2024-2026 Skoda Superb SUV Driver assist systems -> Speed limiter User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driver assist systems -> Speed limiter for Your Skoda Superb SUV Fourth Generation (2024-2026)

Driver assist systems › Pedestrian detection system 177  
At a driving speed of up to 30 km / h, the vehicle is  
braked without prior warning.  
Or:  
illuminates together with  
Automatic braking can be stopped by pressing the  
accelerator pedal or by a steering intervention.  
Clean the front radar sensor.  
Stop the engine and start again.  
If Front Assist is still unavailable, check the brake  
lights on the vehicle or on the attached trailer.  
With automatic braking, the pressure in the brake  
system increases. The brake pedal cannot be operat-  
ed by using the pedal as normal.  
If the brake lights are working and Front Assist is  
still unavailable, seek the help of a specialist ga-  
rage.  
WARNING  
Risk of an accident!  
Front Assist does not respond to crossing or oncom-  
ing vehicles.  
There was an unfounded warning or system inter-  
vention  
Clean the front radar sensor.  
If the system is not working properly, disable Front  
Assist and seek the help of a specialist garage.  
Operating conditions  
The parking aid is activated.  
The driving speed is higher than 5 km/h.  
Pedestrian detection system  
Functionality  
Function restriction  
The function may be restricted or unavailable in the  
following cases:  
Pedestrian recognition helps to prevent a collision  
with crossing pedestrians by enabling automatic  
braking interventions.  
About 30 seconds after starting  
When driving around a sharp bend  
During an ESC intervention  
Status display in the instrument cluster display  
lights up - Danger of collision  
Risk of collision in a speed range of 5-30 km/h  
The system triggers automatic braking.  
Settings  
Automatic activation  
Front Assist is automatically activated when the igni-  
tion is switched on.  
Risk of collision in a speed range of 30-60 km/h  
The system warns of a collision hazard first. If the  
driver does not respond, the vehicle is automatically  
braked.  
Activation/deactivation in the instrument cluster  
Press the button on the multifunction steering  
wheel.  
Operating conditions  
Select Front Assist  
.
Activation/deactivation in Infotainment  
In the menu  
Front Assist is deactivated.  
The vehicle speed is 5-60 km/h.  
.
Show system deactivation in the display of the in-  
strument cluster  
Speed limiter  
Functionality  
illuminates together with  
or  
The speed limiter controls the maximum driving  
speed according to the set speed limit.  
illuminates together with  
If the limit is exceeded when driving downhill, brake  
the vehicle with the brake pedal.  
Deactivate Front Assist when handling the vehi-  
cle on a truck, a car ferry etc.  
Status display in the instrument cluster display  
illuminates - the cruise control is activated.  
flashing - the set limit is exceeded  
Troubleshooting  
When the regulation starts  
set limit is displayed.  
highlighted and the  
Front Assist is not available  
illuminates together with  
178 Driver assist systems › Cruise control system  
Variant with ACC  
Operating conditions  
The driving speed is higher than 30 km/h.  
Operation  
Variant with cruise control  
Activate ACC (condition for the subsequent  
activation of the limiter). To enable the speed  
limiter, press the button and in the multi-  
function steering wheel and in the instrument  
A
Activate cruise control (condition for the  
subsequent activation of the limiter).  
To enable the speed limiter, press the button D  
and in the instrument cluster choose the menu  
cluster choose the menu item Speed limit  
.
Resume control 1) / Increase limit in steps of  
1 km/h (sprung position)  
item Speed limit  
.
Deactivate limiter  
Stop control (sprung position)  
Deactivate the limiter  
Interrupt control (sprung position)  
Resume control1) / Increase limit  
B
Increase limit in steps of 10 km/h  
Decrease limit in steps of 10 km/h  
Start control/Reduce limit in steps of 1 km/h  
C
Start control with current speed / Reduce  
limit  
D
Show menu of assist systems - Possibility of  
switching between cruise control and speed lim-  
iter  
Switching to cruise control interrupts the con-  
trol.  
Limit exceeded  
Fully depress the accelerator.  
Control will continue as soon as the vehicle has de-  
celerated to below the set limit.  
Adjusting the speed limit with the buttons B and  
C
Troubleshooting  
By pressing in steps of 1 km/h.  
Speed limiter faulty  
By holding in steps of 10 km/h.  
illuminates  
Seek the help of a specialist garage.  
Cruise control system  
Functionality  
The cruise control system maintains the set speed  
without the accelerator pedal having to be operated.  
This, however, is only possible to the extent permit-  
ted by the engine output and braking power of the  
vehicle.  
1)  
If no speed limit is set, the current speed is set as the speed limit.  

Related Topics

Popular Owner Manuals