Get Storage space and interior equipment -> Variable loading floor in the boot Guide for Skoda Superb SUV Third Generation (2016-2023)

216 Storage space and interior equipment › Roll-up luggage compartment cover

Stowing the cover under the variable loading ﬂoor

Roll-up luggage compartment cover

Fold the variable loading ﬂoor in the upper position.

Open and remove the side compartments.

›

Operation

Extending

Remove the left cover.

›

Pull out the cover on

the handle until it clicks

into place.

›

Insert the cover into

the recesses of the

side panel.

›

Retracting

Press the cover in the

handle area.

›

If the roll-up cover and

the multifunction bag

are stowed at the same

time, the roll-up cover

must cover the multi-

function bag at the

back.

The cover rolls up to

the intermediate posi-

tion A .

Press again to fully

open the cover.

Replace the left cover and the side compartments.

Unfold the variable loading ﬂoor in the upper posi-

›

It is possible that the

cover rolls more slowly

during winter weather

tion.

conditions.

Variable loading ﬂoor in the boot

Settings

Setting the position

Automatic rewinding of the cover to the inter-

mediate position

The cover automatically rolls into the intermediate

The maximum load of the variable loading ﬂoor is

75 kg.

Set the variable loading ﬂoor to the upper position

position when the boot lid is opened.

Lift the variable loading

ﬂoor.

The function is activated or deactivated in the fol-

lowing menu in the Infotainment system.

›

Pull the variable load-

›

ing ﬂoor towards you

and raise it to the

height of the roll-up

cover until you hear an

audible click.

Or:

Removing and inserting

Press the variable load-

ing ﬂoor forward and

hang up.

›

Take out and insert the roll-up cover

Press the end of the

crossbar and take out

or insert the cover.

›

Storage space and interior equipment › Storage compartment under the variable loading ﬂoor 217

Install in the lower position

Storage compartment under the variable

Lift the variable loading

ﬂoor.

Pull the variable load-

ing ﬂoor towards you

until it sinks down into

the lower position.

loading ﬂoor

›

Press the variable load-

ing ﬂoor forward and

hang up.

›

Fold the variable loading ﬂoor together

Lift the variable load ﬂoor and move it forwards.

The variable loading ﬂoor is folded down in the

›

Partition in the boot

Removing and inserting

central area.

Fold the variable loading ﬂoor forwards.

›

Removing and inserting the partition

The partition prevents the cargo from slipping.

Dividing the boot

Lift the variable loading

›

The maximum load for the partition is 10 kg.

ﬂoor and push the rear

edge into the grooves

A .

To remove, pull the se-

›

curing tab on both

sides upwards and out-

wards and remove the

partition.

Depending on the equipment, the vehicle can be

equipped with a washable storage compartment un-

der the variable loading ﬂoor.

To insert engage the

partition in the ﬁxing

›

points A . B or C .

Remove fastening element and insert

The fastening element prevents the cargo from slip-

ping.

The fastening element is attached to the partition on

the variable loading ﬂoor.

Storage space and interior equipment -> Variable loading floor in the boot for Your Skoda Superb SUV Third Generation (2016-2023)

Related Topics

Popular Owner Manuals

Latest Owner Manuals