at the back
Open the lid of the roll-
up cover.
›
Remove and insert
Remove
Remove the roll-up cover.
Take out the folded pocket in an upwards direc-
tion.
›
›
Pull out the net parti-
tion.
Insert the crossbar into
the mount on one side
and push it forwards.
›
Insert
Insert with marked
›
›
end of the bar in the
right holder and in
the left holder.
Fix the bar in the same
way on the other side.
›
Open the lid of the
roll-up cover.
›
Fasten in the front
The procedure is analogous to the process behind.
Stow the bag under the variable loading floor
Before installing, fold back the rear seat backrests.
Fold the variable loading floor in the upper position.
Open and remove the side compartments.
›
›
Releasing
Open the lid of the roll-up cover.
Move the rod first to one side and then to the oth-
er side, and take it out of the supports.
Hold the pole and allow the net partition to slowly
roll in.
›
Remove the left cover.
›
›
›
›
Open the lid of the roll-up cover.
Remove housing and insert
Removal
Insert the bag in the
recesses in the side
panel.
›
Fold the rear seat backrests forwards.
›
Open the door at the right rear.
›
Move and swing out
the housing.
›
If the multifunctional
bag and the roll-up
cover are stowed away
at the same time, the
roll-up cover in the rear
area must cover the
multifunctional bag.
Reinstall the left cover and side compartments.
›
English 
